Renault 5 Superfive 1985-1996 Service Repair Workshop Manual
Normale prijs
$133.00
Aanbiedingsprijs
$133.00
Normale prijs
Eenheidsprijs
/ per
Aanbieding
Uitverkocht
🏷️ Basic Information Identification Make: Renault Model: 5 Supercinq Codename: R9 / R11 platform based Body Style: 3-door and 5-door hatchback Generation Generation Code: B40 Codes Chassis Code: B40 👋 Introduction Market Position Target Audience: DIY mechanics, independent repair shops, car enthusiasts, owners seeking informed communication with technicians Competitive Analysis Value Proposition: Provides dealer-level repair information at a fraction of the cost of dealership labor, enabling significant cost savings on maintenance and repairs. Key Features Content Type: Vehicle-specific, not generic; includes step-by-step instructions, diagrams, illustrations, wiring schematics, and specifications. Manual Origin: Corresponds to the same information used by authorized dealer service departments. Accessibility: Viewable on PC, Mac, and various mobile/e-reader devices; printable pages for garage use. 📋 Manual Details Coverage Areas Applicable Years: 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996 Region Coverage: Global (primarily European market focused) Page Count Estimated Page Count: Likely over 500 pages (typical for comprehensive workshop manuals) Manual Type Manual Type: Service Repair Workshop Manual Language Language: English Format Digital Format: PDF 📖 Manual Coverage Systems Covered Engine Mechanical: Engine overhaul, cylinder head, block, pistons, crankshaft, camshafts, timing, lubrication system, cooling system Engine Electrical: Ignition system, starter motor, alternator, battery, sensors, engine control unit (ECU) diagnostics Emission Control: Exhaust systems, catalytic converters, emissions regulations compliance, evaporative emission control Fuel System: Fuel injection (TBI, MPI), carburetors, fuel pump, fuel filter, fuel lines, fuel tank, pressure regulation Clutch System: Clutch operation, hydraulic system, clutch disc, pressure plate, release bearing, clutch pedal adjustment Transmission: Manual transaxle (gearbox) overhaul, clutch operation, gear selection, bearings, seals; Automatic transaxle (if applicable) operation and service Driveshaft Axle: Front-wheel drive axles, CV joints, hub bearings, differential service Suspension: Front suspension (MacPherson struts), rear suspension (torsion beam/coil springs), shock absorbers, springs, control arms, bushings, alignment specifications Steering: Steering rack, tie rod ends, power steering system (if equipped), steering column, wheel alignment Brakes: Front disc brakes, rear drum brakes (typical), hydraulic system, brake lines, master cylinder, calipers, wheel cylinders, brake fluid specifications, bleeding procedures Body Interior Exterior: Body panel removal/installation, door mechanisms, glass, seals, interior trim, seats, dashboard, bumpers, moldings Body Electrical: Lighting system, wipers, washers, horn, door locks, power windows (if equipped), dashboard instruments, fuse box layout, wiring harnesses HVAC: Heating system, ventilation, blower motor, control mechanisms, refrigerant system (if equipped with A/C) Restraint Systems: Seat belts, pre-tensioners (if applicable), airbag system (if applicable) inspection and replacement procedures Procedures Included Maintenance: Routine oil changes, filter replacements, spark plug service, fluid checks and top-offs, belt inspections and replacement Diagnostics Troubleshooting: Step-by-step diagnostic procedures for various systems, fault code interpretation (if applicable), symptom-based troubleshooting guides Repair Rebuild: Detailed instructions for component removal, repair, overhaul, and reinstallation for all major vehicle systems Electrical Schematics: Comprehensive wiring diagrams for all vehicle electrical systems, component locations, and circuit tracing Technical Depth Depth Of Coverage: Complete workshop level: Covers everything from basic maintenance to complete engine and transmission rebuilds, detailed diagnostics, and bodywork. 📊 Manual Specifications File Format File Type: PDF Readability: Searchable text (typical for professionally scanned manuals) Print Quality Printability: Yes, all pages are printable Binding Type Binding: N/A (Digital PDF) Paper Type Paper Quality: N/A (Digital PDF) Compatibility Operating Systems: Windows and macOS Requirements Software Requirements: Adobe PDF Reader ⚙️ Engine Specifications Primary Engine Engine Codes Typical: E7F, C2J, E6J, C1J (depending on market and model variant) Engine Displacement Displacement Range: 1.1L to 1.7L (1108cc to 1721cc) Performance Horsepower Range: Approx. 42 hp to 95 hp (depending on engine and tuning) Torque Range: Approx. 75 Nm to 130 Nm Fuel System Induction Type: Carburetor (e.g., Solex, Weber) or Fuel Injection (e.g., Single-point or Multi-point) Fuel Type Fuel Type: Unleaded gasoline Cooling System Cooling Method: Liquid-cooled 🔧 Transmission Standard Transmission Type Std: 5-speed manual transaxle Optional Transmission Type Opt: 3-speed automatic transaxle (less common) Features Drive Layout: Front-wheel drive (FWD) Clutch Type: Dry, single-plate, diaphragm spring clutch 📐 Dimensions Exterior Length: Approx. 3620 - 3630 mm Width: Approx. 1590 - 1600 mm Height: Approx. 1390 - 1400 mm Weights Curb Weight: Approx. 800 - 950 kg Gross Vehicle Weight: Varies by model, typically around 1300 kg Wheelbase Wheelbase: Approx. 2370 mm Track Width Front Track: Approx. 1330 mm Rear Track: Approx. 1320 mm 🛡️ Safety Features Ratings Crash Test Results: Older vehicle design, safety standards of the era. Manual would detail occupant protection systems available. Active Features Active Safety: Brake system (disc/drum), steering system. Passive Features Passive Safety: Seat belts, reinforced safety cage, crumple zones (designed to era standards). 💡 Technology Features Infotainment Audio System: Basic AM/FM radio, cassette player (optional upgrades available). Driver Assistance Driver Assistance Features: Limited by era. Primarily focused on basic vehicle dynamics and braking. Connectivity Connectivity Features: None by modern standards. 🔧 Maintenance Service Intervals Oil Change Interval: Typically every 7,500 - 10,000 km or 12 months, refer to...
Body panel removal/installation, door mechanisms, glass, seals, interior trim, seats, dashboard, bumpers, moldings
Body Electrical:
Lighting system, wipers, washers, horn, door locks, power windows (if equipped), dashboard instruments, fuse box layout, wiring harnesses
HVAC:
Heating system, ventilation, blower motor, control mechanisms, refrigerant system (if equipped with A/C)
Restraint Systems:
Seat belts, pre-tensioners (if applicable), airbag system (if applicable) inspection and replacement procedures
Procedures Included
Maintenance:
Routine oil changes, filter replacements, spark plug service, fluid checks and top-offs, belt inspections and replacement
Diagnostics Troubleshooting:
Step-by-step diagnostic procedures for various systems, fault code interpretation (if applicable), symptom-based troubleshooting guides
Repair Rebuild:
Detailed instructions for component removal, repair, overhaul, and reinstallation for all major vehicle systems
Electrical Schematics:
Comprehensive wiring diagrams for all vehicle electrical systems, component locations, and circuit tracing
Technical Depth
Depth Of Coverage:
Complete workshop level: Covers everything from basic maintenance to complete engine and transmission rebuilds, detailed diagnostics, and bodywork.
📊 Manual Specifications
File Format
File Type:
PDF
Readability:
Searchable text (typical for professionally scanned manuals)
Print Quality
Printability:
Yes, all pages are printable
Binding Type
Binding:
N/A (Digital PDF)
Paper Type
Paper Quality:
N/A (Digital PDF)
Compatibility
Operating Systems:
Windows and macOS
Requirements
Software Requirements:
Adobe PDF Reader
⚙️ Engine Specifications
Primary Engine
Engine Codes Typical:
E7F, C2J, E6J, C1J (depending on market and model variant)
Engine Displacement
Displacement Range:
1.1L to 1.7L (1108cc to 1721cc)
Performance
Horsepower Range:
Approx. 42 hp to 95 hp (depending on engine and tuning)
Torque Range:
Approx. 75 Nm to 130 Nm
Fuel System
Induction Type:
Carburetor (e.g., Solex, Weber) or Fuel Injection (e.g., Single-point or Multi-point)
Fuel Type
Fuel Type:
Unleaded gasoline
Cooling System
Cooling Method:
Liquid-cooled
🔧 Transmission
Standard
Transmission Type Std:
5-speed manual transaxle
Optional
Transmission Type Opt:
3-speed automatic transaxle (less common)
Features
Drive Layout:
Front-wheel drive (FWD)
Clutch Type:
Dry, single-plate, diaphragm spring clutch
📐 Dimensions
Exterior
Length:
Approx. 3620 - 3630 mm
Width:
Approx. 1590 - 1600 mm
Height:
Approx. 1390 - 1400 mm
Weights
Curb Weight:
Approx. 800 - 950 kg
Gross Vehicle Weight:
Varies by model, typically around 1300 kg
Wheelbase
Wheelbase:
Approx. 2370 mm
Track Width
Front Track:
Approx. 1330 mm
Rear Track:
Approx. 1320 mm
🛡️ Safety Features
Ratings
Crash Test Results:
Older vehicle design, safety standards of the era. Manual would detail occupant protection systems available.
Active Features
Active Safety:
Brake system (disc/drum), steering system.
Passive Features
Passive Safety:
Seat belts, reinforced safety cage, crumple zones (designed to era standards).
💡 Technology Features
Infotainment
Audio System:
Basic AM/FM radio, cassette player (optional upgrades available).
Driver Assistance
Driver Assistance Features:
Limited by era. Primarily focused on basic vehicle dynamics and braking.
Connectivity
Connectivity Features:
None by modern standards.
🔧 Maintenance
Service Intervals
Oil Change Interval:
Typically every 7,500 - 10,000 km or 12 months, refer to manual for specific engine.
Air Filter Replacement:
Every 20,000 - 30,000 km or as needed based on driving conditions.
Spark Plug Replacement:
Typically every 30,000 - 50,000 km depending on spark plug type.
Fluid Specifications
Engine Oil Type:
API SG/SH or ACEA A2/A3, viscosity typically 10W-40 or 5W-40 (refer to manual for specific recommendations based on climate).
Coolant Type:
Ethylene glycol based coolant, typically a 50/50 mix with distilled water.
Brake Fluid Type:
DOT 3 or DOT 4, depending on vehicle specification.
Transmission Fluid Manual:
API GL-4, SAE 75W-80 or 75W-90 gear oil.
Transmission Fluid Automatic:
ATF Dexron II or equivalent.
Known Issues
Common Faults:
Carburetor issues, ignition system component failures (coils, distributors), rust on body and chassis, suspension wear (bushings, ball joints), early ECU failures on fuel injected models.
📚 Vehicle History
Brand Heritage
Manufacturer Origin:
France
Model Evolution
Predecessor:
Renault 5 (R5)
Successor:
Renault Clio I
Production
Production Period:
1984-1996
Manufacturing Locations:
France, Spain, Slovenia, and other Renault assembly plants globally
Sales Volume Global:
Millions of units produced worldwide
🏆 Awards & Recognition
Recognitions
Market Impact:
Highly successful model for Renault, known for its practicality, affordability, and distinctive design. Awarded 'Car of the Year' by some publications in its early years.
Een selectie kiezen resulteert in het geheel verversen van de pagina.