Original Illustrated Factory Operating Instructions (User Manual) for Linde Electric Tractor Type 127.

Original factory manuals for Linde Forklift Trucks, contains high quality images, circuit diagrams and instructions to help you to operate and repair your truck

Covered models:
P250
W20

Format: PDF, 92 Pages
Language: English

Contents:

Description
Approved applications
Technical note
Tractor takeover
Type plates (P 250)
Type plates (W 20)
Technical data (P 250)
Technical data (W 20)
Technical description
Introduction
Operators compartment and controls
Chassis
Drive and transmission
Electrical system
Steering
Lighting
Brakes
General view of tractor (P 250)
General view of tractor (W 20)
Operating controls and indicators
Driver's display
Multi purpose display
Hour meter
Odometer
Speedometer
Battery discharge indicator
Over temperature indicator
Brake fluid level indicator
Steering fluid level indicator
Parking brake warning
Warning indicator
Interlock warning indicator
Slow speed indicator
Main beam indicator
Travel direction indicator
Over-speed alarm
Turn signal repeaters
Before operation
Safety rules
Safety information
Report of Thorough Examination
Noise emission levels
Frequency characteristic for human body vibrations
Running-in instructions
Checks prior to initial operation of the tractor
Daily checks
Raising the battery cover (P 250)
Raising the motor cover (P 250)
Removing the battery cover (W 20)
Removing the motor cover (W 20)
Checking state of battery charge
Charging the battery
Connecting the battery to a charger
Opportunity charging
Check the battery condition, electrolyte
level and specific gravity
Removing the battery
Removing the battery using a hand pallet truck (W 20)
Controls and their operation
Interlock switches
Driver's seat adjustments
Passenger's seat adjustments
Steering wheel adjustment
Top up the Diesel heater fuel tank
Check tyre inflation (if applicable)
Check automatic towing coupling
Operation
Starting up
Speed selection
Travel in forward direction
Travel in reverse direction
Changing direction of travel
Starting on an incline
Before leaving the tractor
Regenerative brake
Footbrake
Parking brake
Engaging the parking brake
Releasing the parking brake
Emergency isolation
Steering
Turning radius
Road lights
Hazard warning lights
Brake lights
Reversing light
Direction indicators
Operating the horn
Windscreen wipe/wash
Remote inching button operation
Heater
Rear wash/wipe
Remote inching
Beacon
Heated seat
Fog lamp
Working lamps
Diesel Heater
Turning the Diesel heater on
Turning the Diesel heater off
Interior light
Battery voltage fuse boxes
Battery voltage fuses
Lighting fuses
Trailer towing guidelines
Towing capacity example (P 250)
Coupling and uncoupling a trailer (multi-position coupling)
Coupling and uncoupling a trailer (automatic coupling)
Coupling and uncoupling a trailer (remote coupling with traction interlock)
Towing a trailer .
Loading the platform .
Towing procedure.
Slinging the tractor .
Jacking positions.
Driver code entry .
Logging on.
Logging off .
Accessing supervisor menus.
Changing the supervisor pin .
Disable/enable the tractor.
Adding/deleting operator pin numbers.
List operator pin numbers .
Set/reset learner operation.
Data Logger.
Removing the platform sides .
Lowering the platform sides .
Securing the PVC canopy .
Maintenance
Maintenance and safety guidelines .
General information.
Handling lubricants .
Lubrication intervals.
Avoiding accidents .
Safety guidelines .
Measures before taking the tractor out of
operation.
Putting the truck back into operation .
Inspection and maintenance schedule .
Inspection and maintenance as required
Clean the tractor .
Tighten the wheel fixings .
Check condition and pressure of the tyres .
Renew the steering fluid hoses .
Check front wheel alignment .
Adjust the handbrake .
Operate the Diesel heater .
1000 Hour inspection and maintenance Check and lubricate the automatic tow coupling .
Check and adjust the handbrake .
Lubricate the top and bottom steering swivel bearings.
Lubricate the steering linkage bearings .
Check the front brake pads for wear .
Check and lubricate all door and cover
latches and hinges.
Check the condition and security of motor and battery connectors and cables .
Check the steering fluid level .
Check the steering fluid hoses for damage .
Drain and refill the drive axle .
Check the suspension dampers for damage.
2000 Hour inspection and maintenance
Check the brake fluid level .
Clean the traction controller cooling fans and air ducts .
Check the Diesel heater fuel filter .
5000 Hour inspection and maintenance
Renew the steering fluid and filter .
Check the brake pipes for damage and corrosion.
Renew the steering fluid tank breather .
Renew the Diesel heater fuel filter .
Replace the accelerator return spring .
10000 Hour inspection and maintenance
Change the brake fluid .
Inspection and maintenance data .
Recommended lubricants.
Circuit diagram (with inching) .
Circuit diagram (without inching) .
Circuit diagram (lighting).
Circuit diagram (electric heater) .
Circuit diagram (Diesel heater)
Hydraulic and brake system schematic
Index .