Port Fuel Injection (1.8L), Direct Injection (1.4L Turbo), Common Rail Direct Injection (2.0L Diesel)
Ignition System:
Electronic Ignition with Knock Control
🔧 Transmission
Standard
Transmission Std:
6-Speed Manual (M32/F23 variants)
Optional
Transmission Opt:
6-Speed Automatic (GM 6T40/6T45)
Features
Transmission Features:
Active Select (Manual mode on Automatics), Cruise Control integration.
📐 Dimensions
Exterior
Length:
4660 mm (Sedan), 4461 mm (Hatchback)
Width:
1787 mm
Height:
1479 mm (Sedan), 1476 mm (Hatchback)
Wheelbase:
2685 mm
Interior
Seating Capacity:
5
Cargo
Cargo Volume Sedan:
450 Litres
Cargo Volume Hatchback:
370 Litres (seats up), 1254 Litres (seats down)
Weights
Tare Weight:
Approx. 1300-1500 kg (depending on variant)
Gross Vehicle Weight:
Approx. 1800-1950 kg
Towing Capacity Braked:
1200 kg (check specific variant)
Towing Capacity Unbraked:
500 kg (check specific variant)
🛡️ Safety Features
Ratings
Ancap Rating:
5 Star ANCAP (for earlier models, later versions may vary slightly)
Active Features
ABS:
Yes (Anti-lock Braking System)
Ebd:
Yes (Electronic Brakeforce Distribution)
Esc:
Yes (Electronic Stability Control)
Traction Control:
Yes (TCS)
Brake Assist:
Yes (BA)
Passive Features
Airbags:
Front airbags, Side curtain airbags, Front side airbags (depending on trim level)
Seatbelts:
Pretensioned, load-limiting seatbelts with three-point anchorage.
Child Seat Anchors:
ISOFIX mounting points
💡 Technology Features
Infotainment
Infotainment System:
Holden MyLink infotainment system (optional on some trims), featuring Bluetooth, USB connectivity, and touch-screen interface.
Audio Options:
Standard CD player, MP3 playback, AM/FM radio, speaker count varies by trim.
Driver Assistance
Cruise Control:
Standard on most models.
Parking Assistance:
Rear parking sensors and reversing camera available on higher trim levels.
Connectivity
Connectivity Features:
Bluetooth phone and audio streaming, USB and AUX input ports.
Navigation:
Optional satellite navigation system integrated with MyLink.
🔧 Maintenance
Service Intervals
Oil Change Interval:
15,000 km or 12 months (whichever comes first), or 7,500 km for severe driving conditions (refer to manual for specific engine type).
Air Filter Replacement:
30,000 km or 24 months.
Cabin Filter Replacement:
30,000 km or 24 months.
Spark Plug Replacement 1.8L:
60,000 km (use specified iridium plugs).
Spark Plug Replacement 1.4T:
80,000 km (use specified iridium plugs).
Coolant Replacement:
First replacement at 160,000 km or 5 years, then every 80,000 km or 4 years.
Transmission Fluid Auto:
Check condition, typically replace at 120,000 km or 6 years, or as per severe service schedule.
Transmission Fluid Manual:
Check condition, typically inspect at 100,000 km, replace if needed or at higher mileage intervals.
Fluid Specifications
Engine Oil 1.8L:
SAE 5W-30, API SM/SN, GM dexos1™ specification.
Engine Oil 1.4T:
SAE 5W-30, API SN, GM dexos1™ specification.
Engine Oil 2.0D:
SAE 5W-30, ACEA C3 specification, GM dexos2™ specification.
Coolant:
GM P/N 1050357 or equivalent, a mixture of 50% ethylene glycol and 50% deionized water.
Brake Fluid:
DOT 4
Transmission Fluid Auto:
GM P/N 88861133 or 19259100 (or equivalent), DEXRON®-VI.
Transmission Fluid Manual:
SAE 75W-90 API GL-4/GL-5.
Known Issues
Oil Leaks:
Potential valve cover gasket and oil pan gasket leaks, especially on higher mileage vehicles.
Thermostat Housing:
Cracking or leaking thermostat housing/water outlet, leading to coolant loss.
Turbocharger 1.4T:
Some reports of turbocharger issues (e.g., wastegate actuator problems) or oil consumption on early 1.4T engines.
Air Conditioning:
AC system leaks or compressor failures can occur.
Suspension Noise:
Strut mount, sway bar links, or control arm bushings can develop noise over time.
Diesel Particulate Filter Dpf:
For 2.0 Diesel, potential DPF regeneration issues if not driven regularly on longer journeys, or sensor failures.
📚 Vehicle History
Brand Heritage
Brand Focus:
Holden, Australian automotive manufacturer known for performance and family vehicles.
Model Evolution
Global Platform:
Based on the global GM Chevrolet Cruze, introduced to Australia as a Holden.
Generation Update 2013:
Minor update for 2013 model year, often referred to as JH series, with revised styling and features.
Production
Manufacturing Location:
Primarily South Korea (GM Daewoo) and Thailand for export markets including Australia.
Production Years:
First Generation (JG): 2008-2011, Second Generation (JH): 2011-2016.
🏆 Awards & Recognition
Recognitions
Awards General:
While specific major individual awards for the 2013 Holden Cruze are not widely documented, it competed in a segment with vehicles that frequently received 'Car of the Year' accolades from automotive publications. Its strength lay in its value proposition and features for the price point.
Ratings
Safety Ratings:
Achieved a 5-star safety rating from ANCAP, indicating a strong performance in crash safety tests.
Certifications
Manufacturing Standards:
Produced under stringent global manufacturing quality standards overseen by General Motors.