🏷️ Basic Information Identification Make: Ford Model: Falcon Generation: BA Year: 2003 Codes Chassis Code: BA 👋 Introduction Market Position Target Audience: Enthusiast owners, DIY mechanics, independent repair shops. Competitive Analysis Value Proposition: Provides in-depth technical knowledge comparable to factory service manuals at a potentially lower cost and with instant accessibility. Key Features Content Source: Technical details directly from the manufacturer. Illustrations: Includes pictures and diagrams for clarity in assembly and disassembly procedures. Download Method: Instant download for immediate access. Support: Offers support if desired information is not found. 📋 Manual Details Coverage Areas Geographical Coverage: Primarily Australia, with potential relevance to markets with similar Ford platforms. Page Count Estimated Page Count: Likely 1000+ pages (typical for comprehensive service manuals of this era). Manual Type Type: Service and Repair Manual Language Language: English Format Format: Digital Download (PDF) 📖 Manual Coverage Systems Covered Powertrain: Engine mechanical, fuel system, ignition system, exhaust system, cooling system, lubrication system. Transmission: Manual and Automatic transmission service, repair, and diagnostics. Drivetrain: Driveshafts, differentials, axles, wheel bearings. Suspension: Front and rear suspension systems, shock absorbers, springs, control arms, bushings. Steering: Power steering system, steering rack, tie rods, steering column. Brakes: Front and rear brake systems (disc and drum where applicable), ABS, brake lines, master cylinder, calipers, pads, rotors. Electrical: Battery, charging system, starting system, lighting, instrumentation, wiring diagrams, fuses, relays. Body And Chassis: Body panels, doors, windows, interior trim, chassis components, structural repair. HVAC: Heating, ventilation, and air conditioning system. Safety Systems: Airbag systems (SRS), seatbelts, potential mention of early driver assistance systems if equipped. Procedures Included Routine Maintenance: Oil changes, filter replacements, fluid checks and changes, spark plug replacement, belt inspection and replacement. Troubleshooting: Diagnostic procedures, symptom-based troubleshooting guides, fault code interpretation. Component Repair: Detailed step-by-step instructions for disassembly, cleaning, inspection, repair, and reassembly of various components. System Diagnostics: Procedures for diagnosing issues within engine, transmission, braking, electrical, and other vehicle systems. Adjustment And Calibration: Procedures for adjusting clutch, brakes, and other systems as required. Electrical Component Replacement: Instructions for replacing alternators, starters, batteries, sensors, ECUs, etc. Body And Interior Repair: Procedures for body panel replacement, minor collision repair, interior trim removal and installation. Specifications And Tolerances: Torque specifications for fasteners, clearance measurements, and other critical tolerances. Technical Depth Depth: Comprehensive, covering everything from basic maintenance to major component overhauls and advanced diagnostics. Diagnostics Level: Advanced diagnostics, including wiring diagrams and likely OE scan tool information. Repair Level: Full repair procedures, including component disassembly, rebuilding, and reassembly. 📊 Manual Specifications File Format File Format: PDF (Portable Document Format) Print Quality Printability: Printable sections/pages available for user convenience. Binding Type Binding Type: N/A (Digital format) Paper Type Paper Type: N/A (Digital format) Searchability Text Searchability: Assumed searchable text within the PDF. ⚙️ Engine Specifications Primary Engine Engine Options: Likely covers Barra ECE (Eco-4), Barra EOL (Economy V6), Barra E-Gas (LPG), Barra 220 (performance V8), and Barra 230 (performance V8). Engine Architecture: Inline-6 (I6) and V8 configurations. Displacement I6: 4.0 Litres (3984 cc) Displacement V8: 5.4 Litres (5408 cc) Fuel System: Electronic Fuel Injection (EFI), Multi-Point Fuel Injection (MPFI). Ignition System: Distributorless Ignition System (DIS), Coil-on-plug (COP) ignition. Performance Power Output I6 Base: Approx. 157 kW (211 hp) @ 5000 rpm (non-supercharged) Torque Output I6 Base: Approx. 370 Nm (273 lb-ft) @ 3000 rpm (non-supercharged) Power Output V8: Approx. 220 kW (295 hp) @ 5000 rpm (non-supercharged) Torque Output V8: Approx. 470 Nm (347 lb-ft) @ 3250 rpm (non-supercharged) 🔧 Transmission Standard Manual Transmission: Available, likely a T5 or similar 5-speed manual. Optional Automatic Transmission: Available, likely a 4-speed (4HP24/4R70W based) or 5-speed automatic transmission (e.g., 5R50W). Features Transmission Control: Electronic control for automatic transmissions. 📐 Dimensions Exterior Body Styles: Sedan, Wagon, Ute (Utility Vehicle). Wheelbase: Approximately 2829 mm (111.4 inches). Weights Curb Weight: Varies by model and configuration, generally ranging from 1500 kg to 1800 kg. 🛡️ Safety Features Ratings Ancap Rating: Likely achieved a 4-star ANCAP safety rating for earlier models, potentially improved with later updates. Specific rating depends on configuration. Active Features ABS: Anti-lock Braking System (ABS) available on most models. Ebd: Electronic Brakeforce Distribution (EBD) often paired with ABS. Passive Features Airbags: Front airbags standard. Side airbags optional on some trims. Seatbelts: Three-point seatbelts with pre-tensioners. 💡 Technology Features Infotainment Audio System: Factory fitted AM/FM/CD audio systems, potentially with cassette player in base models. Higher trims may have premium sound systems. Driver Assistance Cruise Control: Standard on most models. Parking Sensors: Optional on higher trim levels or as a dealer-fitted accessory. Connectivity Auxiliary Input: Unlikely to have standard auxiliary input or USB ports; Bluetooth connectivity was rare or aftermarket in 2003. 🔧 Maintenance Service Intervals Oil Change Interval: Typically 10,000-15,000 km or 6-12 months, whichever comes first, depending on driving conditions. Air Filter Replacement: Recommended every 20,000-30,000 km or as needed based on...
Available, likely a 4-speed (4HP24/4R70W based) or 5-speed automatic transmission (e.g., 5R50W).
Features
Transmission Control:
Electronic control for automatic transmissions.
📐 Dimensions
Exterior
Body Styles:
Sedan, Wagon, Ute (Utility Vehicle).
Wheelbase:
Approximately 2829 mm (111.4 inches).
Weights
Curb Weight:
Varies by model and configuration, generally ranging from 1500 kg to 1800 kg.
🛡️ Safety Features
Ratings
Ancap Rating:
Likely achieved a 4-star ANCAP safety rating for earlier models, potentially improved with later updates. Specific rating depends on configuration.
Active Features
ABS:
Anti-lock Braking System (ABS) available on most models.
Ebd:
Electronic Brakeforce Distribution (EBD) often paired with ABS.
Passive Features
Airbags:
Front airbags standard. Side airbags optional on some trims.
Seatbelts:
Three-point seatbelts with pre-tensioners.
💡 Technology Features
Infotainment
Audio System:
Factory fitted AM/FM/CD audio systems, potentially with cassette player in base models. Higher trims may have premium sound systems.
Driver Assistance
Cruise Control:
Standard on most models.
Parking Sensors:
Optional on higher trim levels or as a dealer-fitted accessory.
Connectivity
Auxiliary Input:
Unlikely to have standard auxiliary input or USB ports; Bluetooth connectivity was rare or aftermarket in 2003.
🔧 Maintenance
Service Intervals
Oil Change Interval:
Typically 10,000-15,000 km or 6-12 months, whichever comes first, depending on driving conditions.
Air Filter Replacement:
Recommended every 20,000-30,000 km or as needed based on inspection.
Spark Plug Replacement I6:
Typically around 100,000 km for standard spark plugs, iridium may extend this.
Transmission Fluid Change:
Recommended every 60,000-80,000 km for automatic transmissions, manual is often less frequent.
Fluid Specifications
Engine Oil Type I6:
Likely SAE 10W-30 or 10W-40, meeting Ford specifications (e.g., WSS-M2C913-A/B or equivalent).
Engine Oil Type V8:
Likely SAE 5W-30 or 10W-30, meeting Ford specifications (e.g., WSS-M2C153-E or equivalent).
Coolant Type:
Ethylene glycol based coolant, typically a green or orange type, meeting Ford specifications.
Brake Fluid Type:
DOT 3 or DOT 4 brake fluid.
Power Steering Fluid:
Specific Ford-approved power steering fluid or ATF Dexron III/Mercon compatible fluid.
Known Issues
Common Wear Items:
Bushings (suspension and sway bar), front control arms, ignition coils (especially on V8), exhaust manifold leaks (on some V8s).
Transmission Issues:
Potential for torque converter shudder or internal wear in older automatic transmissions with high mileage.
📚 Vehicle History
Brand Heritage
Ford Australia:
Ford Australia has a long and successful history of manufacturing and marketing the Falcon.
Model Evolution
Falcon Legacy:
The BA Falcon marked a significant redesign and modernization of the Falcon platform, building on decades of local engineering.
Production
Manufacturing Location:
Australia (Broadmeadows, Victoria).
🏆 Awards & Recognition
Recognitions
Australian Car Of The Year:
The BA Falcon platform was generally well-received by motoring journalists and was a strong contender in its class, though specific 'Car of the Year' awards for the 2003 model year would need verification for major publications.
Choosing a selection results in a full page refresh.