Daewoo Nubira 2000 2001 2002 Workshop Repair Service Manual
Prix habituel
$133.00
Prix soldé
$133.00
Prix habituel
Prix unitaire
/ par
Vente
Épuisé
🏷️ Basic Information Identification Make: Daewoo Model: Nubira Years Covered: 2000, 2001, 2002 Codes Chassis Code: J100 (primarily, though minor variations may exist across early production) Engine Code Variants: Likely ETEC II family, specific codes such as T18SED (1.8L) and potentially X20SED (2.0L) depending on market and trim. 👋 Introduction Market Position Segment: Compact to mid-size family car (competing with vehicles like Honda Civic, Toyota Corolla, Ford Focus). Competitive Analysis Key Selling Points At Launch: Value for money, modern styling, practicality, fuel efficiency. Key Features Manual Advantage: Empowers owners and technicians with professional-level repair knowledge, saving time and money compared to dealership service. Technical Accuracy: Strives for accuracy, reflecting information available to authorized service departments. 📋 Manual Details Coverage Areas Manual Type: Workshop Repair Service Manual Coverage Focus: Repair and overhaul, general maintenance, troubleshooting. Page Count Page Count Estimated: Extensive (typical for a full workshop manual, likely 1000+ pages when considering all sections and potential diagrams). Manual Type Intended Audience: Professional technicians and knowledgeable DIY enthusiasts. Language Language: English Format File Format: PDF Download Print Quality: Printable 📖 Manual Coverage Systems Covered Engine Mechanical: Engine overhaul, disassembly, assembly, lubrication system, cooling system, fuel system, emission control system. Engine Performance: Tune-ups, ignition system, fuel injection system, performance diagnostics. Transmission: Manual and automatic transmission removal, installation, overhaul, and repair. Drivetrain: Axles, drive shafts, differential (if applicable). Suspension: Front and rear suspension systems, steering components, wheel alignment. Brakes: Brake system diagnostics, repair, replacement of components (pads, rotors, calipers, lines, master cylinder). Electrical System: Wiring diagrams, charging system, starting system, lighting, accessories, fuses, relays. Body And Chassis: Body panel removal/installation, interior trim, doors, windows, structural components. Exhaust System: Exhaust system components, catalytic converter, mufflers. Procedures Included Maintenance: Routine maintenance procedures, fluid checks and changes, filter replacements, lubrication. Removal Installation: Step-by-step instructions for removing and installing major components. Disassembly Assembly: Detailed procedures for taking apart and reassembling various assemblies and sub-assemblies. Diagnostics: Troubleshooting guides, symptom-based diagnostics, fault code interpretation (if applicable). Overhaul: Comprehensive instructions for rebuilding major mechanical components like engines and transmissions. Technical Depth Diagnostic Tools: References to special tools, including Daewoo special tool numbers and illustrations. Torque Specifications: Inclusion of critical torque specifications for fasteners. Proprietary Components: Instructions for proprietary components, often including manufacturer-specific data. 📊 Manual Specifications File Format File Format: PDF Print Quality Printability: Yes Binding Type Binding Type: Digital (Not Applicable - PDF Download) Paper Type Paper Type: Digital (Not Applicable - PDF Download) Delivery Delivery Method: Fast and Free Electronic Delivery via Email ⚙️ Engine Specifications Primary Engine Engine Displacement: Commonly 1.8L (1799cc) and 2.0L (1998cc). The 1.8L (T18SED) was prevalent. Performance Horsepower 1.8L: Approximately 115-120 hp (varies by market and specific engine tune). Torque 1.8L: Approximately 115-120 lb-ft (varies by market and specific engine tune). Horsepower 2.0L: Approximately 128-130 hp (estimated for X20SED variant, if equipped). Torque 2.0L: Approximately 135-140 lb-ft (estimated for X20SED variant, if equipped). Fuel System Fuel Delivery: Multi-point Fuel Injection (MPI) Engine Design Engine Layout: Inline 4-cylinder Engine Block Material: Typically cast iron Cylinder Head Material: Typically aluminum alloy 🔧 Transmission Standard Transmission Type: 5-speed manual transmission was standard on many trims. Optional Transmission Type: 4-speed automatic transmission was a common option. Features Clutch Type: Dry single plate (for manual transmission). 📐 Dimensions Exterior Body Styles: Sedan, Wagon (Estate). Wheelbase: Approximately 2600 mm (102.4 inches) for sedan and wagon. Overall Length: Sedan: ~4500 mm (177.2 in), Wagon: ~4450 mm (175.2 in) (approximate values). Weights Curb Weight: Typically ranging from 1200-1350 kg (2645-2976 lbs) depending on body style and equipment. 🛡️ Safety Features Ratings Crash Test Data: Limited readily available official crash test data for this specific period and region. General safety features were typical for its class. Active Features Braking System: Front: Ventilated discs, Rear: Drums (standard on most models), Rear: Discs on higher trims or specific markets. Passive Features Airbags: Driver and front passenger airbags were standard or optional depending on trim level. 💡 Technology Features Infotainment Audio System: Basic AM/FM radio with CD player or cassette tape. Speaker configuration varies by trim. Driver Assistance ABS: Anti-lock Braking System (ABS) was an option on some models or standard on higher trims. Connectivity Connectivity Options: Limited, typically focused on audio input. No advanced smartphone integration or Bluetooth in base models. 🔧 Maintenance Service Intervals Oil Change Interval: Typically every 7,500-10,000 miles (12,000-16,000 km) or 6-12 months, whichever comes first. Refer to manual for specific engine oil viscosity. Timing Belt Replacement: Crucial: Typically around 60,000 miles (96,000 km) or 4 years for interference engines. Failure can cause severe engine damage. Manual will specify exact interval and procedure. Fluid Specifications Engine Oil Type: API SG or higher. Viscosity likely 10W-30 or 10W-40 depending on climate. Manual will provide precise specifications. Coolant Type: Ethylene glycol-based antifreeze/coolant. Manual will specify color and type (e.g., silicate-free). Transmission Fluid Manual:...
Comprehensive instructions for rebuilding major mechanical components like engines and transmissions.
Technical Depth
Diagnostic Tools:
References to special tools, including Daewoo special tool numbers and illustrations.
Torque Specifications:
Inclusion of critical torque specifications for fasteners.
Proprietary Components:
Instructions for proprietary components, often including manufacturer-specific data.
📊 Manual Specifications
File Format
File Format:
PDF
Print Quality
Printability:
Yes
Binding Type
Binding Type:
Digital (Not Applicable - PDF Download)
Paper Type
Paper Type:
Digital (Not Applicable - PDF Download)
Delivery
Delivery Method:
Fast and Free Electronic Delivery via Email
⚙️ Engine Specifications
Primary Engine
Engine Displacement:
Commonly 1.8L (1799cc) and 2.0L (1998cc). The 1.8L (T18SED) was prevalent.
Performance
Horsepower 1.8L:
Approximately 115-120 hp (varies by market and specific engine tune).
Torque 1.8L:
Approximately 115-120 lb-ft (varies by market and specific engine tune).
Horsepower 2.0L:
Approximately 128-130 hp (estimated for X20SED variant, if equipped).
Torque 2.0L:
Approximately 135-140 lb-ft (estimated for X20SED variant, if equipped).
Fuel System
Fuel Delivery:
Multi-point Fuel Injection (MPI)
Engine Design
Engine Layout:
Inline 4-cylinder
Engine Block Material:
Typically cast iron
Cylinder Head Material:
Typically aluminum alloy
🔧 Transmission
Standard
Transmission Type:
5-speed manual transmission was standard on many trims.
Optional
Transmission Type:
4-speed automatic transmission was a common option.
Features
Clutch Type:
Dry single plate (for manual transmission).
📐 Dimensions
Exterior
Body Styles:
Sedan, Wagon (Estate).
Wheelbase:
Approximately 2600 mm (102.4 inches) for sedan and wagon.
Overall Length:
Sedan: ~4500 mm (177.2 in), Wagon: ~4450 mm (175.2 in) (approximate values).
Weights
Curb Weight:
Typically ranging from 1200-1350 kg (2645-2976 lbs) depending on body style and equipment.
🛡️ Safety Features
Ratings
Crash Test Data:
Limited readily available official crash test data for this specific period and region. General safety features were typical for its class.
Active Features
Braking System:
Front: Ventilated discs, Rear: Drums (standard on most models), Rear: Discs on higher trims or specific markets.
Passive Features
Airbags:
Driver and front passenger airbags were standard or optional depending on trim level.
💡 Technology Features
Infotainment
Audio System:
Basic AM/FM radio with CD player or cassette tape. Speaker configuration varies by trim.
Driver Assistance
ABS:
Anti-lock Braking System (ABS) was an option on some models or standard on higher trims.
Connectivity
Connectivity Options:
Limited, typically focused on audio input. No advanced smartphone integration or Bluetooth in base models.
🔧 Maintenance
Service Intervals
Oil Change Interval:
Typically every 7,500-10,000 miles (12,000-16,000 km) or 6-12 months, whichever comes first. Refer to manual for specific engine oil viscosity.
Timing Belt Replacement:
Crucial: Typically around 60,000 miles (96,000 km) or 4 years for interference engines. Failure can cause severe engine damage. Manual will specify exact interval and procedure.
Fluid Specifications
Engine Oil Type:
API SG or higher. Viscosity likely 10W-30 or 10W-40 depending on climate. Manual will provide precise specifications.
Coolant Type:
Ethylene glycol-based antifreeze/coolant. Manual will specify color and type (e.g., silicate-free).
Transmission Fluid Manual:
GL-4 gear oil, typically 75W-90 or 80W-90. Manual will specify exact type and quantity.
Transmission Fluid Automatic:
Dexron III or equivalent automatic transmission fluid (ATF). Manual will specify exact type and quantity.
Known Issues
Common Problems General:
Potential for minor electrical gremlins, wear and tear on suspension components (bushings, ball joints), and aging of plastic/rubber parts. Timing belt service is critical.
Engine Performance Issues:
Can include rough idle, hesitation due to fuel system or ignition component wear (spark plugs, coils, sensors).
📚 Vehicle History
Brand Heritage
Manufacturer Origin:
South Korea (Daewoo Motor).
Model Evolution
Generation:
J100 (first generation).
Production
Production Years:
1997-2004 (globally), with the specified years 2000-2002 being part of this production run.
Design Influence:
Styled by Giorgetto Giugiaro of Italdesign.
🏆 Awards & Recognition
Recognitions
Market Perception:
Often positioned as an affordable and practical choice, though not always achieving the same brand prestige as established Japanese or European competitors.
Le choix d'une sélection entraîne l'actualisation de la page entière.