Case International 885 Tractor All Service Repair Manual
Prix habituel
$133.00
Prix soldé
$133.00
Prix habituel
Prix unitaire
/ par
Vente
Épuisé
🏷️ Basic Information Identification Make: Case International Model: 885 Tractor 👋 Introduction Market Position Target Audience: Independent mechanics, farm owners, fleet managers, and DIY enthusiasts seeking to maintain and repair the Case International 885 Tractor. Competitive Analysis Value Proposition: Provides comprehensive, expert-level repair information to reduce reliance on costly dealership services and empower owners with self-sufficiency. Key Features Ease Of Access: Instant download format allows for immediate access to repair information. Cost Savings: Enables users to perform repairs themselves, saving significantly on labor costs. Knowledge Enhancement: Provides in-depth understanding of vehicle systems for effective troubleshooting and maintenance. 📋 Manual Details Coverage Areas Primary Coverage: All service and repair aspects Page Count Estimated Pages: Highly comprehensive, likely 500+ pages (typical for full service manuals) Manual Type Type: Service and Repair Manual Language Language: English Format Format: PDF Download 📖 Manual Coverage Systems Covered Engine Service Repair: Detailed procedures for disassembly, assembly, inspection, and repair of the engine. Transmission Service Repair: Comprehensive coverage of gearbox, clutch, PTO, and hydraulic drive systems. Brake System: Service and repair of hydraulic brakes, parking brake mechanisms. Electrical System: Includes wiring diagrams, troubleshooting for starting, charging, lighting, and accessory systems. Suspension: Front axle, steering linkages, and rear suspension components. Steering: Repair and adjustment of steering mechanisms, including power steering. Cooling System: Radiator, fan, water pump, thermostat, and coolant service. Fuel Injection Fuel System: Diesel injection pump, injectors, fuel lines, filters, and tank service. Emission System: Components related to exhaust and emission control (where applicable for the era). Engine Control System: Mechanical control linkages for throttle and governor. Chassis Body: Frame, fenders, operator station, mounting of major components. Axle: Front and rear axle assemblies, differential, and final drives. Restraint System: Seatbelt system for operator safety. Wiring Diagram: Detailed electrical schematics for troubleshooting and repair of the electrical system. Procedures Included General Maintenance: Routine checks, cleaning, lubrication schedules, fluid level checks. Troubleshooting: Systematic diagnostic procedures for identifying and resolving common operational problems. Periodic Lubrication: Detailed lubrication points, types of lubricants, and recommended intervals. Engine Rebuild: Detailed disassembly, inspection, component replacement, and reassembly of the engine. Transmission Overhaul: Instructions for transmission disassembly, gear inspection, bearing replacement, and reassembly. Hydraulic System Repair: Service for hydraulic pump, valves, cylinders, and troubleshooting of hydraulic system faults. Technical Depth Diagnostic Capability: Advanced diagnostic procedures for engine, transmission, and hydraulic systems. Rebuild Procedures: Complete step-by-step instructions for rebuilding major components like engines and transmissions. Specifications Data: Torque values, clearances, tolerances, fluid capacities, and performance data. 📊 Manual Specifications File Format File Type: PDF Software Requirements Reader Software: Adobe PDF Reader required. Archive Software: WinZip or equivalent for extraction. Compatibility Operating Systems: Compatible with all versions of Windows and Mac. Print Quality Digital Fidelity: High-resolution digital reproduction of original service manual content. Binding Type Binding: N/A (Digital Download) Paper Type Paper Type: N/A (Digital Download) ⚙️ Engine Specifications Primary Engine Engine Model Code: Typically a Case 4-239 or similar displacement diesel engine (exact variant depends on specific 885 configuration). Engine Type: Four-cylinder, naturally aspirated, indirect injection diesel. Performance Horsepower Rating: Approx. 70-80 PTO horsepower (varies with specific engine tune and configuration). Torque Rating: Estimated at around 200-220 lb-ft (specifics to be detailed in manual). Fuel System Injection System: Rotary injection pump (e.g., Bosch) with mechanical governor. Fuel Type: Diesel Fuel 🔧 Transmission Standard Transmission Type: Often a 12-speed partially synchronized transmission (e.g., constant mesh gears with synchronizers on certain shifts) with 4 forward gears and 3 ranges, plus reverse. Optional Power Takeoff Pto: Independent PTO, typically 540/1000 RPM selectable. Features Clutch Type: Dual-stage clutch for transmission and PTO engagement. 📐 Dimensions Exterior Wheelbase: Approximately 86 inches (2184 mm). Weights Operating Weight: Typically around 6,500 - 7,500 lbs (2950 - 3400 kg), depending on configuration. Drawbar Horsepower: Rated around 58-65 HP, though PTO HP is higher. 🛡️ Safety Features Ratings Rollover Protection Structure Rops: ROPS (Roll Over Protective Structure) typically standard or available as an option, highly recommended for safety. Active Features Braking System Type: Hydraulic drum or disc brakes (depending on specific model configuration). Passive Features Seatbelt: Seatbelt for operator (if equipped with ROPS). 💡 Technology Features Infotainment Operator Interface: Basic mechanical controls, gauges for engine parameters (oil pressure, temperature, fuel, tachometer, volt meter). Driver Assistance Hydraulic Controls: Advanced hydraulic system for implement control, potentially with draft control and position control. Connectivity Electrical Connectors: Simple wiring harness for lights, starter, alternator; less complex than modern machinery. 🔧 Maintenance Service Intervals Engine Oil Change: Typically every 250-500 operating hours, depending on operating conditions and oil quality. Air Filter Replacement: Based on vacuum indicator or as needed, often 250 hours under normal conditions. Fuel Filter Replacement: Typically every 500 hours or annually. Fluid Specifications Engine Oil Type: API CD or CE rated, SAE 15W-40 or 10W-30 (winter) diesel engine oil. Manual will specify exact grade. Hydraulic Fluid Type:...
Approx. 70-80 PTO horsepower (varies with specific engine tune and configuration).
Torque Rating:
Estimated at around 200-220 lb-ft (specifics to be detailed in manual).
Fuel System
Injection System:
Rotary injection pump (e.g., Bosch) with mechanical governor.
Fuel Type:
Diesel Fuel
🔧 Transmission
Standard
Transmission Type:
Often a 12-speed partially synchronized transmission (e.g., constant mesh gears with synchronizers on certain shifts) with 4 forward gears and 3 ranges, plus reverse.
Optional
Power Takeoff Pto:
Independent PTO, typically 540/1000 RPM selectable.
Features
Clutch Type:
Dual-stage clutch for transmission and PTO engagement.
📐 Dimensions
Exterior
Wheelbase:
Approximately 86 inches (2184 mm).
Weights
Operating Weight:
Typically around 6,500 - 7,500 lbs (2950 - 3400 kg), depending on configuration.
Drawbar Horsepower:
Rated around 58-65 HP, though PTO HP is higher.
🛡️ Safety Features
Ratings
Rollover Protection Structure Rops:
ROPS (Roll Over Protective Structure) typically standard or available as an option, highly recommended for safety.
Active Features
Braking System Type:
Hydraulic drum or disc brakes (depending on specific model configuration).
Passive Features
Seatbelt:
Seatbelt for operator (if equipped with ROPS).
💡 Technology Features
Infotainment
Operator Interface:
Basic mechanical controls, gauges for engine parameters (oil pressure, temperature, fuel, tachometer, volt meter).
Driver Assistance
Hydraulic Controls:
Advanced hydraulic system for implement control, potentially with draft control and position control.
Connectivity
Electrical Connectors:
Simple wiring harness for lights, starter, alternator; less complex than modern machinery.
🔧 Maintenance
Service Intervals
Engine Oil Change:
Typically every 250-500 operating hours, depending on operating conditions and oil quality.
Air Filter Replacement:
Based on vacuum indicator or as needed, often 250 hours under normal conditions.
Fuel Filter Replacement:
Typically every 500 hours or annually.
Fluid Specifications
Engine Oil Type:
API CD or CE rated, SAE 15W-40 or 10W-30 (winter) diesel engine oil. Manual will specify exact grade.
Hydraulic Fluid Type:
Case T.P.S. fluid, or equivalent universal tractor transmission fluid (UTTO) meeting ISO 11158 category 'HV' or API GL-4.
Transmission Fluid Type:
Refer to hydraulic fluid specification, as often shared in powershift or transaxle systems.
Coolant Type:
Ethylene glycol based antifreeze with corrosion inhibitors, mixed 50/50 with water.