Gauges, warning lights, and associated electrical circuits.
HVAC System:
Heater core, blower motor, ventilation ducts, and controls.
Body Exterior:
Doors, hood, trunk lid, fenders, bumpers, glass, seals, and body panel alignment.
Body Interior:
Seats, dashboard, door panels, headliner, carpeting, and trim components.
Emissions Control:
PCV system, EGR system, and catalytic converter (if applicable).
Procedures Included
Routine Maintenance:
Oil changes, filter replacements, fluid checks, lubrication, and general inspection.
Troubleshooting:
Systematic diagnostic procedures for common and uncommon problems.
Disassembly Assembly:
Detailed step-by-step instructions for component removal and installation.
Repair Rebuilding:
Instructions for repairing and rebuilding major mechanical and electrical components.
Adjustment Calibration:
Procedures for adjusting ignition timing, carburetor settings, brake systems, and suspension alignment.
Wiring Diagrams:
Comprehensive electrical wiring diagrams for all vehicle systems.
Torque Specifications:
Detailed torque values for all fasteners during assembly and repair.
Special Tools:
Identification and use of special tools required for specific repair procedures.
Technical Depth
Diagnostic Procedures:
Advanced diagnostics, including electrical testing and component analysis.
Rebuild Instructions:
Full rebuild procedures for engines and transmissions, including specifications for machining.
Schematics:
Detailed schematics for all mechanical and electrical systems.
Illustrations Diagrams:
High-quality illustrations and diagrams to aid in understanding complex procedures.
📊 Manual Specifications
File Format
Digital Format:
PDF
Searchable Text:
Yes
Print Quality
Printability:
High-quality, suitable for printing individual sections or the entire manual.
Binding Type
Digital Access:
Instant download, no physical binding required.
Paper Type
Digital Medium:
N/A (Digital File)
⚙️ Engine Specifications
Primary Engine
Engine Code:
A12 (common for this era/model)
Configuration:
Inline-4 Cylinder
Displacement:
1.2 Liters (1171 cc)
Bore X Stroke:
76.0 mm x 64.5 mm (typical for A12)
Compression Ratio:
8.5:1 (typical for A12)
Performance
Horsepower:
~60-65 HP @ ~5000 RPM (estimated, varies by tuning)
Torque:
~70-75 lb-ft @ ~3000 RPM (estimated, varies by tuning)
Fuel System
Fuel Delivery:
Single Downdraft Carburetor (e.g., Hitachi/Mikuni)
Fuel Type:
Unleaded Gasoline
Fluid Specifications
Engine Oil Type:
API SF or SG, SAE 10W-30 or 20W-50 (refer to manual for exact)
Engine Oil Capacity:
Approx. 3.5 Liters (3.7 US Quarts) with filter (refer to manual)
Coolant Type:
Ethylene Glycol based (50/50 mix with distilled water)
🔧 Transmission
Standard
Type:
4-Speed Manual Transmission
Optional
Type:
3-Speed Automatic Transmission (less common)
Features
Transmission Fluid Type:
Dexron II or equivalent (for Automatic)
📐 Dimensions
Exterior
Wheelbase:
Approx. 2320 mm (91.3 in)
Length:
Approx. 3930 mm (154.7 in)
Width:
Approx. 1595 mm (62.8 in)
Height:
Approx. 1340 mm (52.8 in)
Weights
Curb Weight:
Approx. 800-850 kg (1760-1870 lbs) depending on body style and equipment
Gross Vehicle Weight Rating:
Not readily available, consult specific vehicle documentation
🛡️ Safety Features
Ratings
Crash Test Data:
Limited official crash test data available from NHTSA/IIHS for this specific model year and region. Generally considered basic safety for its era.
Active Features
Brakes:
Front disc brakes, rear drum brakes. No ABS.
Passive Features
Seat Belts:
Standard lap and shoulder belts for front occupants. Lap belts for rear occupants.
Headrests:
Front headrests often integrated into the seat design.
💡 Technology Features
Infotainment
Audio System:
Basic AM/FM radio, optional cassette player. Typically 2-4 speakers.
Driver Assistance
Features:
None in the modern sense. Primarily basic driver controls.
Connectivity
Features:
No connectivity features. Analog controls only.
🔧 Maintenance
Service Intervals
Oil Change:
Every 3,000 miles or 3 months, whichever comes first (typical for the era).
Air Filter:
Inspect every 6 months, replace as needed or every 12-18 months.
Spark Plugs:
Replace every 20,000-30,000 miles.
Coolant Flush:
Every 24,000 miles or 24 months.
Transmission Fluid Change:
Manual: Inspect every 12 months. Automatic: Every 24,000 miles or 24 months (typical).
Fluid Specifications
Brake Fluid:
DOT 3 or DOT 4 (refer to manual for exact).
Clutch Fluid:
DOT 3 or DOT 4 (if hydraulic clutch, refer to manual).
Differential Fluid:
API GL-4, SAE 90 (refer to manual).
Known Issues
Rust Corrosion:
Common issue for vehicles of this age, particularly wheel arches, sills, and floor pans.
Carburetor Tuning:
Can require periodic adjustment due to wear or age.
Electrical Connections:
Corroded or loose connections can lead to intermittent electrical issues.
Suspension Bushings:
Wear on rubber bushings can lead to noise and imprecise handling.
📚 Vehicle History
Brand Heritage
Parent Company:
Nissan Motor Corporation.
Model Evolution
Generation:
First generation (N10) of the Datsun 310/Nissan Pulsar.
Design Influence:
Often cited as a precursor to the Nissan Sentra line.
Production
Production Years:
1979-1982 (for N10 generation).
Manufacturing Locations:
Primarily Japan, with some assembly in other international markets.
🏆 Awards & Recognition
Recognitions
Industry Recognition:
While specific awards for the 1980 Datsun 310 are not widely publicized, the model was part of Datsun's highly successful push into global markets, known for reliability and fuel efficiency during a period of rising fuel costs.
Le choix d'une sélection entraîne l'actualisation de la page entière.