🏷️ Basic Information Identification Make: Mazda Model: RX-7 Model Designation: FD3S Year: 2000 Generation Generation Code: FD Generation Years: 1992-2002 Codes Chassis Code: FD3S Engine Code: 13B-REW 👋 Introduction Market Position Positioning: The Mazda RX-7 (FD generation) in 2000 represented the pinnacle of rotary-powered sports car engineering, known for its sophisticated twin-turbocharged engine, exceptional handling, and distinctive styling. It competed with other high-performance sports cars of its era. Competitive Analysis Key Competitors: Nissan 300ZX (Z32), Toyota Supra (Mk IV), Porsche 911 (996 generation), Chevrolet Corvette (C5) Key Features Defining Characteristics: Rotary engine, twin-turbocharging, lightweight chassis, near 50/50 weight distribution, advanced suspension geometry, distinctive 'floating' rear cabin design. Target Audience For Manual: Enthusiasts, DIY mechanics, performance tuners, and professional workshops specializing in rotary engines or JDM sports cars. 📋 Manual Details Coverage Areas Primary Regions Covered: Global (specific market variations may apply) Trim Levels Covered: All trim levels available for the 2000 model year Page Count Estimated Page Count: 1000+ Manual Type Type: Factory Service Manual (FSM) / Workshop Manual Language Language: English Format Format: Digital Download (PDF) 📖 Manual Coverage Systems Covered Engine Mechanical: Complete overhaul, disassembly, assembly, lubrication, cooling system, fuel system, ignition system, exhaust system, emissions control Engine Rotary Specific: Apex seal inspection, rotor housing condition, eccentric shaft, oil injection system, twin-turbocharger system (sequential turbo operation) Transmission: Manual transmission (R154 variant typically), clutch system, gear shift linkage, drivetrain, propeller shaft, differential Brakes: Hydraulic system, ABS (Anti-lock Braking System), front and rear brake calipers, rotors, brake pads, parking brake Suspension: Front and rear suspension components, shock absorbers, springs, control arms, bushings, wheel alignment specifications Steering: Power steering system, steering rack, steering column, tie rods Electrical System: Battery, charging system (alternator), starting system, ignition system, lighting, instrumentation, power accessories, fuse box diagrams, wiring diagrams Climate Control: HVAC system, air conditioning, heater core, blower motor, refrigerant system Body And Chassis: Body panel removal and installation, structural components, door mechanisms, glass, interior trim, exterior trim, underbody coatings Diagnostic Troubleshooting: Diagnostic trouble codes (DTCs), symptom-based troubleshooting charts, repair procedures for common faults Procedures Included Routine Maintenance: Oil changes, filter replacements, fluid checks and top-offs, spark plug replacement (if applicable to rotary design), ignition system timing Component Overhaul: Engine rebuild (apex seals, housing resurfacing, eccentric shaft), transmission rebuild, brake caliper overhaul, suspension component replacement Troubleshooting Guides: Step-by-step diagnostic procedures for various systems and symptoms Wiring Diagrams: Detailed electrical schematics for all vehicle systems Specifications And Tolerances: Torque specifications, clearances, fluid capacities, electrical resistance values Special Tool Identification: Listing of necessary specialized tools for specific repair procedures Technical Depth Depth Of Coverage: Comprehensive: Covers everything from basic fluid changes to complete engine and transmission rebuilds, including complex electrical diagnostics and bodywork. Diagnostic Capabilities: Advanced diagnostic procedures, including the use of specific diagnostic tools and interpretation of sensor data. 📊 Manual Specifications File Format Digital Format: PDF (Portable Document Format) Searchability: Searchable text content for quick information retrieval Print Quality Resolution: High-resolution scans of original factory documentation Binding Type Binding: N/A (Digital Download) Paper Type Paper Type: N/A (Digital Download) ⚙️ Engine Specifications Primary Engine Engine Type: Rotary (Wankel) Engine Code: 13B-REW Configuration: Twin-rotor, twin-turbocharged, intercooled Displacement: 1.3 L (1308 cc) - rated at 2.6 L equivalent by some conventions due to rotor movement Power Output: 255 hp @ 6500 rpm (US-spec) Torque Output: 217 lb-ft @ 5000 rpm (US-spec) Redline: 8000 rpm Performance Boost Pressure: Sequential twin-turbo system: Primary turbo 10-12 psi, Secondary turbo 14-16 psi (varies by market and specific tuning) Fuel System Fuel Delivery: Electronic fuel injection (EFI) with sequential twin-turbo control Fuel Type: Unleaded premium gasoline (91 octane or higher recommended) Ignition System: Direct ignition system with trailing and leading spark plugs per rotor 🔧 Transmission Standard Type: 6-speed manual Model: Often referred to as the R154 (though specific Mazda codes apply) Optional Type: 4-speed automatic (less common, usually in non-performance focused trims or markets) Features Clutch Type: Hydraulically actuated, multi-plate wet clutch (typical for rotary applications) Drivetrain: Rear-wheel drive (RWD) 📐 Dimensions Exterior Length: 166.7 inches (4235 mm) Width: 69.1 inches (1755 mm) Height: 48.2 inches (1225 mm) Wheelbase: 95.5 inches (2425 mm) Ground Clearance: approx. 5.1 inches (130 mm) Weights Curb Weight: approx. 2850-3000 lbs (1293-1361 kg) Gross Vehicle Weight Rating: N/A (Typically not specified for sports cars of this era in a consumer-facing way, but present in service data) 🛡️ Safety Features Ratings NHTSA Front Impact: Not comprehensively rated by NHTSA in the US during its production years due to niche status and older testing protocols. IIHS Side Impact: Not comprehensively rated by IIHS. Active Features ABS: Standard Anti-lock Braking System Traction Control: Available (TCS) on some models/trims Passive Features Airbags: Driver and passenger front airbags Seatbelts: Three-point inertia-reel seatbelts with pre-tensioners Chassis Design: Reinforced safety cage structure 💡 Technology Features Infotainment Audio System: Factory AM/FM/CD player with speaker...
The Mazda RX-7 (FD generation) in 2000 represented the pinnacle of rotary-powered sports car engineering, known for its sophisticated twin-turbocharged engine, exceptional handling, and distinctive styling. It competed with other high-performance sports cars of its era.
Competitive Analysis
Key Competitors:
Nissan 300ZX (Z32), Toyota Supra (Mk IV), Porsche 911 (996 generation), Chevrolet Corvette (C5)
Listing of necessary specialized tools for specific repair procedures
Technical Depth
Depth Of Coverage:
Comprehensive: Covers everything from basic fluid changes to complete engine and transmission rebuilds, including complex electrical diagnostics and bodywork.
Diagnostic Capabilities:
Advanced diagnostic procedures, including the use of specific diagnostic tools and interpretation of sensor data.
📊 Manual Specifications
File Format
Digital Format:
PDF (Portable Document Format)
Searchability:
Searchable text content for quick information retrieval
Print Quality
Resolution:
High-resolution scans of original factory documentation
Binding Type
Binding:
N/A (Digital Download)
Paper Type
Paper Type:
N/A (Digital Download)
⚙️ Engine Specifications
Primary Engine
Engine Type:
Rotary (Wankel)
Engine Code:
13B-REW
Configuration:
Twin-rotor, twin-turbocharged, intercooled
Displacement:
1.3 L (1308 cc) - rated at 2.6 L equivalent by some conventions due to rotor movement
Power Output:
255 hp @ 6500 rpm (US-spec)
Torque Output:
217 lb-ft @ 5000 rpm (US-spec)
Redline:
8000 rpm
Performance
Boost Pressure:
Sequential twin-turbo system: Primary turbo 10-12 psi, Secondary turbo 14-16 psi (varies by market and specific tuning)
Fuel System
Fuel Delivery:
Electronic fuel injection (EFI) with sequential twin-turbo control
Fuel Type:
Unleaded premium gasoline (91 octane or higher recommended)
Ignition System:
Direct ignition system with trailing and leading spark plugs per rotor
🔧 Transmission
Standard
Type:
6-speed manual
Model:
Often referred to as the R154 (though specific Mazda codes apply)
Optional
Type:
4-speed automatic (less common, usually in non-performance focused trims or markets)
Features
Clutch Type:
Hydraulically actuated, multi-plate wet clutch (typical for rotary applications)
Drivetrain:
Rear-wheel drive (RWD)
📐 Dimensions
Exterior
Length:
166.7 inches (4235 mm)
Width:
69.1 inches (1755 mm)
Height:
48.2 inches (1225 mm)
Wheelbase:
95.5 inches (2425 mm)
Ground Clearance:
approx. 5.1 inches (130 mm)
Weights
Curb Weight:
approx. 2850-3000 lbs (1293-1361 kg)
Gross Vehicle Weight Rating:
N/A (Typically not specified for sports cars of this era in a consumer-facing way, but present in service data)
🛡️ Safety Features
Ratings
NHTSA Front Impact:
Not comprehensively rated by NHTSA in the US during its production years due to niche status and older testing protocols.
IIHS Side Impact:
Not comprehensively rated by IIHS.
Active Features
ABS:
Standard Anti-lock Braking System
Traction Control:
Available (TCS) on some models/trims
Passive Features
Airbags:
Driver and passenger front airbags
Seatbelts:
Three-point inertia-reel seatbelts with pre-tensioners
Chassis Design:
Reinforced safety cage structure
💡 Technology Features
Infotainment
Audio System:
Factory AM/FM/CD player with speaker system. Bose premium audio system was optional on higher trims.
Instrument Cluster:
Analog gauges including tachometer, speedometer, fuel, coolant temperature, oil pressure, and boost gauge. Digital odometer.
Driver Assistance
Cruise Control:
Standard on most models
Limited Slip Differential:
Available on performance-oriented trims (e.g., Type R)
Connectivity
No Advanced Connectivity:
No Bluetooth, USB, or Wi-Fi connectivity. Primarily focused on core driving dynamics and performance.
🔧 Maintenance
Service Intervals
Engine Oil Change:
Every 3,000 - 5,000 miles (5,000 - 8,000 km) or 6 months, whichever comes first. Rotary engines are sensitive to oil quality and level.
Oil Filter Replacement:
With every oil change
Air Filter Replacement:
Every 15,000 - 30,000 miles (24,000 - 48,000 km) or as needed based on driving conditions
Spark Plug Replacement:
Refer to manual, typically 30,000 - 60,000 miles (48,000 - 96,000 km) for leading and trailing plugs. Use of specific rotary plugs is crucial.
Coolant Flush:
Every 30,000 miles (48,000 km) or 2 years
Belt Inspection/Replacement:
Inspect annually, replace as needed or every 60,000 miles (96,000 km)
Fluid Specifications
Engine Oil:
API SG or higher, SAE 5W-30 or 10W-30 synthetic or semi-synthetic. Crucially, a quality oil for rotary engines is paramount. Refer to manual for precise viscosity recommendations based on climate.
Coolant:
Mazda FL22 Long Life Coolant (or equivalent ethylene glycol-based antifreeze with silicate inhibitors), mixed 50/50 with distilled water.
Transmission Fluid:
GL-4 or GL-5 gear oil (specific weight depends on transmission and ambient temperature, typically 75W-90). Consult manual for exact specifications and capacity.
Differential Fluid:
GL-5 gear oil, SAE 80W-90 or 75W-90. Consult manual for exact specifications and capacity.
Brake Fluid:
DOT 3 or DOT 4 brake fluid (low-viscosity type).
Power Steering Fluid:
Dexron-III automatic transmission fluid (ATF) or equivalent power steering fluid.
Known Issues
Apex Seal Wear:
A well-documented concern in all rotary engines. Regular maintenance, proper warm-up/cool-down procedures, and avoiding detonation are critical. Rebuilds are a potential necessity at higher mileage.
Oil Consumption:
Rotary engines inherently consume some oil, but excessive consumption can indicate seal wear or other issues.
Cooling System Maintenance:
Overheating can be catastrophic. Regular checks of coolant level, radiator condition, and fan operation are vital.
Turbocharger Reliability:
While robust, turbochargers are complex. Proper oil changes and avoiding 'heat soak' are important for longevity.
Vacuum Lines And Emissions Components:
Age-related degradation of rubber hoses and plastic components in the emissions and vacuum systems can lead to performance issues.
📚 Vehicle History
Brand Heritage
Mazda Rotary Legacy:
Mazda's commitment to the rotary engine began with the Cosmo Sport in the late 1960s, establishing a unique niche in the automotive world. The RX-7 lineage, including the SA/FB and FC generations, built this reputation.
Model Evolution
Fd Generation Debut:
The third-generation RX-7 (FD) debuted in 1992, featuring a complete redesign focused on aerodynamics, handling, and performance, distinguishing itself with the advanced 13B-REW rotary engine.
Facelifts And Updates:
The 2000 model represents a later iteration of the FD RX-7, incorporating minor updates and refinements over the years, including improved cooling, suspension tuning, and updated electronics compared to earlier models.
Production
Production Period:
1992-2002
Manufacturing Plant:
Mazda's Hiroshima plant, Japan
Total Fd Production:
Approx. 68,589 units worldwide
🏆 Awards & Recognition
Recognitions
Car And Driver 10Best:
Named to Car and Driver's '10Best' list multiple times during its production run, particularly in its early years.
Motor Trend Import Car Of The Year:
While not specifically for the 2000 model, the FD generation was highly regarded by automotive journalists globally.
Ratings
Iconic Status:
Widely considered a 'modern classic' and one of the greatest Japanese sports cars ever produced.
Een selectie kiezen resulteert in het geheel verversen van de pagina.