Ostoskorisi
😊 Product added to cart successfully   Product removed to cart successfully
Your shopping cart is empty!
Jatka ostoksia
1 of 2

CASE 1070 Tractor BEFORE SN 8675001 Parts Manual B1118

Normaalihinta
$133.00
Myyntihinta
$133.00
Normaalihinta
🏷️ Basic Information Identification Make: Case IH Model: 1070 Tractor Serial Number Prefix: BEFORE SN 8675001 Codes Manual Product Code: B1118 👋 Introduction Market Position Market Segment: Heavy-duty agricultural tractor Competitive Analysis Key Competitors: John Deere 4020/4230/4430, International Harvester 966/1066, Ford 7000/7600 series, Massey Ferguson 165/185/1100 series Key Features Tractor Design Philosophy: Robust construction, powerful engine, reliable drivetrain, versatile hydraulics for demanding farm operations Value Proposition Manual Value: Essential for identifying and sourcing correct original equipment parts for maintenance, repair, and restoration 📋 Manual Details Coverage Areas Systems Covered: Engine, Fuel System, Cooling System, Lubrication System, Electrical System, Power Train, Transmission, Drive Train, Hydraulics, Steering, Brakes, Chassis, Cab, Operator Station, Sheet Metal, Special Equipment Page Count Page Count: Estimated 800-1200 pages (typical for this era of tractor parts manual) Manual Type Manual Type: Parts Manual Language Language: English Format Format: Digital Scan (High Resolution) 📖 Manual Coverage Systems Covered Engine Components: Cylinder block, cylinder head, pistons, connecting rods, crankshaft, camshaft, valves, timing gears, oil pump, fuel injection system, manifolds, filters Fuel System Components: Fuel tank, fuel lines, fuel filters, injection pump, injectors, governor Cooling System Components: Radiator, fan, water pump, thermostat, coolant hoses, coolant filters Lubrication System Components: Oil pan, oil pump, oil filters, oil cooler, lubrication passages Electrical System Components: Battery, starter, alternator, wiring harnesses, ignition system, lighting, gauges, switches, solenoid Transmission Components: Gearbox, clutches, shafts, gears, synchronizers, hydraulic controls, PTO (Power Take-Off) components Drive Train Components: Clutch, flywheel, drive shaft, differential, final drives, axles, PTO shaft Hydraulic System Components: Hydraulic pump, hydraulic pump drive, control valves, cylinders, hoses, fittings, hydraulic reservoir, filters, linkage components Steering System Components: Steering wheel, steering column, steering gear, hydraulic assist components, tie rods, linkage Brake System Components: Brake pedals, brake master cylinder, brake lines, brake calipers/drums, brake discs/pads, parking brake mechanism Chassis And Frame Components: Frame rails, front axle support, rear axle housing, drawbar, hitch components, mounting brackets Cab And Operator Station Components: Seat, steering console, control levers, pedals, dashboard, interior trim, glass, doors, windows, ROPS (Roll Over Protective Structure) components Sheet Metal And Body Components: Hood, fenders, side panels, grille, fenders, battery box covers Special Equipment Components: Front weights, wheel weights, specific PTO options, auxiliary hydraulic outlets, specialized attachments (if applicable and documented) Procedures Included Assembly Disassembly Illustrations: Detailed exploded views of all components and sub-assemblies Part Number Identification: Unique part numbers for every component, sub-assembly, and fastener Interchangeability Information: Cross-reference for superseded or alternative parts (may be limited in older manuals) Component Identification: Visual identification of parts through detailed diagrams Technical Depth Technical Depth: Component-level identification and sourcing for repair and overhaul 📊 Manual Specifications File Format File Format: PDF Print Quality Print Quality: High Resolution Scan, All pages printable Binding Type Binding Type: N/A (Digital Product) Paper Type Paper Type: N/A (Digital Product) Software Recommendation Software Recommendation: Adobe Viewer 9.1 or newer ⚙️ Engine Specifications Primary Engine Engine Manufacturer: Case IH (likely sourced from a major engine builder) Engine Model Family: Likely a 5.9L or 6.2L 6-cylinder diesel engine Engine Type: Naturally Aspirated or Turbocharged Diesel Performance Horsepower Range: Approximately 90-110 PTO horsepower (estimated) Torque Specifications: Detailed torque specifications for critical engine components will be within the referenced service manual, but not explicitly in a parts manual. This parts manual will list the fasteners. Fuel System Fuel Injection Type: Direct Injection, likely with a Bosch or similar inline injection pump Fluid Specifications Engine Oil Type: Refer to owner's or service manual for exact API/ACEA specifications. Typically CJ-4 or CD/CE rated diesel engine oil. Coolant Type: Ethylene glycol-based coolant with corrosion inhibitors. Refer to service manual for specific formulation. Engine Components Cylinder Bore Size: Specific measurements would be in the service manual, but this parts manual lists replacement pistons and rings for a specific bore size. Piston Ring Specifications: Identified by part numbers in the manual for specific engine configurations. 🔧 Transmission Standard Transmission Type: 12-speed PowerShift (e.g., Case IH powershift transmission) Optional Optional Transmission: Likely a standard 8-speed or 12-speed gearbox was also available, depending on the exact model variant. Features Powershift Capabilities: On-the-go shifting through gears without using the clutch pedal for certain ranges. Fluid Specifications Transmission Hydraulic Fluid: Refer to owner's or service manual. Typically a UTF (Universal Tractor Transmission Fluid) or specific Case IH Hy-Tran fluid. 📐 Dimensions Exterior Wheelbase: Varies by configuration, but typically around 90-100 inches (2286-2540 mm). Overall Length: Varies by configuration, but typically around 150-170 inches (3810-4318 mm). Overall Width: Varies by configuration, typically around 70-80 inches (1778-2032 mm). Weights Operating Weight: Approximately 8,500 - 10,000 lbs (3855 - 4535 kg), depending on configuration. 🛡️ Safety Features Ratings Rops Certification: Designed to meet ROPS standards of the era. Specific certification details would be in the operator's manual. Active Features Brake System Type: Hydraulic wet disc brakes are common for this era of heavy...
21 people are viewing this right now
Type: Tractor
Myyjä:
Sku: 26608
Collections: ALL Tractors

AvailabilityIn stock

CASE 1070 Tractor BEFORE SN 8675001 Parts Manual B1118
🏷️ Basic Information
Identification
Make:
Case IH
Model:
1070 Tractor
Serial Number Prefix:
BEFORE SN 8675001
Codes
Manual Product Code:
B1118
👋 Introduction
Market Position
Market Segment:
Heavy-duty agricultural tractor
Competitive Analysis
Key Competitors:
John Deere 4020/4230/4430, International Harvester 966/1066, Ford 7000/7600 series, Massey Ferguson 165/185/1100 series
Key Features
Tractor Design Philosophy:
Robust construction, powerful engine, reliable drivetrain, versatile hydraulics for demanding farm operations
Value Proposition
Manual Value:
Essential for identifying and sourcing correct original equipment parts for maintenance, repair, and restoration
📋 Manual Details
Coverage Areas
Systems Covered:
Engine, Fuel System, Cooling System, Lubrication System, Electrical System, Power Train, Transmission, Drive Train, Hydraulics, Steering, Brakes, Chassis, Cab, Operator Station, Sheet Metal, Special Equipment
Page Count
Page Count:
Estimated 800-1200 pages (typical for this era of tractor parts manual)
Manual Type
Manual Type:
Parts Manual
Language
Language:
English
Format
Format:
Digital Scan (High Resolution)
📖 Manual Coverage
Systems Covered
Engine Components:
Cylinder block, cylinder head, pistons, connecting rods, crankshaft, camshaft, valves, timing gears, oil pump, fuel injection system, manifolds, filters
Fuel System Components:
Fuel tank, fuel lines, fuel filters, injection pump, injectors, governor
Cooling System Components:
Radiator, fan, water pump, thermostat, coolant hoses, coolant filters
Lubrication System Components:
Oil pan, oil pump, oil filters, oil cooler, lubrication passages
Electrical System Components:
Battery, starter, alternator, wiring harnesses, ignition system, lighting, gauges, switches, solenoid
Transmission Components:
Gearbox, clutches, shafts, gears, synchronizers, hydraulic controls, PTO (Power Take-Off) components
Drive Train Components:
Clutch, flywheel, drive shaft, differential, final drives, axles, PTO shaft
Hydraulic System Components:
Hydraulic pump, hydraulic pump drive, control valves, cylinders, hoses, fittings, hydraulic reservoir, filters, linkage components
Steering System Components:
Steering wheel, steering column, steering gear, hydraulic assist components, tie rods, linkage
Brake System Components:
Brake pedals, brake master cylinder, brake lines, brake calipers/drums, brake discs/pads, parking brake mechanism
Chassis And Frame Components:
Frame rails, front axle support, rear axle housing, drawbar, hitch components, mounting brackets
Cab And Operator Station Components:
Seat, steering console, control levers, pedals, dashboard, interior trim, glass, doors, windows, ROPS (Roll Over Protective Structure) components
Sheet Metal And Body Components:
Hood, fenders, side panels, grille, fenders, battery box covers
Special Equipment Components:
Front weights, wheel weights, specific PTO options, auxiliary hydraulic outlets, specialized attachments (if applicable and documented)
Procedures Included
Assembly Disassembly Illustrations:
Detailed exploded views of all components and sub-assemblies
Part Number Identification:
Unique part numbers for every component, sub-assembly, and fastener
Interchangeability Information:
Cross-reference for superseded or alternative parts (may be limited in older manuals)
Component Identification:
Visual identification of parts through detailed diagrams
Technical Depth
Technical Depth:
Component-level identification and sourcing for repair and overhaul
📊 Manual Specifications
File Format
File Format:
PDF
Print Quality
Print Quality:
High Resolution Scan, All pages printable
Binding Type
Binding Type:
N/A (Digital Product)
Paper Type
Paper Type:
N/A (Digital Product)
Software Recommendation
Software Recommendation:
Adobe Viewer 9.1 or newer
⚙️ Engine Specifications
Primary Engine
Engine Manufacturer:
Case IH (likely sourced from a major engine builder)
Engine Model Family:
Likely a 5.9L or 6.2L 6-cylinder diesel engine
Engine Type:
Naturally Aspirated or Turbocharged Diesel
Performance
Horsepower Range:
Approximately 90-110 PTO horsepower (estimated)
Torque Specifications:
Detailed torque specifications for critical engine components will be within the referenced service manual, but not explicitly in a parts manual. This parts manual will list the fasteners.
Fuel System
Fuel Injection Type:
Direct Injection, likely with a Bosch or similar inline injection pump
Fluid Specifications
Engine Oil Type:
Refer to owner's or service manual for exact API/ACEA specifications. Typically CJ-4 or CD/CE rated diesel engine oil.
Coolant Type:
Ethylene glycol-based coolant with corrosion inhibitors. Refer to service manual for specific formulation.
Engine Components
Cylinder Bore Size:
Specific measurements would be in the service manual, but this parts manual lists replacement pistons and rings for a specific bore size.
Piston Ring Specifications:
Identified by part numbers in the manual for specific engine configurations.
🔧 Transmission
Standard
Transmission Type:
12-speed PowerShift (e.g., Case IH powershift transmission)
Optional
Optional Transmission:
Likely a standard 8-speed or 12-speed gearbox was also available, depending on the exact model variant.
Features
Powershift Capabilities:
On-the-go shifting through gears without using the clutch pedal for certain ranges.
Fluid Specifications
Transmission Hydraulic Fluid:
Refer to owner's or service manual. Typically a UTF (Universal Tractor Transmission Fluid) or specific Case IH Hy-Tran fluid.
📐 Dimensions
Exterior
Wheelbase:
Varies by configuration, but typically around 90-100 inches (2286-2540 mm).
Overall Length:
Varies by configuration, but typically around 150-170 inches (3810-4318 mm).
Overall Width:
Varies by configuration, typically around 70-80 inches (1778-2032 mm).
Weights
Operating Weight:
Approximately 8,500 - 10,000 lbs (3855 - 4535 kg), depending on configuration.
🛡️ Safety Features
Ratings
Rops Certification:
Designed to meet ROPS standards of the era. Specific certification details would be in the operator's manual.
Active Features
Brake System Type:
Hydraulic wet disc brakes are common for this era of heavy tractors.
Passive Features
Seat Belt Availability:
Likely available as an option or standard on later models. The manual would detail seat mounting hardware.
Operator Station Design
Control Layout:
Ergonomic layout for controls, designed for operator comfort and efficiency during long workdays.
💡 Technology Features
Infotainment
Infotainment System:
Basic analog gauges and indicators (e.g., tachometer, temperature gauge, oil pressure gauge, fuel gauge). No modern infotainment systems.
Driver Assistance
Driver Assistance Features:
None. Relies on operator skill and mechanical systems.
Connectivity
Connectivity Features:
None. Mechanical linkages and basic electrical systems.
Pto Technology
Pto Speeds:
Standard 540/1000 RPM PTO, likely with a 2-speed or 4-speed PTO gearbox option.
🔧 Maintenance
Service Intervals
Engine Oil Change Interval:
Refer to owner's or service manual. Typically 100-250 hours.
Transmission Hydraulic Filter Change:
Refer to owner's or service manual. Typically every 500-1000 hours or annually.
Fuel Filter Replacement:
Refer to owner's or service manual. Typically every 250-500 hours or annually.
Fluid Specifications
Hydraulic System Capacity:
Refer to service manual. Typically 8-12 gallons (30-45 liters).
Transmission Fluid Capacity:
Refer to service manual. Varies significantly based on transmission type.
Known Issues
Common Wear Items:
Clutch packs (in Powershift transmissions), hydraulic pump wear, PTO clutch wear, wear on PTO splines, brake pad/disc wear, front axle kingpins.
Electrical System Reliability:
Older wiring harnesses can degrade over time, leading to intermittent electrical faults. This manual helps identify original wiring components.
Maintenance Tasks
Greasing Points:
Extensive greasing points on PTO shafts, steering linkages, drawbar pivot, hitch components, and wheel bearings. Manual will identify all original lubrication points and recommended greases.
Filter Part Numbers:
The manual will list original Case IH part numbers for all engine, hydraulic, and fuel filters.
📚 Vehicle History
Brand Heritage
Case Ih Legacy:
Case IH has a long history in agricultural machinery, known for durable and powerful tractors.
Model Evolution
1070 Introduction:
The Case 1070 was part of Case's lineup during the 1970s, representing their mid-range to large horsepower offerings. It succeeded earlier models and was a workhorse for general farm tasks.
Production
Production Years:
Mid to late 1970s (specific years would depend on the series variant).
Manufacturing Location:
Typically manufactured in the United States by Case IH.
🏆 Awards & Recognition
Recognitions
Industry Impact:
The Case 1070 was a popular and well-regarded tractor for its era, known for its power and durability in heavy agricultural applications.
Sale

Unavailable

Sold Out

img01