Allis Chalmers D-12 & D-12 Series III Service Repair Manual
Normale prijs
$141.00
Aanbiedingsprijs
$141.00
Normale prijs
Eenheidsprijs
/ per
Aanbieding
Uitverkocht
🏷️ Basic Information Identification Make: Allis Chalmers Model: D-12 Model Variant: D-12 Series III 👋 Introduction Market Position Category: Agricultural Tractor Competitive Analysis Competitors: Competed with tractors from John Deere, Ford, Farmall (International Harvester), and Massey Ferguson in its class. Key Features Design Philosophy: Known for its robust construction, reliable performance, and versatility for farm and utility tasks. Operator Comfort: Featured an open operator station with a comfortable seating arrangement, and accessible controls for its era. Power Takeoff: Equipped with a standard PTO for operating various agricultural implements. Hydraulic Lift: Integrated hydraulic lift system for operating three-point hitch implements. 📋 Manual Details Coverage Areas Primary Coverage: Service and Repair Page Count Estimated Pages: Refer to specific product listing for exact page count (typical for this era of manuals is 300-600 pages) Manual Type Type: Service Repair Manual Language Language: English Format Format: PDF Download 📖 Manual Coverage Systems Covered Engine: Detailed information on engine overhaul, tuning, component identification, troubleshooting, and specifications for gasoline and diesel variants (if applicable). Fuel System: Carburetor adjustment and overhaul, fuel pump operation, fuel filter replacement, fuel line routing, and troubleshooting. Cooling System: Radiator, thermostat, water pump, fan, hoses, and coolant specifications. Overheating diagnosis and repair procedures. Ignition System: Spark plugs, ignition coil, distributor, timing adjustment, and troubleshooting of ignition system faults. Transmission: Clutch operation, gearbox overhaul, gear shifting mechanisms, lubrication, and troubleshooting for manual transmissions. Drive Axle: Rear axle assembly, differential, gears, lubrication, and maintenance procedures. Hydraulic System: Hydraulic pump, control valve, lift arms, cylinders, fluid specifications, and troubleshooting for implement hydraulics. Steering System: Steering gearbox, tie rods, linkages, lubrication, and adjustments for precise steering control. Braking System: Brake shoe adjustment, drum brake service, brake pedal, linkage, and troubleshooting for reliable stopping power. Electrical System: Wiring diagrams, generator/alternator, battery, starter motor, lighting system, and troubleshooting electrical faults. Chassis And Frame: Frame inspection, component mounting, and general chassis maintenance. Bodywork: Fender maintenance, operator platform, sheet metal repairs, and related component servicing. Procedures Included Maintenance: Routine maintenance checks, lubrication points, filter replacement, and fluid level checks with recommended intervals. Troubleshooting: Systematic diagnostic procedures for identifying and resolving common operational problems across all major systems. Repair: Step-by-step instructions for component removal, disassembly, inspection, repair, reassembly, and installation. Overhaul: Complete engine, transmission, and hydraulic system overhaul procedures, including detailed torque specifications and clearances. Adjustment: Precise adjustment procedures for clutch, brakes, ignition timing, carburetor, and hydraulic controls. Specifications: Comprehensive torque values, clearances, fluid capacities, pressure readings, and performance specifications. Technical Depth Depth: Comprehensive, covering basic maintenance to complete engine and transmission rebuilds, essential for professional mechanics and experienced owners. 📊 Manual Specifications File Format Format: PDF Print Quality Quality: High-resolution, ensuring readability of text, diagrams, and illustrations. Binding Type Type: N/A (Digital PDF format) Paper Type Type: N/A (Digital PDF format) ⚙️ Engine Specifications Primary Engine Model: Allis Chalmers 175 XD (Diesel) Configuration: Inline 3-cylinder, naturally aspirated diesel Displacement: Approximately 160 cubic inches (2.6 Liters) Bore X Stroke: Specifics available in manual (typical for this era: around 3.875" x 4.375") Horsepower Rated: Approximately 35-45 PTO horsepower (varies by specific configuration and source) Torque Peak: Specifics available in manual Performance Governor: Mechanical governor for precise engine speed control. Fuel System Injection System: Roos or Bosch injection pump (depending on specific engine build) Fuel Type: Diesel fuel Fuel Capacity: Refer to operator's manual or specific manual chapter (typically 10-15 gallons) 🔧 Transmission Standard Type: Manual transmission with a constant mesh gearbox Gear Selections: Typically 6 forward speeds and 2 reverse speeds. Features Clutch: Single-stage dry disc clutch. Differential Lock: Optional or standard differential lock for improved traction. 📐 Dimensions Exterior Length: Refer to specific manual chapter for exact dimensions (typically around 100-120 inches) Width: Refer to specific manual chapter for exact dimensions (variable based on tire size, typically 60-70 inches) Wheelbase: Refer to specific manual chapter for exact dimensions (typically around 70-80 inches) Weights Operating Weight: Approximately 3,500 - 4,500 lbs (refer to specific manual for exact weight) Front Axle Weight: Specifics available in manual Rear Axle Weight: Specifics available in manual 🛡️ Safety Features Ratings Era Standard: Safety features aligned with agricultural machinery standards of the 1960s-1970s, emphasizing operator protection through guarding and ROPS (Roll Over Protection Structure) if retrofitted or as an option. Active Features Braking System: Foot-operated mechanical drum brakes, providing essential stopping power. Passive Features Operator Station: Open station with a padded seat and basic shielding. Roll bars or ROPS were often optional or dealer-installed for later models. Guarding: Guards for PTO, driveshafts, and other rotating components to prevent entanglement. 💡 Technology Features Infotainment Features: No modern infotainment systems; instrumentation typically includes a tachometer, temperature gauge, oil pressure light, and ammeter. Driver Assistance Features: Basic operator aids such as power steering (if equipped) and differential lock for improved maneuverability and traction. 🔧 Maintenance Service Intervals Engine Oil Change:...
Competed with tractors from John Deere, Ford, Farmall (International Harvester), and Massey Ferguson in its class.
Key Features
Design Philosophy:
Known for its robust construction, reliable performance, and versatility for farm and utility tasks.
Operator Comfort:
Featured an open operator station with a comfortable seating arrangement, and accessible controls for its era.
Power Takeoff:
Equipped with a standard PTO for operating various agricultural implements.
Hydraulic Lift:
Integrated hydraulic lift system for operating three-point hitch implements.
📋 Manual Details
Coverage Areas
Primary Coverage:
Service and Repair
Page Count
Estimated Pages:
Refer to specific product listing for exact page count (typical for this era of manuals is 300-600 pages)
Manual Type
Type:
Service Repair Manual
Language
Language:
English
Format
Format:
PDF Download
📖 Manual Coverage
Systems Covered
Engine:
Detailed information on engine overhaul, tuning, component identification, troubleshooting, and specifications for gasoline and diesel variants (if applicable).
Fuel System:
Carburetor adjustment and overhaul, fuel pump operation, fuel filter replacement, fuel line routing, and troubleshooting.
Cooling System:
Radiator, thermostat, water pump, fan, hoses, and coolant specifications. Overheating diagnosis and repair procedures.
Ignition System:
Spark plugs, ignition coil, distributor, timing adjustment, and troubleshooting of ignition system faults.
Transmission:
Clutch operation, gearbox overhaul, gear shifting mechanisms, lubrication, and troubleshooting for manual transmissions.
Drive Axle:
Rear axle assembly, differential, gears, lubrication, and maintenance procedures.
Hydraulic System:
Hydraulic pump, control valve, lift arms, cylinders, fluid specifications, and troubleshooting for implement hydraulics.
Steering System:
Steering gearbox, tie rods, linkages, lubrication, and adjustments for precise steering control.
Braking System:
Brake shoe adjustment, drum brake service, brake pedal, linkage, and troubleshooting for reliable stopping power.
Comprehensive, covering basic maintenance to complete engine and transmission rebuilds, essential for professional mechanics and experienced owners.
📊 Manual Specifications
File Format
Format:
PDF
Print Quality
Quality:
High-resolution, ensuring readability of text, diagrams, and illustrations.
Binding Type
Type:
N/A (Digital PDF format)
Paper Type
Type:
N/A (Digital PDF format)
⚙️ Engine Specifications
Primary Engine
Model:
Allis Chalmers 175 XD (Diesel)
Configuration:
Inline 3-cylinder, naturally aspirated diesel
Displacement:
Approximately 160 cubic inches (2.6 Liters)
Bore X Stroke:
Specifics available in manual (typical for this era: around 3.875" x 4.375")
Horsepower Rated:
Approximately 35-45 PTO horsepower (varies by specific configuration and source)
Torque Peak:
Specifics available in manual
Performance
Governor:
Mechanical governor for precise engine speed control.
Fuel System
Injection System:
Roos or Bosch injection pump (depending on specific engine build)
Fuel Type:
Diesel fuel
Fuel Capacity:
Refer to operator's manual or specific manual chapter (typically 10-15 gallons)
🔧 Transmission
Standard
Type:
Manual transmission with a constant mesh gearbox
Gear Selections:
Typically 6 forward speeds and 2 reverse speeds.
Features
Clutch:
Single-stage dry disc clutch.
Differential Lock:
Optional or standard differential lock for improved traction.
📐 Dimensions
Exterior
Length:
Refer to specific manual chapter for exact dimensions (typically around 100-120 inches)
Width:
Refer to specific manual chapter for exact dimensions (variable based on tire size, typically 60-70 inches)
Wheelbase:
Refer to specific manual chapter for exact dimensions (typically around 70-80 inches)
Weights
Operating Weight:
Approximately 3,500 - 4,500 lbs (refer to specific manual for exact weight)
Front Axle Weight:
Specifics available in manual
Rear Axle Weight:
Specifics available in manual
🛡️ Safety Features
Ratings
Era Standard:
Safety features aligned with agricultural machinery standards of the 1960s-1970s, emphasizing operator protection through guarding and ROPS (Roll Over Protection Structure) if retrofitted or as an option.
Open station with a padded seat and basic shielding. Roll bars or ROPS were often optional or dealer-installed for later models.
Guarding:
Guards for PTO, driveshafts, and other rotating components to prevent entanglement.
💡 Technology Features
Infotainment
Features:
No modern infotainment systems; instrumentation typically includes a tachometer, temperature gauge, oil pressure light, and ammeter.
Driver Assistance
Features:
Basic operator aids such as power steering (if equipped) and differential lock for improved maneuverability and traction.
🔧 Maintenance
Service Intervals
Engine Oil Change:
Typically every 100-200 operating hours or annually. Refer to manual for exact interval and oil specification.
Oil Filter Change:
Change with every engine oil change.
Air Filter Cleaning:
Check and clean at frequent intervals, especially in dusty conditions; replace as needed.
Fuel Filter Replacement:
As per manual recommendations, typically every 250-500 hours or when issues arise.
Transmission Fluid Change:
Refer to manual for specific interval and fluid type, often at higher hour intervals.
Hydraulic Fluid Change:
Refer to manual for specific interval and fluid type, often annually or every 500-1000 hours.
Fluid Specifications
Engine Oil:
Refer to manual for SAE viscosity grade (e.g., SAE 30 or SAE 10W-30 depending on climate) and API service classification. Diesel specific oil is recommended.
Coolant:
Ethylene glycol based antifreeze and water mixture (50/50 recommended). Specific anti-corrosion additives may be required; consult manual.
Transmission Hydraulic Fluid:
Typically a specific tractor hydraulic fluid (THF) or equivalent meeting manufacturer specifications. Manual will specify grade and part numbers if available.
Known Issues
Engine Wear:
Typical wear on valve seats, piston rings, and bearings in high-hour engines. Potential for injector pump wear.
Hydraulic Leaks:
Common leaks from seals in the hydraulic pump, control valve, and cylinders due to age and usage.
Clutch Slippage:
Clutch disc wear can lead to slippage, requiring adjustment or replacement.
Electrical Oxidation:
Corrosion and oxidation on electrical connections, switch contacts, and wiring loom can cause intermittent faults.
Carburetor Issues:
For gasoline variants, gummy deposits in carburetors and fuel lines are common with long-term storage.
📚 Vehicle History
Brand Heritage
Company Origin:
Allis-Chalmers was an American manufacturer of machinery and equipment, renowned for its agricultural and industrial products.
Model Evolution
Development:
The D-12 was part of Allis-Chalmers' popular 'D' series of tractors, designed to meet the evolving needs of small to medium-sized farms.
Series Iii Updates:
Series III likely introduced refinements in engine performance, transmission, and potentially hydraulic system improvements over earlier D-12 models.
Production
Production Years:
D-12 production spanned from the late 1950s into the 1960s. Series III would be towards the latter end of this range.
Manufacturing Location:
Primarily manufactured in the United States.
🏆 Awards & Recognition
Recognitions
Reputation:
The Allis-Chalmers D-12 is recognized by collectors and users as a durable and dependable utility tractor of its era.
Een selectie kiezen resulteert in het geheel verversen van de pagina.