Turbocharger inspection, seal replacement, wastegate adjustment
Troubleshooting Guides:
Diagnostic flowcharts for common problems (e.g., engine misfire, poor performance, starting issues)
Lubrication System Service:
Oil pump inspection, oil cooler service, apex seal lubrication specific procedures
Technical Depth
Depth:
Full mechanical and electrical system repair, including diagnostics and component-level troubleshooting, suitable for professional mechanics and experienced DIY enthusiasts.
📊 Manual Specifications
File Format
File Type:
PDF
Searchable Text:
Yes
Printable:
Yes
Resolution:
High-resolution scans/digital creation for clarity
Binding Type
Binding:
N/A (Digital Download)
Paper Type
Paper Quality:
N/A (Digital Download)
⚙️ Engine Specifications
Primary Engine
Engine Code:
13B
Engine Configuration:
Two-Rotor Wankel Rotary
Displacement Cc:
1308
Displacement Ci:
80
Performance
Horsepower Hp:
182
Horsepower Kw:
136
Torque Lb Ft:
183
Torque Nm:
248
Redline Rpm:
7500
Fuel System
Fuel Delivery:
Electronic Fuel Injection (EFI)
Fuel Type:
Unleaded Gasoline (Premium Recommended)
Ignition System
Ignition Type:
Distributorless Ignition System (DIS) with twin ignition coils per rotor
🔧 Transmission
Standard
Type:
5-Speed Manual (FS5W71C)
Optional
Type:
4-Speed Automatic
Features
Drive:
Rear-Wheel Drive (RWD)
📐 Dimensions
Exterior
Length Mm:
4375
Width Mm:
1715
Height Mm:
1295
Wheelbase Mm:
2500
Weights
Curb Weight Kg:
1320
🛡️ Safety Features
Ratings
NHTSA Frontal Impact:
Not rated (era specific)
IIHS Side Impact:
Not rated (era specific)
Active Features
ABS:
Anti-lock Braking System (ABS) available on some models/trims
Passive Features
Airbags:
Driver's side airbag (standard on most models)
Seatbelts:
3-point inertia-reel seatbelts
💡 Technology Features
Infotainment
Audio System:
Factory AM/FM stereo cassette player with optional CD player integration on later models.
Climate Control:
Manual climate control with optional automatic climate control on higher trims.
Driver Assistance
ABS:
Available Anti-lock Braking System for enhanced braking control.
Cruise Control:
Standard cruise control for highway driving.
Connectivity
Original Connectivity:
No integrated Bluetooth or smartphone connectivity; aftermarket solutions are common.
🔧 Maintenance
Service Intervals
Oil Change:
Every 3,000-5,000 miles or 3-6 months, depending on driving conditions. Consult manual for specific rotary oil recommendations.
Air Filter:
Inspect every 15,000 miles, replace as needed or every 30,000 miles.
Spark Plugs:
Platinum-tipped plugs recommended, replace every 30,000-60,000 miles. Specific rotary plug types are crucial.
Coolant Flush:
Every 2-3 years or 30,000-50,000 miles.
Fluid Specifications
Engine Oil:
API SG/SH or higher, Viscosity SAE 10W-30 or 10W-40 recommended (check manual for specific rotary engine oil requirements, often a specific blend is advised).
Transmission Fluid Manual:
API GL-4 or GL-5, SAE 75W-90 or 80W-90 gear oil.
Transmission Fluid Automatic:
Dexron II or equivalent.
Brake Fluid:
DOT 3 or DOT 4.
Coolant:
Ethylene Glycol based, 50/50 mix with distilled water.
Power Steering Fluid:
ATF Dexron II or equivalent.
Known Issues
Apex Seals:
Wear and failure of apex seals is a common concern with high-mileage rotary engines, leading to compression loss and poor performance. Regular oil changes and proper engine warm-up are crucial.
Oil Consumption:
Rotary engines inherently consume a small amount of oil, which is injected into the combustion chamber to lubricate seals. However, excessive consumption can indicate seal wear.
Turbo System:
Oil leaks, wastegate issues, and turbocharger bearing wear can occur with age and mileage.
Engine Mounts:
Rubber engine mounts can degrade over time, leading to increased vibration.
📚 Vehicle History
Brand Heritage
Mazda Rotary Development:
Mazda's long history and commitment to rotary engine technology, starting with the Cosmo.
Model Evolution
Rx7 Generations:
The FC generation (1985-1992) followed the SA22C/FB generation and preceded the FD generation. This generation marked a significant evolution in styling, performance, and technology.
Fc Facelift:
The 1989 model year represents the updated FC, often referred to as Series 5 in Japan, but the 'S4 Turbocharged 13B' designation likely refers to the Series 4 Turbocharged variant common in export markets.
Production
Production Years:
1985-1992 (FC Generation)
Manufacturing Location:
Japan
🏆 Awards & Recognition
Recognitions
Car And Driver Ten Best:
The RX-7 (FC generation) was named to Car and Driver's Ten Best list multiple times in the late 1980s.
Motor Trend Import Car Of The Year:
While not specifically awarded for the 1989 model year, the FC generation contributed to Mazda's growing reputation in performance automotive journalism.
Een selectie kiezen resulteert in het geheel verversen van de pagina.