Aprilia Pegaso 655 1996 Full Service Repair Manual
Normaler Preis
$133.00
Verkaufspreis
$133.00
Normaler Preis
Grundpreis
/ pro
Verkauf
Ausverkauft
🏷️ Basic Information Identification Make: Aprilia Model: Pegaso 655 Year: 1996 Codes Chassis Code: AP74A (likely, based on Aprilia nomenclature for this era) Engine Code: Rotax 654F (common for this model) 👋 Introduction Market Position Target Audience: Professional technicians and DIY mechanics/enthusiasts. Value Proposition: Provides the same comprehensive information used by professional mechanics, enabling users to effectively maintain, repair, and restore their Aprilia Pegaso 655. Competitive Analysis Manual Type Competitiveness: Distinguishes itself as a 'Full Service Repair Manual,' implying a higher level of detail and scope than basic owner's manuals or condensed repair guides. Key Features Access Method: Instant digital download, eliminating shipping costs and wait times. Information Density: Highly detailed, covering all diagnostic and repair procedures with sub-steps, notes, cautions, and warnings. 📋 Manual Details Coverage Areas Manual Type: Full Service Repair Manual Language: English Format: PDF File Availability: Instant Download Print Quality: Full Printable Compatibility: All Versions of Windows & Mac Software Requirements: Adobe PDF Reader, WinRAR 📖 Manual Coverage Systems Covered Engine Mechanical: Complete disassembly, inspection, repair, and reassembly of engine components including cylinder head, piston, crankshaft, connecting rods, valvetrain, timing components. Engine Fuel System: Carburetor (likely Mikuni BST40), fuel pump, fuel lines, fuel tank, filtration, and associated linkages. Engine Ignition System: CDI unit, ignition coil, spark plug, wiring, and troubleshooting. Cooling System: Radiator, cooling fan, water pump, thermostat, coolant hoses, and fluid specifications. Exhaust System: Muffler, exhaust pipes, and mounting hardware. Transmission Manual: Gearbox disassembly, inspection, repair, clutch operation, gear selection mechanisms, and lubrication. Drivetrain: Chain drive system, sprockets (front and rear), chain tensioning, and lubrication recommendations. Suspension Front: Telescopic fork (likely Marzocchi or Paioli), internal components, oil levels, seals, and adjustments. Suspension Rear: Monoshock absorber, linkage system, swingarm, bearings, and adjustments. Braking System Front: Disc brake caliper, master cylinder, brake lines, pads, rotors, and bleeding procedures. Braking System Rear: Disc brake caliper, master cylinder, brake lines, pads, rotors, and bleeding procedures. Wheels And Tires: Wheel bearings, spokes, tire pressure, and recommended tire sizes. Electrical System: Battery, charging system (alternator, regulator/rectifier), starter motor, lighting (headlight, taillight, turn signals), horn, wiring harness, fuses, and switches. Chassis And Frame: Frame inspection, headstock bearings, and associated components. Bodywork And Fairings: Panel removal, installation, and repair. Instrumentation: Speedometer, tachometer, warning lights, and sensor connections. Procedures Included Routine Maintenance: Oil changes, filter replacement, chain adjustment, tire pressure checks, spark plug replacement, air filter cleaning/replacement, brake pad inspection. Troubleshooting: Systematic diagnostic procedures for common and uncommon issues across all major systems, including electrical faults. Engine Repair: Full engine rebuilds, top-end overhauls, bottom-end repairs, and component replacements. Transmission Repair: Clutch replacement, gear inspection and replacement, shift drum and fork service. Suspension Service: Fork seal replacement, shock absorber service, linkage bearing maintenance. Brake Service: Brake caliper overhaul, master cylinder rebuild, brake bleeding, pad and rotor replacement. Electrical Diagnostics: Wiring diagram interpretation, circuit testing, component testing for charging, ignition, and lighting systems. Carburetor Tuning: Cleaning, adjustment, and synchronization of the carburetor for optimal performance. Technical Depth Depth Level: Comprehensive: Covers everything from basic user maintenance to full professional-level engine and transmission rebuilds, including advanced electrical diagnostics. Illustrations: Detailed illustrations, drawings, and photos guiding each procedure. Clarity Of Instructions: Numbered step-by-step instructions with detailed sub-steps, notes, cautions, and warnings. Wiring Diagrams: Combined with troubleshooting and electrical service procedures for ease of use. Diagnostic Procedures: All diagnostic and repair procedures covered in great detail. 📊 Manual Specifications File Format Primary Format: PDF Searchability: Likely text-searchable if properly generated, allowing for quick information retrieval. Print Quality Print Capability: Full Printable: Allows users to print specific sections or the entire manual. Binding Type Binding Format: N/A (Digital Download) Paper Type Paper Format: N/A (Digital Download) ⚙️ Engine Specifications Primary Engine Engine Type: Single-cylinder, four-stroke Displacement: 654 cc (approx.) Bore X Stroke: 92.0 mm x 96.0 mm (approx., based on Rotax 654F) Compression Ratio: 10.0:1 (typical for Rotax 654F) Cooling System: Liquid-cooled Performance Horsepower Peak: Approximately 48-50 HP (at the crankshaft, depending on tuning) Torque Peak: Approximately 58-60 Nm (at the crankshaft, depending on tuning) Fuel System Carburetion: Single Mikuni BST40 (standard) Fuel Type: Unleaded gasoline, minimum 91 octane (RON + MON)/2 (equivalent to 87 AKI) Fuel Tank Capacity: Approximately 20-22 liters (refer to manual for exact spec) 🔧 Transmission Standard Type: 5-speed manual transmission Clutch: Wet, multi-plate, cable-actuated Features Final Drive: Chain drive Transmission Fluid: Refer to manual for specific type and capacity (typically SAE 75W/90 or similar gear oil) 📐 Dimensions Exterior Length: Approx. 2150 mm (refer to manual for exact spec) Width: Approx. 850 mm (refer to manual for exact spec) Height: Approx. 1300 mm (refer to manual for exact spec) Weights Dry Weight: Approx. 160-170 kg (refer to manual for exact spec) Wet Weight: Approx. 180-190 kg (fully fueled, refer to manual for exact spec) 🛡️ Safety Features Ratings Safety Features: Dual disc front brakes, single...
AP74A (likely, based on Aprilia nomenclature for this era)
Engine Code:
Rotax 654F (common for this model)
👋 Introduction
Market Position
Target Audience:
Professional technicians and DIY mechanics/enthusiasts.
Value Proposition:
Provides the same comprehensive information used by professional mechanics, enabling users to effectively maintain, repair, and restore their Aprilia Pegaso 655.
Competitive Analysis
Manual Type Competitiveness:
Distinguishes itself as a 'Full Service Repair Manual,' implying a higher level of detail and scope than basic owner's manuals or condensed repair guides.
Key Features
Access Method:
Instant digital download, eliminating shipping costs and wait times.
Information Density:
Highly detailed, covering all diagnostic and repair procedures with sub-steps, notes, cautions, and warnings.
📋 Manual Details
Coverage Areas
Manual Type:
Full Service Repair Manual
Language:
English
Format:
PDF
File Availability:
Instant Download
Print Quality:
Full Printable
Compatibility:
All Versions of Windows & Mac
Software Requirements:
Adobe PDF Reader, WinRAR
📖 Manual Coverage
Systems Covered
Engine Mechanical:
Complete disassembly, inspection, repair, and reassembly of engine components including cylinder head, piston, crankshaft, connecting rods, valvetrain, timing components.
Wheel bearings, spokes, tire pressure, and recommended tire sizes.
Electrical System:
Battery, charging system (alternator, regulator/rectifier), starter motor, lighting (headlight, taillight, turn signals), horn, wiring harness, fuses, and switches.
Chassis And Frame:
Frame inspection, headstock bearings, and associated components.
Bodywork And Fairings:
Panel removal, installation, and repair.
Instrumentation:
Speedometer, tachometer, warning lights, and sensor connections.
Procedures Included
Routine Maintenance:
Oil changes, filter replacement, chain adjustment, tire pressure checks, spark plug replacement, air filter cleaning/replacement, brake pad inspection.
Troubleshooting:
Systematic diagnostic procedures for common and uncommon issues across all major systems, including electrical faults.
Engine Repair:
Full engine rebuilds, top-end overhauls, bottom-end repairs, and component replacements.
Transmission Repair:
Clutch replacement, gear inspection and replacement, shift drum and fork service.
Suspension Service:
Fork seal replacement, shock absorber service, linkage bearing maintenance.
Brake Service:
Brake caliper overhaul, master cylinder rebuild, brake bleeding, pad and rotor replacement.
Electrical Diagnostics:
Wiring diagram interpretation, circuit testing, component testing for charging, ignition, and lighting systems.
Carburetor Tuning:
Cleaning, adjustment, and synchronization of the carburetor for optimal performance.
Technical Depth
Depth Level:
Comprehensive: Covers everything from basic user maintenance to full professional-level engine and transmission rebuilds, including advanced electrical diagnostics.
Illustrations:
Detailed illustrations, drawings, and photos guiding each procedure.
Clarity Of Instructions:
Numbered step-by-step instructions with detailed sub-steps, notes, cautions, and warnings.
Wiring Diagrams:
Combined with troubleshooting and electrical service procedures for ease of use.
Diagnostic Procedures:
All diagnostic and repair procedures covered in great detail.
📊 Manual Specifications
File Format
Primary Format:
PDF
Searchability:
Likely text-searchable if properly generated, allowing for quick information retrieval.
Print Quality
Print Capability:
Full Printable: Allows users to print specific sections or the entire manual.
Binding Type
Binding Format:
N/A (Digital Download)
Paper Type
Paper Format:
N/A (Digital Download)
⚙️ Engine Specifications
Primary Engine
Engine Type:
Single-cylinder, four-stroke
Displacement:
654 cc (approx.)
Bore X Stroke:
92.0 mm x 96.0 mm (approx., based on Rotax 654F)
Compression Ratio:
10.0:1 (typical for Rotax 654F)
Cooling System:
Liquid-cooled
Performance
Horsepower Peak:
Approximately 48-50 HP (at the crankshaft, depending on tuning)
Torque Peak:
Approximately 58-60 Nm (at the crankshaft, depending on tuning)
Regulator/rectifier failure, stator coil degradation, wiring harness chafing in specific areas.
📚 Vehicle History
Brand Heritage
Manufacturer:
Aprilia is an Italian manufacturer known for its sport motorcycles and scooters, with a strong heritage in racing.
Model Evolution
Pegaso Lineage:
The Pegaso line was Aprilia's foray into the adventure/dual-sport segment, often utilizing reliable Rotax engines. The 655 model represents a significant iteration of this popular platform.
Production
Production Era:
The Pegaso 655 was produced through the 1990s and into the early 2000s, with various updates and engine configurations.
Wenn du dich für eine Auswahl entscheidest, wird die Seite komplett aktualisiert.