Peterbilt 379 Model Electrical wiring Schematics Manual

Prix habituel: $133.00
Prix soldé: $133.00
Prix habituel
Prix unitaire: par

🏷️ Basic Information Identification Make: Peterbilt Model: 379 / 379E Product Type: Electrical Wiring Schematics Manual Codes Model Codes: 379, 379E 👋 Introduction Market Position Vehicle Segment: Heavy-duty commercial truck, known for its robustness, customization, and suitability for long-haul trucking and specialized applications. Build Quality Reputation: Peterbilt vehicles are known for their robust construction and premium materials, making them a preferred choice for demanding vocational and line-haul applications. Competitive Analysis Key Competitors: Kenworth W900, Freightliner FLD120, International 9000 series. Key Features Model Attributes: Renowned for its classic styling, driver comfort, and extensive customization options. The 379 model line has a strong following among owner-operators. Manual Value Proposition Purpose: Essential resource for technicians and owner-operators responsible for maintaining, troubleshooting, and repairing the complex electrical systems of the Peterbilt 379 and 379E models. Crucial for understanding factory wiring and aftermarket modifications. Audience: Primarily targeted at Peterbilt dealership technicians, independent repair shops specializing in heavy-duty trucks, and knowledgeable owner-operators who perform their own maintenance and repairs. 📋 Manual Details Coverage Areas Primary Coverage: Electrical system schematics, component locations, harness architecture Specific Systems: Charge/Start, Power Distribution (unswitched, ignition, accessory), Circuit Breakers, Lighting (turn signals, hazard, stop, marker, clearance, headlamps, fog, load lights), Back-up Lights, Cab/Sleeper HVAC, Door Locks, Keyless Entry, Interior/Exterior Lights, Power Outlets, Wiper/Washer, Horn, CB Radio, Dash Radio, Speakers, Clock, HVAC, HVAC Controls, Fuel Level, Park Brake, ABS Systems (Bendix, Wabco), Engine Specific Wiring (CAT C11/C13/C15, Cummins ISM/ISC/ISL/ISX), Transmission Specific Wiring (Eaton, Allison, Meritor), Telematics, Idle Control, Lift Axle Control, Engine Brake Controls Sleeper Configurations: Detailed schematics for 36", 48" High Roof, 63" High Roof, 70" sleepers, and 48"/63" Low Roof sleepers ensure coverage for a wide array of customer preferences. Page Count Estimated Pages: 98+ (based on index listing) Section Count: 98 sections detailed in the index. Manual Type Type: Technical Service Manual / Wiring Diagram Manual Language Language: English Format Format: Likely Printed or Digital (PDF) 📖 Manual Coverage Systems Covered Electrical Architecture: Detailed harness architecture, including main cab, sleeper, and chassis harnesses. NAMUX and J1939 architecture coverage. Power Management: Unswitched power, ignition-switched power, accessory-switched power, and power distribution through circuit breakers. ECU power supply. Lighting Systems: Comprehensive coverage of all exterior and interior lighting, including headlamps, taillamps, marker/clearance lamps, fog lamps, cab dome lights, sleeper lights, and load lights for various configurations. Comfort And Convenience: Electrical aspects of power windows, mirror controls (standard, motorized, heated), cab door locks, remote keyless entry, HVAC controls for both cab and sleeper, and power outlets. Infotainment And Communication: Wiring for dash radio, CB radio, and cab roof speakers (multiple configurations). Wiring for sleeper entertainment systems. Braking And Suspension Controls: Wiring for ABS systems (Bendix, Wabco for chassis and trailer), air dryer, park brake, lift axle controls (with and without auto-reverse), and fifth wheel controls. Powertrain Diagnostics And Control: Extensive coverage of engine-specific wiring schematics for various Caterpillar (C11, C13, C15) and Cummins (ISM, ISC, ISL, ISX) engines, including specific service packages. Coverage for Eaton Ultrashift/Autoshift, Meritor Freedomline, and Allison WTEC transmissions. Includes sensors like fuel level, axle temperatures, oil temperatures, and fuel filter restriction. Advanced Diagnostics And Control: Schematics for Telementics, Icon2 Idle Control, J1939 architecture, VORAD, and Tire Pressure Control Systems (TPCS). Chassis Specific Systems: Includes chassis-specific wiring for air dryer, fifth wheel, differential lock, suspension dump valve, park brake, and various sensor inputs like axle temperatures and fuel filter restriction. Lighting Detail: Includes specific wiring for Left Pole and Right Pole clearance lights, commonly found on Peterbilt vehicles. Cab Interior Lighting: Details wiring for cab dome lights, door lamps, door jamb lights, and footlights, crucial for driver visibility and convenience. Accessory Power: Covers power points (cigarette lighter, auxiliary power outlets) in both the cab and sleeper, important for mobile electronics. Body Electrical: Extensive coverage of door electrical window lifts for both driver and passenger side doors. HVAC Electrical: Wiring schematics for both Cab HVAC and Sleeper HVAC systems, essential for climate control. Instrumentation And Gauges: Includes wiring for the clock, backlighting for instruments, and panel lamp dimmers, crucial for driver information and cockpit ambiance. Auxiliary Systems: Wiring for electric horn, wiper/washer systems, and various auxiliary switches and controls like fifth wheel actuation, diff lock, and suspension dump valves. Engine Ancillary Controls: Coverage for engine brake controls, engine fan controls, and potentially PTO controls, which are integrated with the powertrain. Procedures Included Troubleshooting Guidance: Implied through detailed schematics allowing for diagnosis of electrical faults, circuit breaks, shorts, and open circuits. Component location information aids in physical inspection and repair. Component Identification: Explicitly covers location of major components within the cab and chassis. Symbols index provides clear identification of electrical symbols used in schematics. System Verification: Enables verification of proper electrical connections, voltage readings, and signal flow for various systems. Electrical Troubleshooting: The primary function of this manual is to support electrical troubleshooting...

18 people are viewing this right now

Taper: Truck

Distributeur:

UGS: 131034

Collections: ALL Trucks

Disponibilité: En stock

Mots clés: 379 Peterbilt Truck Trucks

Variantes de produits

Description

🏷️ Basic Information

Identification

Make:

Peterbilt

Model:

379 / 379E

Product Type:

Electrical Wiring Schematics Manual

Codes

Model Codes:

379, 379E

👋 Introduction

Market Position

Vehicle Segment:

Heavy-duty commercial truck, known for its robustness, customization, and suitability for long-haul trucking and specialized applications.

Build Quality Reputation:

Peterbilt vehicles are known for their robust construction and premium materials, making them a preferred choice for demanding vocational and line-haul applications.

Competitive Analysis

Key Competitors:

Kenworth W900, Freightliner FLD120, International 9000 series.

Key Features

Model Attributes:

Renowned for its classic styling, driver comfort, and extensive customization options. The 379 model line has a strong following among owner-operators.

Manual Value Proposition

Purpose:

Essential resource for technicians and owner-operators responsible for maintaining, troubleshooting, and repairing the complex electrical systems of the Peterbilt 379 and 379E models. Crucial for understanding factory wiring and aftermarket modifications.

Audience:

Primarily targeted at Peterbilt dealership technicians, independent repair shops specializing in heavy-duty trucks, and knowledgeable owner-operators who perform their own maintenance and repairs.

📋 Manual Details

Coverage Areas

Primary Coverage:

Electrical system schematics, component locations, harness architecture

Specific Systems:

Charge/Start, Power Distribution (unswitched, ignition, accessory), Circuit Breakers, Lighting (turn signals, hazard, stop, marker, clearance, headlamps, fog, load lights), Back-up Lights, Cab/Sleeper HVAC, Door Locks, Keyless Entry, Interior/Exterior Lights, Power Outlets, Wiper/Washer, Horn, CB Radio, Dash Radio, Speakers, Clock, HVAC, HVAC Controls, Fuel Level, Park Brake, ABS Systems (Bendix, Wabco), Engine Specific Wiring (CAT C11/C13/C15, Cummins ISM/ISC/ISL/ISX), Transmission Specific Wiring (Eaton, Allison, Meritor), Telematics, Idle Control, Lift Axle Control, Engine Brake Controls

Sleeper Configurations:

Detailed schematics for 36", 48" High Roof, 63" High Roof, 70" sleepers, and 48"/63" Low Roof sleepers ensure coverage for a wide array of customer preferences.

Page Count

Estimated Pages:

98+ (based on index listing)

Section Count:

98 sections detailed in the index.

Manual Type

Type:

Technical Service Manual / Wiring Diagram Manual

Language

Language:

English

Format

Format:

Likely Printed or Digital (PDF)

📖 Manual Coverage

Systems Covered

Electrical Architecture:

Detailed harness architecture, including main cab, sleeper, and chassis harnesses. NAMUX and J1939 architecture coverage.

Power Management:

Unswitched power, ignition-switched power, accessory-switched power, and power distribution through circuit breakers. ECU power supply.

Lighting Systems:

Comprehensive coverage of all exterior and interior lighting, including headlamps, taillamps, marker/clearance lamps, fog lamps, cab dome lights, sleeper lights, and load lights for various configurations.

Comfort And Convenience:

Electrical aspects of power windows, mirror controls (standard, motorized, heated), cab door locks, remote keyless entry, HVAC controls for both cab and sleeper, and power outlets.

Infotainment And Communication:

Wiring for dash radio, CB radio, and cab roof speakers (multiple configurations). Wiring for sleeper entertainment systems.

Braking And Suspension Controls:

Wiring for ABS systems (Bendix, Wabco for chassis and trailer), air dryer, park brake, lift axle controls (with and without auto-reverse), and fifth wheel controls.

Powertrain Diagnostics And Control:

Extensive coverage of engine-specific wiring schematics for various Caterpillar (C11, C13, C15) and Cummins (ISM, ISC, ISL, ISX) engines, including specific service packages. Coverage for Eaton Ultrashift/Autoshift, Meritor Freedomline, and Allison WTEC transmissions. Includes sensors like fuel level, axle temperatures, oil temperatures, and fuel filter restriction.

Advanced Diagnostics And Control:

Schematics for Telementics, Icon2 Idle Control, J1939 architecture, VORAD, and Tire Pressure Control Systems (TPCS).

Chassis Specific Systems:

Includes chassis-specific wiring for air dryer, fifth wheel, differential lock, suspension dump valve, park brake, and various sensor inputs like axle temperatures and fuel filter restriction.

Lighting Detail:

Includes specific wiring for Left Pole and Right Pole clearance lights, commonly found on Peterbilt vehicles.

Cab Interior Lighting:

Details wiring for cab dome lights, door lamps, door jamb lights, and footlights, crucial for driver visibility and convenience.

Accessory Power:

Covers power points (cigarette lighter, auxiliary power outlets) in both the cab and sleeper, important for mobile electronics.

Body Electrical:

Extensive coverage of door electrical window lifts for both driver and passenger side doors.

HVAC Electrical:

Wiring schematics for both Cab HVAC and Sleeper HVAC systems, essential for climate control.

Instrumentation And Gauges:

Includes wiring for the clock, backlighting for instruments, and panel lamp dimmers, crucial for driver information and cockpit ambiance.

Auxiliary Systems:

Wiring for electric horn, wiper/washer systems, and various auxiliary switches and controls like fifth wheel actuation, diff lock, and suspension dump valves.

Engine Ancillary Controls:

Coverage for engine brake controls, engine fan controls, and potentially PTO controls, which are integrated with the powertrain.

Procedures Included

Troubleshooting Guidance:

Implied through detailed schematics allowing for diagnosis of electrical faults, circuit breaks, shorts, and open circuits. Component location information aids in physical inspection and repair.

Component Identification:

Explicitly covers location of major components within the cab and chassis. Symbols index provides clear identification of electrical symbols used in schematics.

System Verification:

Enables verification of proper electrical connections, voltage readings, and signal flow for various systems.

Electrical Troubleshooting:

The primary function of this manual is to support electrical troubleshooting by providing the logical paths of all circuits, aiding in the systematic identification of faults.

Technical Depth

Depth:

High - provides detailed, specific wiring diagrams necessary for advanced troubleshooting, repair, and modification of the electrical system. Covers factory configurations for a wide range of options and sleeper configurations.

Component Level Detail:

Provides specific wire colors, connector pinouts, and component designations, enabling detailed diagnostics and repair at a component level.

System Interconnections:

Illustrates how various systems (e.g., engine, transmission, ABS, lighting) are interconnected through the main electrical harnesses and data buses (J1939).

Troubleshooting Approach:

The systematic breakdown of circuits by function (e.g., power distribution, specific lighting) facilitates a logical troubleshooting process.

📊 Manual Specifications

File Format

Format Details:

If digital, likely a searchable PDF with high-resolution schematics. If printed, expects clear, legible diagrams and text.

Print Quality

Quality:

Assumed to be professional quality for clarity and accuracy of diagrams. High contrast for component lines and labels.

Binding Type

Binding:

If printed, likely a durable binding suitable for shop use (e.g., spiral-bound, perfect-bound).

Paper Type

Paper Quality:

If printed, expects durable, matte finish paper to minimize glare and withstand handling in a workshop environment.

Format

Digital Features:

If digital, expects hyperlinks within the document for cross-referencing, and the ability to zoom into complex diagrams for clarity.

Indexing Method:

Features a comprehensive index that is vital for navigating the extensive schematics, with multiple listings for symbols and continued sections.

⚙️ Engine Specifications

Primary Engine

Engine Options:

The manual covers wiring for a wide range of heavy-duty diesel engines, specifically listing Caterpillar (C11, C13, C15) and Cummins (ISM, ISC, ISL, ISX) engines. Additional mention of BJ Services specific engine configurations implies further detail.

Engine Control Wiring:

Detailed wiring for Engine Control Modules (ECM) for all listed engine variants, including power, ground, sensor inputs, and actuator outputs.

Performance

Performance Details:

Specific performance figures (HP, torque) are not detailed in the index, but the wiring schematics are critical for engine control units (ECU) and their associated sensor/actuator circuits, which directly impact performance.

Fuel System

Fuel System Wiring:

Includes wiring for fuel level sensors, fuel filter restriction sensors, and potentially fuel pump circuits depending on specific engine installations.

🔧 Transmission

Standard

Transmission Types Covered:

Covers electrical interfaces for Eaton Ultrashift, Eaton Autoshift, Meritor Freedomline, and Allison WTEC transmissions, including continued sections for some models, indicating comprehensive coverage.

Optional

Auxiliary Transmission Features:

Includes wiring for auxiliary transmission oil temperature sensors and PTO oil temperature sensors.

Features

Transmission Control Wiring:

Detailed schematics for the electrical control modules and wiring harnesses associated with these advanced automatic and automated manual transmissions are provided.

Transmission Control Wiring

Transmission ECU Connections:

Includes wiring schematics for Transmission Control Modules (TCM) on automated transmissions, covering shifts, solenoid control, and sensor inputs.

📐 Dimensions

Exterior

Sleeper Options Covered:

Specific electrical coverage is provided for various sleeper configurations: 48"/63" High Roof, 48"/63" Low Roof, 70" Sleeper, and 36" Sleeper. This implies that dimension-related electrical options for these variants are addressed.

Weights

Weight Related Systems:

Includes wiring for systems that can be influenced by weight, such as lift axle controls and potentially suspension dump valves.

🛡️ Safety Features

Ratings

Safety System Coverage:

Comprehensive coverage of ABS systems (Bendix, Wabco) for both tractor and trailer, which are critical safety components. Also covers lighting systems essential for visibility and signaling.

Active Features

Active Safety Wiring:

Wiring for systems like ABS, which are active safety features, are detailed. Potentially VORAD (Vehicle Obstacle Radar) wiring if equipped.

Traction Control Wiring:

ABS systems, particularly those with traction control capabilities, will have detailed wiring coverage within the Bendix and Wabco sections.

Passive Features

Passive Safety Wiring:

Wiring for interior and exterior lighting, door locks, and alarm systems can be considered related to passive safety and security.

💡 Technology Features

Infotainment

Infotainment Systems:

Detailed wiring for dash radio, CB radio, and various speaker configurations for both cab and sleeper, covering factory-installed audio and communication systems.

Speaker Configurations:

Distinguishes between Concert Class, Concert Class Premium, and Concert Class EHD speaker systems, indicating specific wiring differences for audio quality enhancements.

Driver Assistance

Driver Assistance Wiring:

Includes wiring related to ABS systems, which enhance vehicle safety. Also covers components like remote keyless entry, power mirrors, and power windows that contribute to driver convenience and potentially reduce fatigue.

Mirror Systems:

Detailed coverage for standard, motorized, and heated mirrors, including mirror control circuits, highlights the advanced driver comfort and visibility features available.

Connectivity

Connectivity Systems:

Coverage of Telematics systems indicates wiring for communication modules that transmit vehicle data, allowing for remote monitoring and diagnostics.

Powertrain Control

Powertrain Technology:

Extensive wiring diagrams for modern electronic engine controls (CAT, Cummins) and transmissions (Eaton, Allison, Meritor) represent the sophisticated electronic management systems of the era.

🔧 Maintenance

Service Intervals

Maintenance Implications:

While the manual doesn't list intervals, understanding the electrical system's layout and component locations is critical for performing scheduled maintenance tasks, such as checking fuses, relays, and connections, as well as troubleshooting intermittent electrical issues that can arise over time.

Fluid Specifications

Fluid Related Sensors:

The manual includes wiring for sensors related to various fluids, such as auxiliary transmission oil temperature and general oil temperature, indicating the need to ensure these fluid levels and conditions are maintained.

Sensor Related Fluids:

Sensors for fuel filter restriction, various oil temperatures (transmission, general), and tire pressure indicate the importance of maintaining appropriate fluid levels and types for sensor accuracy and component longevity.

Known Issues

Common Electrical Concerns:

Heavy-duty trucks are prone to electrical gremlins due to vibration, environmental exposure, and the complexity of their systems. Common issues can include faulty grounds, corroded connectors, damaged wiring from chassis flex, and intermittent failures of switches and relays. This manual is indispensable for diagnosing these.

Electrical Connector Concerns:

Specific attention to trailer ABS connectors, main cab firewall bulkhead connections, and various chassis sensor add-ons highlight potential areas of electrical connection failure or corrosion.

📚 Vehicle History

Brand Heritage

Peterbilt Legacy:

Peterbilt is a storied American manufacturer of commercial vehicles, known for its premium quality, durability, and iconic styling, especially in its conventional truck lines like the 379.

Model Evolution

379 Significance:

The 379 was a long-standing flagship model, representing a blend of classic design with modern amenities and powertrain options. It was a successor to models like the 377 and predecessor to newer designs. The 379E variant likely introduced specific electrical or component updates.

379E Distinction:

The 'E' in 379E might denote specific evolutionary updates, possibly related to emission controls, new engine integration, or enhanced electrical features compared to earlier 379 models.

Production

Production Era Implication:

The 379 was produced from 1987 to 2007, meaning this manual likely covers a broad range of model years within that span, accommodating the evolution of electrical systems during that period.

🏆 Awards & Recognition

Recognitions

Model Reputation:

While specific awards for the 379 model are not detailed, Peterbilt trucks consistently receive accolades for build quality, driver satisfaction, and performance in the heavy-duty sector. The 379 is often cited as a benchmark for classic American highway trucks.