IH International Cub Cadet Tractor 71 102 122 123 Workshop
Precio habitual
$133.00
Precio de venta
$133.00
Precio habitual
Precio unitario
/ por
En oferta
Agotado
🏷️ Basic Information Identification Make: International Harvester (IH) Model: Cub Cadet Model Variant: 71, 102, 122, 123 Series Codes Manual Type Code: FSM-IH-CC-71-102-122-123 👋 Introduction Market Position Historical Segment: Compact Utility Tractors (Hobby Farm, Landscaping, Garden) Competitive Analysis Key Competitors: John Deere (Lawn/Garden Tractors), Simplicity, Wheel Horse Key Features Brand Reputation: Known for robust construction and reliable performance in their class Manual Value Proposition: Enables owners and technicians to perform comprehensive maintenance and repairs, extending the life and usability of the tractor. 📋 Manual Details Coverage Areas Primary Coverage: International IH Cub Cadet Tractor 71, 102, 122, 123 Series Secondary Coverage: All mechanical and electrical systems Page Count Estimated Page Count: Hundreds of pages (typical for original factory manuals) Manual Type Manual Category: Workshop Service Manual / Repair Manual Manual Origin: Factory Original / Manufacturer Written Language Language: English Format File Format: PDF Delivery Method: Instant Download 📖 Manual Coverage Systems Covered Engine: Complete overhaul, tuning, troubleshooting, specifications Fuel System: Carburetor (Zenith, Marvel-Schebler), fuel pump, fuel lines, tank maintenance Cooling System: Air cooling system analysis, fan, shrouding, cylinder head cooling fins Ignition System: Magneto (e.g., Wico, Fairbanks-Morse), ignition timing, spark plugs, troubleshooting Transmission: Gearbox overhaul, clutch, shifting mechanisms, lubrication Drive Train: Differential, rear axle, driveshaft maintenance and repair Electrical System: Wiring diagrams, battery, starter, lighting, troubleshooting electrical faults Hydraulic System: Hydraulic lift system (if equipped), pump, cylinder, control valve repair and maintenance Steering System: Steering gearbox, linkage, adjustments, and repair Brake System: Brake shoe adjustment, linkage, drum brake repair Chassis And Frame: Frame inspection, front axle repair, wheel bearing maintenance Bodywork And Sheetmetal: Fender mounting, hood removal, general body maintenance Power Take Off Pto: PTO shaft inspection, maintenance, and engagement system Procedures Included Routine Maintenance: Oil changes, filter replacements, lubrication points, periodic checks Troubleshooting: Diagnostic charts, symptom-based problem solving Repair Instructions: Step-by-step guides for component removal, repair, and reassembly Overhaul Procedures: Complete engine, transmission, and hydraulic system rebuilds Adjustment Procedures: Carburetor, ignition timing, clutch, brake adjustments Wiring Diagrams: Complete electrical schematics for all systems Diagnostics: Detailed fault finding and diagnostic procedures Technical Depth Depth Of Coverage: Comprehensive (from basic maintenance to full engine/transmission rebuilds) Target Audience: Professional Technicians and Advanced DIY Mechanics 📊 Manual Specifications File Format File Type: PDF Portability: Printable Usability: Zoom In/Out enabled Software Requirements: Adobe PDF Reader, WinRAR Compatibility: All Versions of Windows & Mac Binding Type Digital Binding: N/A (Digital Download) Paper Type Digital Paper Type: N/A (Digital PDF) ⚙️ Engine Specifications Primary Engine Engine Type: Air-Cooled, 4-Cycle, Gasoline Engine Configuration: Horizontal Shaft, Single Cylinder (common for early models) Displacement Cc: Varies by model (e.g., approximately 320cc to 400cc for many 7hp-12hp variants) Horsepower Rating: Typically ranges from 7 HP to 12 HP (depending on specific model, e.g., 71 = 7HP, 102 = 10HP, 122/123 = 12HP) Performance Governor Type: Mechanical Flyweight Governor Fuel System Carburetor Brands: Zenith, Marvel-Schebler Fuel Type: Unleaded Gasoline 🔧 Transmission Standard Transmission Type: Manual Gearbox with Hi-Lo Range Number Of Speeds: 3 Forward + 1 Reverse (in each range), totaling 6 Forward + 2 Reverse Optional Hydrostatic Transmission: Not standard for these specific early series models; manual transmission is characteristic. Features Clutch Type: Dry Plate Clutch Drive Type: Rear Wheel Drive (RWD) 📐 Dimensions Weights Base Weight Approx: Varies by model, typically 450-600 lbs (without attachments) Wheelbase Approx: Approximately 44-46 inches 🛡️ Safety Features Ratings Safety Standards: Manufacturer's safety guidelines for tractor operation of the era Active Features Throttle Governor: Maintains consistent engine RPM for PTO and implement operation Passive Features Operator Station: Basic operator platform with controls, footrests, and seating (seat belt often an aftermarket addition or optional) 💡 Technology Features Infotainment Infotainment System: N/A (This era of tractor does not feature modern infotainment systems). Driver Assistance Driver Assistance Features: N/A (Basic mechanical controls only). Connectivity Connectivity Options: N/A 🔧 Maintenance Service Intervals Engine Oil Change: Typically every 25-50 operating hours, or annually. Gearbox Oil Change: Check annually, change as recommended (e.g., every 100-200 hours or every few years). Air Filter Cleaning: Inspect and clean frequently, depending on operating conditions. Grease Points: Lubricate all grease fittings (wheel bearings, steering, linkages) every 25-50 hours or after washing. Fluid Specifications Engine Oil Type: SAE 30W HD (Heavy Duty) or 10W-30 (check specific engine manual recommendation for temperature range). Gearbox Oil Type: SAE 80W-90 Gear Oil or equivalent GL-4 specification. Hydraulic Fluid Type: IH Hytran or equivalent tractor hydraulic fluid (if equipped with hydraulic lift). Known Issues Carburetor Wear: Zenith/Marvel-Schebler carburetors can wear over time, leading to rich running or difficulty in adjustment. Governor Linkage: Governor control linkage can become stiff or worn, affecting engine speed regulation. Clutch Wear: Clutch disc and pressure plate can wear with heavy use, requiring adjustment or replacement. Electrical Connections: Corrosion or loose connections in the wiring harness can cause intermittent electrical faults. Air Cooling Efficiency: Accumulation...
Comprehensive (from basic maintenance to full engine/transmission rebuilds)
Target Audience:
Professional Technicians and Advanced DIY Mechanics
📊 Manual Specifications
File Format
File Type:
PDF
Portability:
Printable
Usability:
Zoom In/Out enabled
Software Requirements:
Adobe PDF Reader, WinRAR
Compatibility:
All Versions of Windows & Mac
Binding Type
Digital Binding:
N/A (Digital Download)
Paper Type
Digital Paper Type:
N/A (Digital PDF)
⚙️ Engine Specifications
Primary Engine
Engine Type:
Air-Cooled, 4-Cycle, Gasoline
Engine Configuration:
Horizontal Shaft, Single Cylinder (common for early models)
Displacement Cc:
Varies by model (e.g., approximately 320cc to 400cc for many 7hp-12hp variants)
Horsepower Rating:
Typically ranges from 7 HP to 12 HP (depending on specific model, e.g., 71 = 7HP, 102 = 10HP, 122/123 = 12HP)
Performance
Governor Type:
Mechanical Flyweight Governor
Fuel System
Carburetor Brands:
Zenith, Marvel-Schebler
Fuel Type:
Unleaded Gasoline
🔧 Transmission
Standard
Transmission Type:
Manual Gearbox with Hi-Lo Range
Number Of Speeds:
3 Forward + 1 Reverse (in each range), totaling 6 Forward + 2 Reverse
Optional
Hydrostatic Transmission:
Not standard for these specific early series models; manual transmission is characteristic.
Features
Clutch Type:
Dry Plate Clutch
Drive Type:
Rear Wheel Drive (RWD)
📐 Dimensions
Weights
Base Weight Approx:
Varies by model, typically 450-600 lbs (without attachments)
Wheelbase Approx:
Approximately 44-46 inches
🛡️ Safety Features
Ratings
Safety Standards:
Manufacturer's safety guidelines for tractor operation of the era
Active Features
Throttle Governor:
Maintains consistent engine RPM for PTO and implement operation
Passive Features
Operator Station:
Basic operator platform with controls, footrests, and seating (seat belt often an aftermarket addition or optional)
💡 Technology Features
Infotainment
Infotainment System:
N/A (This era of tractor does not feature modern infotainment systems).
Driver Assistance
Driver Assistance Features:
N/A (Basic mechanical controls only).
Connectivity
Connectivity Options:
N/A
🔧 Maintenance
Service Intervals
Engine Oil Change:
Typically every 25-50 operating hours, or annually.
Gearbox Oil Change:
Check annually, change as recommended (e.g., every 100-200 hours or every few years).
Air Filter Cleaning:
Inspect and clean frequently, depending on operating conditions.
Grease Points:
Lubricate all grease fittings (wheel bearings, steering, linkages) every 25-50 hours or after washing.
Fluid Specifications
Engine Oil Type:
SAE 30W HD (Heavy Duty) or 10W-30 (check specific engine manual recommendation for temperature range).
Gearbox Oil Type:
SAE 80W-90 Gear Oil or equivalent GL-4 specification.
Hydraulic Fluid Type:
IH Hytran or equivalent tractor hydraulic fluid (if equipped with hydraulic lift).
Known Issues
Carburetor Wear:
Zenith/Marvel-Schebler carburetors can wear over time, leading to rich running or difficulty in adjustment.
Governor Linkage:
Governor control linkage can become stiff or worn, affecting engine speed regulation.
Clutch Wear:
Clutch disc and pressure plate can wear with heavy use, requiring adjustment or replacement.
Electrical Connections:
Corrosion or loose connections in the wiring harness can cause intermittent electrical faults.
Air Cooling Efficiency:
Accumulation of debris on cooling fins can reduce engine cooling efficiency, leading to overheating.
📚 Vehicle History
Brand Heritage
Manufacturer:
International Harvester (IH) – a major American manufacturer of agricultural and construction equipment.
Model Evolution
Cub Cadet Lineage:
The Cub Cadet line was introduced by IH in 1961 as their premium lawn and garden tractor, known for its automotive-style engineering.
Production
Production Period:
The specific models 71, 102, 122, and 123 were produced in the mid-to-late 1960s (e.g., 122/123 series circa 1963-1965).
Manufacturing Location:
Likely Louisville, Kentucky, USA (IH's primary tractor plant)
🏆 Awards & Recognition
Recognitions
Industry Acclaim:
Cub Cadet tractors of this era were generally well-regarded for their robust build quality and capability in the homeowner and small-acreage market, setting a benchmark for quality in their class.
Al seleccionar una opción, se actualiza toda la página.