1993-1997 Chrysler Concorde Workshop Service Repair Manual
Normaler Preis
$141.00
Verkaufspreis
$141.00
Normaler Preis
Grundpreis
/ pro
Verkauf
Ausverkauft
🏷️ Basic Information Identification Make: Chrysler Model: Concorde Generation: First Generation Codes Platform: Chrysler LH Platform 👋 Introduction Market Position Segment: Full-size Luxury Sedan Target Audience: Consumers seeking comfort, spaciousness, and distinctive styling in a domestic sedan. Competitive Analysis Key Competitors: Ford Crown Victoria, Chevrolet Caprice, Buick LeSabre, Oldsmobile Eighty-Eight Key Features Design: Aerodynamic, cab-forward design with a distinctive grille and sleek profile. Interior Space: Roomy cabin offering ample legroom and headroom for passengers. Powertrain: V6 engine offering a balance of performance and refinement. Ride Quality: Comfort-oriented suspension tuning providing a smooth and quiet ride. 📋 Manual Details Coverage Areas Years Covered: 1993, 1994, 1995, 1996, 1997 Page Count Estimated Pages: Approximately 1500+ Manual Type Type: Workshop Service Repair Manual Language Language: English Format Format: Digital (PDF) 📖 Manual Coverage Systems Covered Engine Mechanical: Engine assembly, cylinder head, block, pistons, crankshaft, camshaft, timing system (belts/chains), lubrication, cooling system Engine Performance: Fuel delivery, ignition system, emissions control, exhaust system, engine diagnostics Transmission: Automatic transmission (e.g., 42LE), torque converter, cooler, linkage, hydraulics, electronics Brakes: Front and rear disc brakes, ABS system (if equipped), parking brake, hydraulic system, components Suspension: Front suspension (MacPherson struts), rear suspension (multi-link), steering system, wheel alignment Electrical System: Battery, charging system, starting system, lighting, wipers, horn, power accessories (windows, locks, seats), fuses, relays, wiring diagrams HVAC: Heating, ventilation, air conditioning system, components, refrigerant, diagnostics Body And Trim: Exterior body panels, interior trim, doors, hood, trunk, glass, bumpers, weatherstripping Chassis And Frame: Frame construction, subframes, body mounts Procedures Included Maintenance: Oil changes, filter replacements, fluid checks and changes, tune-ups, spark plug replacement, belt inspection and replacement Diagnostics: Troubleshooting guides, symptom-based diagnostics, diagnostic trouble codes (DTCs), electrical system testing Repair: Component removal and installation, engine rebuilding, transmission overhaul, brake service, suspension repair, electrical component replacement Reassembly: Torque specifications for all critical fasteners, assembly sequences Technical Depth Depth: Comprehensive: Covers everything from routine maintenance to complete engine and transmission rebuilds, including detailed diagnostics and electrical troubleshooting. 📊 Manual Specifications File Format File Type: PDF Print Quality Quality: High-resolution scans for clear text and diagrams Binding Type Binding: Not Applicable (Digital Format) Paper Type Paper: Not Applicable (Digital Format) Features Searchable: Yes, text-searchable PDF for quick information retrieval Printable: Yes, printable pages for on-the-go reference ⚙️ Engine Specifications Primary Engine Engine Code: EER (3.5L V6) Displacement: 3.5 Liters (213.8 cubic inches) Configuration: V6, Overhead Valve (OHV) Bore X Stroke: 3.92 in x 3.31 in (99.5 mm x 84.1 mm) Compression Ratio: 8.4:1 Horsepower: 147 hp @ 4500 rpm (1993-1995), 158 hp @ 4500 rpm (1996-1997) Torque: 180 lb-ft @ 3200 rpm (1993-1995), 195 lb-ft @ 4000 rpm (1996-1997) Performance 0 60 Mph: Approximately 9.5 - 10.5 seconds Fuel System Fuel Delivery: Sequential Multiport Fuel Injection (MPI) Fuel Type: Unleaded Regular (87 Octane) Fuel Tank Capacity: 16.0 gallons 🔧 Transmission Standard Transmission Type: 4-Speed Automatic Transmission Model: Chrysler 42LE Features Overdrive: Yes, with lock-up torque converter Manual Control: No (fully automatic) 📐 Dimensions Exterior Length: 201.4 inches Width: 74.9 inches Height: 55.8 inches Wheelbase: 113.0 inches Front Track: 62.1 inches Rear Track: 61.5 inches Interior Front Headroom: 39.7 inches Front Legroom: 42.1 inches Rear Headroom: 38.7 inches Rear Legroom: 40.4 inches Shoulder Room Front: 59.6 inches Shoulder Room Rear: 59.0 inches Hip Room Front: 56.2 inches Hip Room Rear: 55.9 inches Cargo Trunk Volume: 18.0 cubic feet Weights Curb Weight: Approximately 3,600 - 3,750 lbs Gross Vehicle Weight Rating: Approximately 4,600 lbs Towing Capacity: Not Recommended/Available 🛡️ Safety Features Ratings NHTSA Frontal Impact Driver: Could vary by year, generally considered adequate for the era. NHTSA Frontal Impact Passenger: Could vary by year, generally considered adequate for the era. Active Features ABS: Standard on most trims, optional on earlier base models. Passive Features Airbags: Driver and front passenger airbags standard. Seatbelts: Front and rear seat belts, driver's side pretensioner. Child Seat Anchors: LATCH system not standard in this era. Side Impact Beams: Integrated into the body structure. 💡 Technology Features Infotainment Audio System: Factory AM/FM stereo with cassette player, optional CD player, and premium Infinity audio system. Climate Control: Manual climate control, optional automatic climate control with digital display. Driver Assistance Cruise Control: Standard feature. Traction Control: Optional on some higher trims in later years. Connectivity Cellular Integration: Not applicable. Bluetooth: Not applicable. 🔧 Maintenance Service Intervals Oil Change: Every 3,000 - 5,000 miles or 3-6 months, depending on oil type and driving conditions. Air Filter Replacement: Every 12,000 - 15,000 miles or annually. Spark Plug Replacement: Every 30,000 - 60,000 miles (depending on plug type, e.g., platinum). Coolant Flush: Every 30,000 - 50,000 miles or 2-3 years. Transmission Fluid Change: Every 30,000 - 60,000 miles (recommend checking fluid condition). Fluid Specifications Engine Oil: API SG/SH, SAE 5W-30 (or 10W-30 depending on temperature). Check owner's manual for specific recommendations. Transmission Fluid: ATF+3 (Chrysler specification)...
Torque specifications for all critical fasteners, assembly sequences
Technical Depth
Depth:
Comprehensive: Covers everything from routine maintenance to complete engine and transmission rebuilds, including detailed diagnostics and electrical troubleshooting.
📊 Manual Specifications
File Format
File Type:
PDF
Print Quality
Quality:
High-resolution scans for clear text and diagrams
Binding Type
Binding:
Not Applicable (Digital Format)
Paper Type
Paper:
Not Applicable (Digital Format)
Features
Searchable:
Yes, text-searchable PDF for quick information retrieval
Printable:
Yes, printable pages for on-the-go reference
⚙️ Engine Specifications
Primary Engine
Engine Code:
EER (3.5L V6)
Displacement:
3.5 Liters (213.8 cubic inches)
Configuration:
V6, Overhead Valve (OHV)
Bore X Stroke:
3.92 in x 3.31 in (99.5 mm x 84.1 mm)
Compression Ratio:
8.4:1
Horsepower:
147 hp @ 4500 rpm (1993-1995), 158 hp @ 4500 rpm (1996-1997)