Original Factory Operating Manual (User Manual) for Linde Forklift Truck with LPG Engine 350-03 series

Covered models:
H12T-03
H16T-03
H18T-03
H20T-03

Format: PDF, 113 pages
Language: Engish

Table of Contents:

Foreword
Approved applications
Technical note
Truck takeover
Description
Type plates
Technical data
Noise emission levels
Frequency characteristic for human body vibrations
Technical description
Engine
Hydraulic system
Operation
LHC control
Brakes
Steering
Electrical system
General view of truck
Controls and indicators
Composite instrument
Beginning operation
Safety rules
Important safety information
Handling fuels and lubricants
Accident prevention check
Operation of industrial trucks in the plant area
Running-in instructions
Experts
Safety instructions for the LPG system
Checks and services before initial operation
Daily checks
Daily pre-operational checks and services
Opening the bonnet
Closing the bonnet
Check the engine oil level
Checking the LP gas level
Check the coolant level in recovery tank
Visual, olfactory inspection of LPG system
Changing the LPG cylinder
Filling the LPG tank
Check the tyre inflation pressure
Adjusting the operator seat
Opening the gas cylinder or gas tank shutoff valve
Operation
Applying the seat belt
Opening the seat belt
Starting the engine
Stopping the engine
Closing the gas cylinder or LPG tank shutoff valve
Malfunctions during operation
Driving
Forward travel
Reverse travel
Changing the travel direction
Stopping
Single-pedal model
Steering system
Steering
Braking system
Service brake
Stop pedal
Parking brake
Applying the parking brake
Releasing the parking brake
Central-lever control of lifting device and attachments .
Tilting the mast forward
Tilting the mast back
Lifting the fork carriage
Lowering the fork carriage
Operating the attachments
Operating the sideshift
Operating the clamp
Single-lever control of lifting device and attachments
Installation of additional equipment
Switching on the front working lights
Switching on the rear working lights
Switching on the lights
Switching on the hazard warning lights
Turning on the front windscreen wiper
Turning on the rear windscreen wiper
Operating the turn indicator lights
Heater
Turning on the heater (version 1)
Fan motor fuse
Turning on the heater (version 2)
Operating the horn
Truck Data Management
Truck data acquisition
Condition code
Truck data acquisition - default setting
(PIN number and condition code)
Truck data acquisition - special setting
(PIN number)
Fuses
Check fuses, renew if required
Before lifting a load
Adjusting the fork spread
Loading
Travel with a load
Unloading
Parking the truck
Transport
Transport with lorry or low-bed semi-trailer
Hoisting the truck
Hoisting the truck with a crane
Hoisting the truck with the eyebolts
Wheel change
Catalytic converter, unregulated
Trailer coupling
Mast removal
Towing instructions
Towing
Towing procedure
Release the multiple disc brake
Open hydraulic pump pressure-relief valves
After towing
Reset brake
Emergency exit for trucks with rear windscreen
Taking the truck out of operation
Measures before taking the truck out of operation
Putting the truck back into operation
Disposal of old vehicles