International IH Cub Cadet 73 Tractor WSM Service Manual
Ordinarie pris
$133.00
Försäljningspris
$133.00
Ordinarie pris
Enhetspris
/ per
Rea
Slutsåld
🏷️ Basic Information Identification Make: International Harvester (IH) Model: Cub Cadet 73 Model Line: Cub Cadet Original Series / Narrow Frame Product Type: Tractor Codes Manual Identifier: WSM Service Manual 👋 Introduction Market Position Target User: Cub Cadet 73 tractor owners, DIY mechanics, restoration enthusiasts, service technicians. Competitive Analysis Value Proposition: Empowers users to perform their own repairs, saving significant costs on labor and expert assistance. Key Features Ease Of Use: Easy-to-follow, step-by-step instructions designed for accessibility. Visual Aids: Includes pictures and wiring diagrams to clarify repair procedures. Comprehensiveness: Covers all areas of repair and routine maintenance. Knowledge Enhancement: Enables users to gain in-depth knowledge about their tractor's workings. 📋 Manual Details Coverage Areas Primary Coverage: Service, Repair, Maintenance, Troubleshooting Page Count Estimated Page Count: Refer to actual manual for exact count, typically 100-300 pages for such manuals. Manual Type Type: Workshop Service Manual (WSM) / Service Repair Manual Language Language: English Format File Format: PDF 📖 Manual Coverage Systems Covered Engine Mechanical: Engine overhaul, disassembly, assembly, component testing, specifications, timing. Fuel System: Carburetor service and adjustment, fuel pump, fuel lines, fuel tank. Cooling System: Radiator, thermostat, water pump, hoses, coolant specifications. Ignition System: Magneto or distributor, spark plugs, ignition timing, coil. Electrical System: Wiring diagrams, charging system (generator/alternator), starter motor, battery, lighting. Transmission And Drivetrain: Gearbox overhaul, clutch service, PTO (Power Take-Off) drive, differential, axles. Hydraulic System: Hydraulic pump, lift mechanism, control valve, cylinder, fluid specifications. Steering System: Steering gear, tie rods, linkage, adjustments. Brake System: Brake drum, shoes, linkage, adjustments, hydraulic/mechanical braking specifics. Chassis And Frame: Frame inspection, front axle, rear axle housing. Bodywork And Attachments: Hood, fenders, seat, mounting points for attachments. Procedures Included Routine Maintenance: Oil changes, filter replacement, lubrication points, inspection schedules. Troubleshooting: Diagnostic charts, symptom-based problem solving. Disassembly And Assembly: Step-by-step instructions for major component removal and installation. Adjustment Procedures: Carburetor, ignition timing, brakes, clutch, PTO engagement. Rebuilds And Overhauls: Detailed instructions for rebuilding engines, transmissions, hydraulic pumps, etc. Wiring Diagrams: Complete electrical system schematics. Technical Depth Depth Of Information: Comprehensive, in-depth coverage for professional-level repairs and diagnostics. Diagnostics: Advanced diagnostic procedures and troubleshooting guides. Specifications: Detailed torque values, clearances, tolerances, fluid capacities. Special Tools: Identification of any specialized tools required for specific procedures. 📊 Manual Specifications File Format Format: PDF Searchability: Likely text-searchable PDF, facilitating quick information retrieval. Print Quality Printability: Full printable pages, allowing users to print specific sections or the entire manual. Binding Type Binding Type: Digital (PDF download), no physical binding. Paper Type Paper Type: Not applicable (digital format). Delivery Delivery Method: Instant Download Requirements Software Requirement: Adobe PDF Reader or compatible PDF viewer. Compatibility: Compatible with all versions of Windows and Mac operating systems. ⚙️ Engine Specifications Primary Engine Engine Make: Kohler Engine Model: K161 (common, but variations may exist) Engine Type: Single-cylinder, 4-stroke, L-head (flathead) gasoline engine Displacement: Approximately 161 cc (9.83 cubic inches) Bore X Stroke: Typically 2.4375" x 2.75" (61.9 mm x 69.85 mm) Horsepower Rating: Approximately 7 HP (gross) at 3600 RPM Performance Cooling Method: Air-cooled Fuel System Fuel Type: Unleaded gasoline Carburetor: Kohler specific, often requiring precise adjustment. Ignition System Ignition Type: Battery ignition with breaker points and coil or magneto ignition (depending on serial number/year). 🔧 Transmission Standard Transmission Type: 3-speed manual transmission (specific gear ratios detailed in manual). Optional Transmission Options: No automatic or hydrostatic options for the 73 model. Features Drive System: Shaft drive to rear differential. Clutch Type: Dry, single-plate clutch. 📐 Dimensions Exterior Wheelbase: Approx. 44 inches (1118 mm) for narrow frame models. Overall Length: Approx. 60 inches (1524 mm) (without attachments). Overall Width: Approx. 34 inches (864 mm) (tire track dependent). Weights Shipping Weight: Approx. 400-450 lbs (181-204 kg). Operating Weight: Approx. 450-500 lbs (204-227 kg). 🛡️ Safety Features Ratings Safety Ratings: No formal safety rating systems like modern vehicles; relies on operator vigilance and adherence to manual procedures. Active Features Braking System: Mechanical contracting band brake or drum brake acting on driveshaft or rear axle. (Specific type depends on year/serial number, covered in manual). Passive Features Operator Presence: Typically a mechanical seat switch that kills ignition if operator leaves seat (functionality and diagnosis covered). 💡 Technology Features Infotainment Infotainment System: Not applicable for this era of tractor; basic mechanical controls only. Driver Assistance Driver Assistance Features: Not applicable; no electronic driver assistance features. Connectivity Connectivity Options: Not applicable; no electronic connectivity features. 🔧 Maintenance Service Intervals Engine Oil Change: Every 25-50 operating hours or annually, depending on usage severity. Air Filter Cleaning: Cleaned at least every 25 operating hours, replaced as needed. Grease Points: Lubricate all grease fittings every 25 operating hours. Fluid Specifications Engine Oil Type: SAE 30W HD (Heavy Duty) engine oil for most operating temperatures. Manual will specify viscosity based on ambient temp. Engine Oil Capacity: Approximately 1.5 U.S. Quarts (1.4 Liters). Transmission Oil...
No formal safety rating systems like modern vehicles; relies on operator vigilance and adherence to manual procedures.
Active Features
Braking System:
Mechanical contracting band brake or drum brake acting on driveshaft or rear axle. (Specific type depends on year/serial number, covered in manual).
Passive Features
Operator Presence:
Typically a mechanical seat switch that kills ignition if operator leaves seat (functionality and diagnosis covered).
💡 Technology Features
Infotainment
Infotainment System:
Not applicable for this era of tractor; basic mechanical controls only.
Driver Assistance
Driver Assistance Features:
Not applicable; no electronic driver assistance features.
Connectivity
Connectivity Options:
Not applicable; no electronic connectivity features.
🔧 Maintenance
Service Intervals
Engine Oil Change:
Every 25-50 operating hours or annually, depending on usage severity.
Air Filter Cleaning:
Cleaned at least every 25 operating hours, replaced as needed.
Grease Points:
Lubricate all grease fittings every 25 operating hours.
Fluid Specifications
Engine Oil Type:
SAE 30W HD (Heavy Duty) engine oil for most operating temperatures. Manual will specify viscosity based on ambient temp.
Engine Oil Capacity:
Approximately 1.5 U.S. Quarts (1.4 Liters).
Transmission Oil Type:
SAE 90W gear oil or Cub Cadet specific transmission lubricant. Manual will list exact specification.
Hydraulic Fluid Type:
IH Hy-Tran fluid or equivalent JD J20C/D specification hydraulic fluid.
Known Issues
Common Wear Points:
Clutch wear, PTO shaft wear, hydraulic pump leaks, carburetor gumming due to infrequent use/stale fuel, ignition system component failure (points, condenser).
Electrical Problems:
Corrosion on wiring terminals, failure of generator/regulator, worn starter brushes.
Transmission Issues:
Difficulty shifting, worn synchronizers (though early models may not have them), worn gears or bearings.
📚 Vehicle History
Brand Heritage
Brand:
International Harvester (IH) - a historical American manufacturer of agricultural and construction equipment.
Model Evolution
Cub Cadet Series:
Part of the original Cub Cadet line, known for its robust construction and versatility for its size. The 73 is a key model in the transition from the early 'narrow frame' designs.
Production
Production Period:
Early to mid-1960s (specific years for the '73' model vary but generally within 1963-1968 range).
Manufacturing Location:
Cub Cadet Division of International Harvester, USA.
🏆 Awards & Recognition
Recognitions
Industry Recognition:
The Cub Cadet Original series, including models like the 73, is widely recognized in the vintage tractor community for its durability, engineering quality, and historical significance as a homeowner-focused garden tractor.