Original Illustrated Factory Operating Instructions (User Manual) for Linde Pallet Stacker Type 372-01.

Original factory manuals for Linde Forklift Trucks, contains high quality images, circuit diagrams and instructions to help you to operate and repair your truck

Covered models:
L14 SN from M03000
L14AP SN from M03000
L16 SN from M03000
L16AP SN from M03000

Format: PDF, 78 Pages
Language: English

Contents:

Description
Plates and labels
Technical characteristics
Technical description
General view L 14 - L 16
General view L14 AP - L16 AP .
Controls L14AP-L16AP (LLC).
Indicators
Combined hour meter/.
discharge limiter indicator.
Operation / Daily checks and maintenan prior to operation
Safety rules .
Definition of terms related to safety .
Use of lubricants
Advice for initial use
Checks before initial operation
Daily checks before use
Check the Forward/Reverse and raise/lower controls .
Check the safety braking
Check automatic braking
Check parking brake
Check emergency stop button.
Check operation of safety reverser
Check operation of horn
Check condition of battery charging.
Opening the battery cover with vertical outlet.
Opening the battery cover with side outlet.
Connecting/disconnecting the battery.
Charging the battery with the integrated charger .
Faults during charging.
Remove the mains power supply cord.
Electric characteristics of the charger.
Special case of gelled batteries
Recharging the battery with an external charger.
Check the state of the cables, terminals and battery contact.
Checking level of electrolyte and water supplement .
Checking the electrolyte gravity
Removing/replacing the battery
Battery with vertical outlet: Battery charging.
Battery with side outlet: removal of battery.
Choosing the opening side of the battery compartment
Steering L14 - L16 without platform
Instructions for use
Marking the travel direction
Startup
Driving
Forward travel
Reverse travel
Direction of travel reversal
Steering
Safety reverser
Emergency stop button
Operating the truck on ramps
Ascending slopes
Descending slopes
Starting on a slope
Steering L14AP- L16AP with platform
Instructions for use
Marking the travel direction
Startup
Walkie type steering
Standing steering
Forward travel
Reverse travel
Direction of travel reversal
Steering
Safety when turning: speed limitation
Emergency stop button
Operating the truck on ramps
Ascending slopes
Descending slopes
Starting on a slope
Use
Electromagnetic braking
Braking by reversing the direction of motion
Parking brake
L.B.C. (Linde Brake Control) automatic braking
Horn control
LLC proportional control
Use of the mast
Option: high lifting speed
Lifting jack control
Initial lifting controls
Gradual stopping of platform in low position
Speed limit with fork raised
Speed limit according to load weight: L14AP-L16 AP
Handling loads
Capacity L14-L16 without initial lifting
Capacity L14-L16 with initial lifting
Reading the load diagram L14 - L16
Reading the load diagram L14AP- L16AP
Picking up a load on the ground (L14-L16 with initial lifting)
Picking up a load on the ground (L14-L16 with initial lifting)
Transporting a load
Putting down the load on the ground
Stacking a load
Picking up a load at a height
Before leaving the truck
L14AP- L16AP (with platform): Handling loads
Picking up a load on the ground (L14AP-L16AP without initial lift)
Picking up a load on the ground (L14AP-L16AP with initial lift)
Transporting a load
Putting down the load on the ground
Stacking a load
Picking up a load at a height
Before leaving the truck
Slinging, towing and removing the mast
Slinging the truck
Raising the order picker
Towing
Removing the mast
Transporting and storing the truck
Maintenance
General remarks
Working on the lifting mast
Standard lifting mast
Safety device for the standard lifting mast
Duplex lifting mast
Safety device for the Duplex lifting mast
Triplex lifting mast
Safety device for the Triplex lifting mast
Checks and maintenance work after the first 50 hours of service
Scheduled maintenance and inspection
Maintenance as required
Cleaning the truck
Opening the front cover (L14 - L16 without platform)
Cover plate of lifting jack flexible cover (L14 - L16 without platform)
Opening the front cover (L14 - L16 with platform)
Adjustment of the height of the stabiliser wheel
Fuses
Cleaning the battery and battery compartment
Battery in open case
Battery in sealed case
Maintenance every 500 hours
Checking the condition and fixing of the mast and chains
Adjustment of the length of mast chains
Cleaning and lubricating chains
Lubricating the mast
Checking the fixing of mast protections
Checking guide shoes of the initial lift
Checking articulations
Checking the tightness of wheels
Checking the state of the wheels
Greasing the turntable bearing of the motor unit
Cleaning the steering ring gear pinion
Condition of spring of battery cover lock handle with side outlet
Checking the lateral stop fixings of the battery compartment
Checking the electrolyte level
Checking the electrolyte gravity
Checking the state of the cables, terminals and battery contact
Cleaning the electrical plate and checking the electrical connections
Cleaning and checking contact wear
Checking and if necessary replacing the traction motor brushes
Checking and if necessary replacing the steering motor brushes
Adjustment of electromagnetic brake
Checking that hydraulic circuits are leak proof
Checking hydraulic oil level
Checking oil level of gear reducer
Maintenance every 1000 hours
Checking and if necessary replacing the motor pump brushes
Changing the filter unit
Checking the mechanical fixing of components
Maintenance every 2000 hours
Replacing the hydraulic oil
Replacing the gear reducer oil
Recommended lubricants/ Technical data
Hydraulic diagrams
Electrical diagrams
Index .