Bmw 3 Series E30 318i 325 325e 325es 325i 325is 325i Convert
Normaler Preis
$133.00
Verkaufspreis
$133.00
Normaler Preis
Grundpreis
/ pro
Verkauf
Ausverkauft
🏷️ Basic Information Identification Make: BMW Model: 3 Series (E30) Sub Models Covered: 318i, 325, 325e, 325es, 325i, 325is, 325i Convertible Generation Generation Code: E30 Codes Chassis Code: E30 👋 Introduction Market Position Market Segment: Compact executive sports sedan/coupe/convertible Era Designation: Iconic '80s/'90s performance car, renowned for driving dynamics and build quality. Competitive Analysis Key Competitors: Mercedes-Benz 190E, Audi 80/90, Alfa Romeo 75, Ford Sierra XR4i, Opel Monza Key Features Driving Dynamics: Legendary handling, rear-wheel drive, balanced chassis, responsive steering Build Quality: Typical BMW robust construction, high-quality materials Design: Timeless Giugiaro-influenced styling, clean lines, driver-focused interior 📋 Manual Details Coverage Areas Manual Coverage Scope: Comprehensive service and repair for all listed E30 models Page Count Estimated Page Count: 1500+ Manual Type Manual Type: Service and Repair Manual Language Language: English Format Format: Digital Download (PDF) 📖 Manual Coverage Systems Covered Engine Systems: Engine mechanicals (M10, M20 variants), fuel injection (L-Jetronic, Motronic), ignition, cooling, exhaust, lubrication, emissions control Transmission Systems: Manual and automatic transmissions (Getrag 260, ZF 4HP22), clutch, driveline, differentials Suspension Steering: Front MacPherson struts, rear semi-trailing arms, springs, dampers, bushings, steering rack, power steering system Brake Systems: Front vented discs, rear discs, ABS (optional), brake hydraulics, parking brake Electrical Systems: Wiring diagrams, battery, charging system (alternator), starting system, lighting, instruments, sensors, ECUs (DME/Motronic), comfort electronics Bodywork Chassis: Body panel removal and installation, chassis structure, rust repair, door mechanisms, glass, trim, convertible top mechanisms HVAC Climate Control: Heating, ventilation, air conditioning (if equipped), refrigerant system Procedures Included Routine Maintenance: Oil changes, filter replacements, fluid checks and top-offs, spark plug replacement, belt tensioning, tire rotation Engine Repair: Head gasket replacement, valve adjustments, piston ring replacement, bearing replacement, timing belt/chain service (for M20) Transmission Repair: Clutch replacement, transmission rebuilds (manual and automatic), torque converter service Suspension Steering Repair: Shock absorber and strut replacement, bushing replacement, steering rack rebuild, power steering pump service Brake Service: Brake pad and rotor replacement, brake caliper service, hydraulic line replacement, ABS bleeding Electrical Diagnostics: Troubleshooting electrical faults, component testing, wiring harness repair, ECU diagnosis Bodywork Restoration: Panel alignment, dent repair, rust treatment and panel replacement, convertible top servicing Troubleshooting Guides: Step-by-step diagnostics for common and uncommon issues, symptom-based problem solving Technical Depth Depth Of Coverage: Highly detailed, suitable for professional mechanics and advanced DIY enthusiasts. Covers everything from basic fluid changes to complete engine and transmission rebuilds. Diagnostic Procedures: Includes specific diagnostic trouble codes (DTCs) for applicable ECUs, oscilloscope readings, and component testing specifications. Torque Specifications: Comprehensive list of torque values for all critical fasteners, essential for proper assembly and safety. Wiring Diagrams: Detailed, high-resolution wiring diagrams for all electrical systems, color-coded and clearly labeled. Special Tools: Lists and descriptions of required special tools and equipment for specific repair procedures. 📊 Manual Specifications File Format File Type: PDF Searchability: Text-searchable PDF for quick information retrieval Print Quality Image Resolution: High-resolution images, diagrams, and schematics suitable for printing Page Layout: Designed for clear readability on screen and on printed pages Binding Type Binding Type: N/A (Digital Download) Paper Type Paper Type: N/A (Digital Download) ⚙️ Engine Specifications Primary Engine Engine Codes: M10 (4-cylinder), M20 (6-cylinder) 318I Engine Specs: 1.8L M10 Inline-4, Bosch L-Jetronic fuel injection, ~104 hp 325E Engine Specs: 2.7L M20B27 'Eta' Inline-6, Bosch Motronic, focus on torque and economy, ~121-125 hp 325I 325Is Engine Specs: 2.5L M20B25 Inline-6, Bosch Motronic, ~168-171 hp Performance Horsepower Range: 104 hp (318i) to 171 hp (325i/is) Torque Range: 140 Nm (318i) to 225 Nm (325i/is) Fuel System Injection Systems: Bosch L-Jetronic (318i), Bosch Motronic ML4.1/ML4.3/ML6.1 (325e/i/is) Fuel Type: Unleaded Gasoline (Premium recommended) Fuel Pump Type: Electric, in-tank 🔧 Transmission Standard 318I Transmission Standard: 4-speed Manual 325E Transmission Standard: 5-speed Manual (Getrag 260) 325I 325Is Transmission Standard: 5-speed Manual (Getrag 260) Optional 318I Transmission Optional: 3-speed Automatic 325E Transmission Optional: 4-speed Automatic (ZF 4HP22) 325I 325Is Transmission Optional: 4-speed Automatic (ZF 4HP22) Features Clutch Type: Single dry plate (manual) Differential Type: Open differential standard; Limited Slip Differential (LSD) optional on 325i/is Transmission Fluid Spec: MTF-LT-2 (Manual), ATF Dexron II/III (Automatic) - consult manual for specific part numbers and exact specs 📐 Dimensions Exterior Wheelbase: 2570 mm (101.2 in) Length: 4325 mm (170.3 in) Width: 1640 mm (64.6 in) Height: 1370 mm (53.9 in) - 1380 mm (54.3 in) depending on model Wheel Bolt Pattern: 5x120mm Wheel Size: 14-inch or 15-inch standard, 16-inch optional/sport models Weights Curb Weight Range: Approx. 1200 kg - 1350 kg (2645 lbs - 2976 lbs) 🛡️ Safety Features Ratings Crash Test History: While NHTSA/Euro NCAP ratings for this specific era are not as standardized as today, the E30 was considered a safe vehicle for its time with a robust unibody structure. Active Features ABS: Optional on most models, standard on some later 'i' models. Traction Control: Not typically available on E30 models Passive Features Airbags: Driver airbag...
Panel alignment, dent repair, rust treatment and panel replacement, convertible top servicing
Troubleshooting Guides:
Step-by-step diagnostics for common and uncommon issues, symptom-based problem solving
Technical Depth
Depth Of Coverage:
Highly detailed, suitable for professional mechanics and advanced DIY enthusiasts. Covers everything from basic fluid changes to complete engine and transmission rebuilds.
Diagnostic Procedures:
Includes specific diagnostic trouble codes (DTCs) for applicable ECUs, oscilloscope readings, and component testing specifications.
Torque Specifications:
Comprehensive list of torque values for all critical fasteners, essential for proper assembly and safety.
Wiring Diagrams:
Detailed, high-resolution wiring diagrams for all electrical systems, color-coded and clearly labeled.
Special Tools:
Lists and descriptions of required special tools and equipment for specific repair procedures.
📊 Manual Specifications
File Format
File Type:
PDF
Searchability:
Text-searchable PDF for quick information retrieval
Print Quality
Image Resolution:
High-resolution images, diagrams, and schematics suitable for printing
Page Layout:
Designed for clear readability on screen and on printed pages
Binding Type
Binding Type:
N/A (Digital Download)
Paper Type
Paper Type:
N/A (Digital Download)
⚙️ Engine Specifications
Primary Engine
Engine Codes:
M10 (4-cylinder), M20 (6-cylinder)
318I Engine Specs:
1.8L M10 Inline-4, Bosch L-Jetronic fuel injection, ~104 hp
325E Engine Specs:
2.7L M20B27 'Eta' Inline-6, Bosch Motronic, focus on torque and economy, ~121-125 hp
Open differential standard; Limited Slip Differential (LSD) optional on 325i/is
Transmission Fluid Spec:
MTF-LT-2 (Manual), ATF Dexron II/III (Automatic) - consult manual for specific part numbers and exact specs
📐 Dimensions
Exterior
Wheelbase:
2570 mm (101.2 in)
Length:
4325 mm (170.3 in)
Width:
1640 mm (64.6 in)
Height:
1370 mm (53.9 in) - 1380 mm (54.3 in) depending on model
Wheel Bolt Pattern:
5x120mm
Wheel Size:
14-inch or 15-inch standard, 16-inch optional/sport models
Weights
Curb Weight Range:
Approx. 1200 kg - 1350 kg (2645 lbs - 2976 lbs)
🛡️ Safety Features
Ratings
Crash Test History:
While NHTSA/Euro NCAP ratings for this specific era are not as standardized as today, the E30 was considered a safe vehicle for its time with a robust unibody structure.
Active Features
ABS:
Optional on most models, standard on some later 'i' models.
Traction Control:
Not typically available on E30 models
Passive Features
Airbags:
Driver airbag became optional/standard later in the production run; Passenger airbag not available.
Seatbelts:
Three-point front seatbelts, lap belts for rear passengers
Rollover Protection:
Reinforced A-pillars and windshield frame; roll bar sometimes featured on M3 and aftermarket conversions.
💡 Technology Features
Infotainment
Radio System:
Factory Blaupunkt or Bavaria radios, often with cassette tape players. Aftermarket head unit upgrades are common.
Not available from factory; requires aftermarket installations.
🔧 Maintenance
Service Intervals
Oil Change Interval:
Typically every 7,500 to 10,000 miles (12,000 to 16,000 km) or annually, depending on driving conditions. Consult manual for specific intervals.
Spark Plug Replacement:
Approximately 20,000 - 30,000 miles (32,000 - 48,000 km) depending on plug type (standard vs. platinum).
Timing Belt Replacement:
M20 engines: No timing belt, uses a timing chain (designed for longevity, but inspection is recommended). M10 engines have a timing chain. Refer to manual for inspection intervals.
Fluid Specifications
Engine Oil Type:
SAE 15W-40 or 10W-40 API SG/SH (check manual for exact viscosity and API rating based on climate)
Coolant Type:
Ethylene glycol based antifreeze, typically a 50/50 mix with distilled water. BMW Blue Coolant or equivalent.
Brake Fluid Type:
DOT 3 or DOT 4
Power Steering Fluid:
ATF Dexron II/III or Pentosin CHF 11S (check specific model and year)
M20: timing belt tensioner failure (on earlier models without updated tensioner), head gasket leaks, oil pan gasket leaks. M10: Oil leaks from front crank seal.
Rust (wheel wells, rocker panels, battery tray, around windows), sagging headliner, convertible top hydraulics/seals.
📚 Vehicle History
Brand Heritage
Bmw Legacy:
BMW's reputation for 'The Ultimate Driving Machine' was solidified with the E30 generation.
Model Evolution
E30 Introduction:
Introduced in 1982, replacing the E21 3 Series. The E30 was a significant step forward in design, engineering, and performance.
Body Styles:
Available as 2-door sedan, 4-door sedan, convertible, and the iconic M3 (not covered by this manual).
Production
Production Years:
1982-1994 (globally, with North American market focus 1984-1991)
Manufacturing Locations:
Germany (primarily), South Africa, Thailand, Mexico
🏆 Awards & Recognition
Recognitions
Automotive Press:
Consistently praised by automotive journalists for its handling, performance, and driver engagement. Named to Car and Driver's Ten Best list multiple times.
Collector Status:
Highly sought-after by enthusiasts and collectors, particularly well-maintained examples of the 325i and 325is models.
Certifications
Manual Quality:
This service manual is likely compiled from official BMW technical data or reputable third-party sources, offering a high level of accuracy and comprehensiveness for repair work.
Wenn du dich für eine Auswahl entscheidest, wird die Seite komplett aktualisiert.