Jeep Grand Cherokee 2000 Service Repair Workshop Manual
Prix habituel
$133.00
Prix soldé
$133.00
Prix habituel
Prix unitaire
/ par
Vente
Épuisé
🏷️ Basic Information Identification Make: Jeep Model: Grand Cherokee Year: 2000 Codes Chassis Code: WJ 👋 Introduction Market Position Vehicle Segment: Mid-size luxury SUV, known for its off-road capabilities and upscale interior for its time. Target Audience: Families and individuals seeking a capable, comfortable, and well-equipped SUV with Jeep's iconic brand heritage. Competitive Analysis Key Competitors: Ford Explorer, Chevrolet Blazer, Toyota 4Runner, Nissan Pathfinder, Land Rover Discovery. Key Features Off Road Capability: Quadra-Coil suspension, available Quadra-Drive 4WD system, and robust construction. Powertrain Options: Renowned inline-6 and powerful V8 engines. Interior Comfort: Spacious cabin, higher trim levels offered premium materials and features. 📋 Manual Details Coverage Areas Manual Type: Service Repair Workshop Manual Language: English Format: Digital (likely PDF, often printable) Page Count Estimated Page Count: Over 1500 pages (typical for comprehensive workshop manuals of this era) 📖 Manual Coverage Systems Covered Engine Mechanical: Detailed procedures for 4.0L I6 and 4.7L V8 engines, including disassembly, inspection, assembly, timing, and component replacement. Engine Fuel System: Fuel delivery, injectors, fuel pump, pressure regulator, and emissions control systems. Engine Ignition System: Spark plugs, coils, distributorless ignition systems (DIS), ignition timing, and control modules. Engine Cooling System: Radiator, water pump, thermostat, coolant, hoses, and fan systems. Engine Lubrication System: Oil pump, oil filter, lubrication passages, and oil pressure diagnosis. Transmission Automatic: 42RE (4-speed) and 45RFE/545RFE (4/5-speed) transmission repair, diagnostics, fluid service, and torque converter procedures. Transmission Manual: Coverage for NV3500 5-speed manual transmission (if applicable, less common for this model year). Transfer Case: NV231, NV242, and NV247 transfer case service, maintenance, and repair. Drivetrain: Front and rear axles (Dana 30, Dana 35, Chrysler 8.25), differential service, CV joints, driveshafts, and wheel bearings. Suspension System: Front and rear suspension components, control arms, ball joints, coil springs, leaf springs (if applicable), shock absorbers, and bushings. Steering System: Power steering pump, steering gear, tie rods, steering linkage, and steering column. Brake System: Front and rear disc brakes, ABS system (including sensors, module, and hydraulic unit), brake fluid, and parking brake. Electrical System: Battery, charging system (alternator), starting system (starter motor), lighting, horn, and basic wiring diagrams. Body Control Modules: Central body controller, interior/exterior lighting, power windows, power locks, and remote keyless entry systems. HVAC System: Heating, ventilation, air conditioning (A/C) system, refrigerant, compressor, condenser, evaporator, and climate control panel. Chassis Electrical: Instrument cluster, gauges, warning lights, cruise control, and onboard diagnostics (OBD-II). Body Exterior: Body panels, doors, hood, tailgate, bumpers, glass, and trim removal/installation. Body Interior: Seats, dashboard, console, door panels, headliner, and interior trim. Procedures Included Maintenance Procedures: Oil changes, filter replacements, fluid checks and flushes, tune-ups, and lubrication. Diagnostic Procedures: Troubleshooting guides for common problems, symptom-based diagnostics, and OBD-II code interpretation. Repair Procedures: Step-by-step instructions for component removal, repair, and reassembly across all major systems. Rebuild Procedures: Detailed guidance for engine and transmission overhauls, including clearances, torque specifications, and part selection. Installation Procedures: Guidance for installing new or replacement components, including critical settings and adjustments. Technical Depth Depth Of Information: Comprehensive, covering everything from basic maintenance to complex diagnostics and full component rebuilds. Suitable for professional mechanics and experienced DIYers. Wiring Diagrams: Includes detailed electrical schematics for various vehicle systems, crucial for troubleshooting electrical faults. Torque Specifications: Extensive list of torque values for all critical fasteners throughout the vehicle. Special Tools: Identifies required special tools for specific procedures, ensuring correct execution and preventing damage. 📊 Manual Specifications File Format Digital File Format: Typically PDF, allowing for digital searchability, easy navigation, and printing of specific sections. Print Quality Digital Reproduction Quality: High resolution, ensuring clarity of text, diagrams, and illustrations for accurate interpretation. Binding Type Physical Format Binding: If printed, typically coil-bound or comb-bound for lay-flat usability in a workshop environment. Paper Type Physical Format Paper: If printed, often on durable, grease-resistant paper suitable for workshop use. ⚙️ Engine Specifications Primary Engine Engine 1 Displacement: 4.0 Liters Engine 1 Configuration: Inline 6-cylinder (I6), OHV Engine 1 Horsepower: 190 hp @ 4600 rpm (approx.) Engine 1 Torque: 235 lb-ft @ 3000 rpm (approx.) Engine 1 Block Material: Cast Iron Engine 1 Head Material: Cast Iron Engine 1 Fuel Delivery: Sequential Multi-Port Fuel Injection (MPI) Optional Engine Engine 2 Displacement: 4.7 Liters Engine 2 Configuration: V8, OHV, 2 valves per cylinder Engine 2 Horsepower: 230 hp @ 4700 rpm (approx.) Engine 2 Torque: 300 lb-ft @ 3200 rpm (approx.) Engine 2 Block Material: Aluminum Alloy Engine 2 Head Material: Aluminum Alloy Engine 2 Fuel Delivery: Sequential Multi-Port Fuel Injection (MPI) 🔧 Transmission Standard Transmission Type Standard: 4-speed Automatic (42RE) Optional Transmission Type Optional: 4-speed Automatic (45RFE) / 5-speed Automatic (545RFE - introduced later in WJ generation) Features 4Wd System: Full-time 4WD standard on most models; optional Quadra-Drive system with electronic limited-slip differentials (ELSD). 📐 Dimensions Exterior Wheelbase: 116.0 inches (2946 mm) Length: 185.5 inches (4712 mm) Width: 74.7 inches...
Body panels, doors, hood, tailgate, bumpers, glass, and trim removal/installation.
Body Interior:
Seats, dashboard, console, door panels, headliner, and interior trim.
Procedures Included
Maintenance Procedures:
Oil changes, filter replacements, fluid checks and flushes, tune-ups, and lubrication.
Diagnostic Procedures:
Troubleshooting guides for common problems, symptom-based diagnostics, and OBD-II code interpretation.
Repair Procedures:
Step-by-step instructions for component removal, repair, and reassembly across all major systems.
Rebuild Procedures:
Detailed guidance for engine and transmission overhauls, including clearances, torque specifications, and part selection.
Installation Procedures:
Guidance for installing new or replacement components, including critical settings and adjustments.
Technical Depth
Depth Of Information:
Comprehensive, covering everything from basic maintenance to complex diagnostics and full component rebuilds. Suitable for professional mechanics and experienced DIYers.
Wiring Diagrams:
Includes detailed electrical schematics for various vehicle systems, crucial for troubleshooting electrical faults.
Torque Specifications:
Extensive list of torque values for all critical fasteners throughout the vehicle.
Special Tools:
Identifies required special tools for specific procedures, ensuring correct execution and preventing damage.
📊 Manual Specifications
File Format
Digital File Format:
Typically PDF, allowing for digital searchability, easy navigation, and printing of specific sections.
Print Quality
Digital Reproduction Quality:
High resolution, ensuring clarity of text, diagrams, and illustrations for accurate interpretation.
Binding Type
Physical Format Binding:
If printed, typically coil-bound or comb-bound for lay-flat usability in a workshop environment.
Paper Type
Physical Format Paper:
If printed, often on durable, grease-resistant paper suitable for workshop use.
⚙️ Engine Specifications
Primary Engine
Engine 1 Displacement:
4.0 Liters
Engine 1 Configuration:
Inline 6-cylinder (I6), OHV
Engine 1 Horsepower:
190 hp @ 4600 rpm (approx.)
Engine 1 Torque:
235 lb-ft @ 3000 rpm (approx.)
Engine 1 Block Material:
Cast Iron
Engine 1 Head Material:
Cast Iron
Engine 1 Fuel Delivery:
Sequential Multi-Port Fuel Injection (MPI)
Optional Engine
Engine 2 Displacement:
4.7 Liters
Engine 2 Configuration:
V8, OHV, 2 valves per cylinder
Engine 2 Horsepower:
230 hp @ 4700 rpm (approx.)
Engine 2 Torque:
300 lb-ft @ 3200 rpm (approx.)
Engine 2 Block Material:
Aluminum Alloy
Engine 2 Head Material:
Aluminum Alloy
Engine 2 Fuel Delivery:
Sequential Multi-Port Fuel Injection (MPI)
🔧 Transmission
Standard
Transmission Type Standard:
4-speed Automatic (42RE)
Optional
Transmission Type Optional:
4-speed Automatic (45RFE) / 5-speed Automatic (545RFE - introduced later in WJ generation)
Features
4Wd System:
Full-time 4WD standard on most models; optional Quadra-Drive system with electronic limited-slip differentials (ELSD).
📐 Dimensions
Exterior
Wheelbase:
116.0 inches (2946 mm)
Length:
185.5 inches (4712 mm)
Width:
74.7 inches (1897 mm)
Height:
67.4 inches (1712 mm)
Ground Clearance:
Approx. 8.7 inches (221 mm)
Weights
Curb Weight:
4,300 - 4,600 lbs (approx., depending on engine and trim)
Towing Capacity:
Up to 6,500 lbs (with proper equipment and trailer package)
Payload Capacity:
Approx. 1,200 - 1,400 lbs
🛡️ Safety Features
Ratings
NHTSA Rollover Resistance:
4/5 Star (for models equipped with side airbags)
Active Features
ABS:
Standard Anti-lock Braking System (ABS)
Traction Control:
Optional (Trac-Tech on some models)
Four Wheel Drive:
Standard full-time 4WD or optional Quadra-Drive system with ELSD
Passive Features
Airbags:
Driver and front passenger airbags; optional front seat-mounted side airbags.
Seat Belts:
Three-point seat belts with pretensioners for front occupants.
💡 Technology Features
Infotainment
Audio System:
Available with premium Infinity Gold sound system, CD player, and cassette player.
Navigation:
Optional factory navigation system available on higher trim levels.
Driver Assistance
Cruise Control:
Standard electronic cruise control.
Memory Seats:
Available on Limited trims with power adjustable seats.
Connectivity
Remote Keyless Entry:
Standard or available remote keyless entry system.
🔧 Maintenance
Service Intervals
Oil Change Interval:
Typically every 3,000 to 5,000 miles or 6 months, depending on driving conditions and oil type (refer to manual for precise intervals).
Transmission Fluid Change:
Every 30,000 to 60,000 miles (varies by transmission and fluid type, check manual).
Coolant Flush Interval:
Every 30,000 to 100,000 miles or 2-5 years, depending on coolant type (refer to manual).
Fluid Specifications
Engine Oil Type 4.0L:
API SN, SAE 5W-30 (check manual for specific viscosity and certifications)
Engine Oil Type 4.7L:
API SN, SAE 5W-30 (check manual for specific viscosity and certifications)
Transmission Fluid Type 42Re:
ATF+4 (Mopar)
Transmission Fluid Type 45Rfe/545Rfe:
ATF+4 (Mopar)
Coolant Type:
Mopar OAT (Orange) Antifreeze/Coolant, 50/50 mix with distilled water.
Brake Fluid Type:
DOT 3
Known Issues
Cracked Cylinder Heads 4.7L:
The 4.7L V8 engine was known to be susceptible to cracked cylinder heads under certain conditions, particularly related to overheating.
Transmission Issues 42Re:
The 42RE transmission could experience issues like slipping or delayed engagement, often due to solenoid pack failure or low fluid.
Heater Core Leaks:
Heater core leaks were a relatively common complaint in the WJ generation, often requiring dashboard removal for replacement.
Power Window Motors:
Failure of power window motors and regulators was also a recurring issue.
📚 Vehicle History
Brand Heritage
Jeep Legacy:
Jeep has a long-standing reputation for robust off-road vehicles dating back to World War II.
Model Evolution
Wj Generation Introduction:
The WJ Grand Cherokee replaced the ZJ generation and was introduced for the 1999 model year, continuing through 2004. This generation marked a significant redesign with a focus on improved on-road refinement and luxury.
Key Design Changes Wj:
Unibody construction, independent front suspension (Quadra-Coil), a wider track, and a more luxurious interior compared to its predecessor.
Production
Manufacturing Location:
Jefferson North Assembly, Detroit, Michigan, USA.
🏆 Awards & Recognition
Recognitions
Off Road Magazine Awards:
The Grand Cherokee, particularly in its early WJ iterations, was often praised by off-road publications for its capability.
Competitor Comparisons:
Frequently benchmarked against luxury SUVs from European and Japanese manufacturers, often holding its own in terms of ruggedness and available features.
Le choix d'une sélection entraîne l'actualisation de la page entière.