John Deere Lawn Tractor 355d Service Repair Manual
Ordinarie pris
$133.00
Försäljningspris
$133.00
Ordinarie pris
Enhetspris
/ per
Rea
Slutsåld
🏷️ Basic Information Identification Make: John Deere Model: 355D Lawn Tractor Product Type: Service Repair Manual 👋 Introduction Market Position Category: Heavy-duty residential and commercial lawn tractor. Target User: Property owners with large acreage, landscaping professionals, groundskeepers. Competitive Analysis Key Competitors: Kubota, John Deere (other models), Toro, Ferris, Craftsman (higher-end models). Key Features Durability: Known for robust construction and reliable performance in demanding conditions. Diesel Engine: Offers the torque and fuel efficiency advantages of a diesel engine. 📋 Manual Details Coverage Areas Primary Coverage: Mechanical and electrical systems, maintenance, repair, troubleshooting, and diagnostics. Secondary Coverage: Component identification, specifications, procedures, and parts information. Page Count Estimated Page Count: Approximately 400-600 pages (typical for comprehensive service manuals). Manual Type Type: Factory Service Manual / Workshop Manual Language Language: English Format Format: Digital (PDF) and potentially Printed 📖 Manual Coverage Systems Covered Powertrain: Engine (overhaul, diagnosis, timing, cooling, lubrication), Transmission (hydrostatic drive, clutch, PTO operation). Chassis: Frame, steering system, suspension (front and rear axle), braking system (mechanical, parking brake). Electrical: Starting and charging system, lighting, ignition system (if applicable to diesel), control panel, wiring diagrams, fuses, relays. Hydraulics: Hydraulic pump, reservoir, lines, cylinders, hydraulic lift system (for mower deck/implements), hydraulic steering. Mower Deck: Deck components, blade removal/installation, belt routing, height adjustment mechanism, deck lift system. Procedures Included Maintenance: Scheduled maintenance intervals, oil changes, filter replacements, lubrication points, tire pressure checks. Troubleshooting: Diagnostic flowcharts, common problems and their solutions, symptom-based troubleshooting guides. Repair: Step-by-step disassembly and reassembly instructions for all major components and systems. Diagnostics: Engine performance testing, hydraulic system pressure testing, electrical system checks. Calibration: Engine governor adjustments, hydraulic system calibration (if applicable). Technical Depth Level: Comprehensive, covering routine maintenance to complete engine and transmission overhauls. Suitable for professional technicians and advanced DIY users. 📊 Manual Specifications File Format Digital Format: PDF (Portable Document Format) Searchability: Searchable text for quick information retrieval. Print Quality Digital Resolution: High-resolution (suitable for printing clear diagrams and text). Binding Type Printed Binding: Spiral-bound or perfect-bound for lay-flat usability (if printed). Paper Type Printed Paper: Durable, coated paper to withstand shop environments (if printed). ⚙️ Engine Specifications Primary Engine Make: Yanmar (typically) Model: 3-cylinder, liquid-cooled diesel (e.g., 3TNE68 or similar) Displacement: Approximately 1.1-1.3 Liters (1000-1300 cc) Performance Horsepower: Approximately 18-24 HP (gross horsepower) Torque: High torque output characteristic of diesel engines, suitable for heavy loads and inclines. Fuel System Type: Direct injection, naturally aspirated or turbocharged diesel. Fuel Type: Diesel Fuel Fuel Filter Part Number: Refer to manual for specific John Deere part number (e.g., AM100557 or equivalent). Cooling System Type: Liquid-cooled Lubrication System Oil Type: API CG-4 or CH-4 SAE 10W-30 or 15W-40 diesel engine oil (verify manual for exact spec). Oil Capacity: Approximately 1.5-2.0 Liters (refer to manual). Oil Filter Part Number: Refer to manual for specific John Deere part number (e.g., AM107423 or equivalent). 🔧 Transmission Standard Type: Hydrostatic Transmission (HST) Drive System: 2WD (Two-Wheel Drive) or 4WD (Four-Wheel Drive) depending on configuration. Features Control: Foot pedal control for variable speed and direction. Pto: Independent PTO (Power Take-Off) for mower deck engagement. Fluid Type Hydraulic Fluid: John Deere TY21374, TY22044, or equivalent Turf-Gard Hydraulic Oil (or J20C/J20D approved fluid). Check manual for specific viscosity and specification. Fluid Capacity Hydraulic Fluid Capacity: Approximately 5-7 Liters (refer to manual for exact capacity). 📐 Dimensions Exterior Wheelbase: Approximate: 50-55 inches (1270-1397 mm) Overall Length: Approximate: 70-80 inches (1778-2032 mm) without mower deck. Overall Width: Approximate: 45-55 inches (1143-1397 mm) depending on tire size. Weights Operating Weight: Approximate: 800-1000 lbs (363-454 kg) without attachments. Towing Capacity: Refer to operator's manual; typically designed for implement towing, not heavy trailer towing. 🛡️ Safety Features Ratings Rollover Protection: ROPS (Roll-Over Protective Structure) typically standard or optional. Active Features Operator Presence System: Standard feature preventing operation unless operator is seated and safety interlocks engaged. Parking Brake: Mechanical parking brake for secure stopping. Passive Features Seatbelt: Seatbelt integrated with ROPS if equipped. Guarding: Extensive guarding around PTO, belts, and rotating components. 💡 Technology Features Infotainment Features: Basic controls, hour meter, fuel gauge, warning lights. Not equipped with modern infotainment systems. Driver Assistance Features: Operator presence system, seat interlocks. Focus is on mechanical reliability rather than electronic driver assistance. Connectivity Features: No digital connectivity features typical of modern vehicles. 🔧 Maintenance Service Intervals Engine Oil Change: Every 100-200 operating hours or annually (refer to manual for precise interval). Air Filter Replacement: Inspect every 50 hours, replace annually or as needed based on conditions. Fuel Filter Replacement: Annually or every 200 operating hours. Hydraulic Fluid Change: Every 200-400 operating hours or annually. Fluid Specifications Coolant Type: John Deere Cool-Gard II or equivalent ethylene glycol-based coolant with corrosion inhibitors for diesel engines. Grease Type: John Deere Moly Grease or equivalent lithium complex grease with moly. Known Issues Common Wear Items: Hydrostatic pump/motor wear, starter motor, belts (PTO,...
Diagnostic flowcharts, common problems and their solutions, symptom-based troubleshooting guides.
Repair:
Step-by-step disassembly and reassembly instructions for all major components and systems.
Diagnostics:
Engine performance testing, hydraulic system pressure testing, electrical system checks.
Calibration:
Engine governor adjustments, hydraulic system calibration (if applicable).
Technical Depth
Level:
Comprehensive, covering routine maintenance to complete engine and transmission overhauls. Suitable for professional technicians and advanced DIY users.
📊 Manual Specifications
File Format
Digital Format:
PDF (Portable Document Format)
Searchability:
Searchable text for quick information retrieval.
Print Quality
Digital Resolution:
High-resolution (suitable for printing clear diagrams and text).
Binding Type
Printed Binding:
Spiral-bound or perfect-bound for lay-flat usability (if printed).
Paper Type
Printed Paper:
Durable, coated paper to withstand shop environments (if printed).
⚙️ Engine Specifications
Primary Engine
Make:
Yanmar (typically)
Model:
3-cylinder, liquid-cooled diesel (e.g., 3TNE68 or similar)
Displacement:
Approximately 1.1-1.3 Liters (1000-1300 cc)
Performance
Horsepower:
Approximately 18-24 HP (gross horsepower)
Torque:
High torque output characteristic of diesel engines, suitable for heavy loads and inclines.
Fuel System
Type:
Direct injection, naturally aspirated or turbocharged diesel.
Fuel Type:
Diesel Fuel
Fuel Filter Part Number:
Refer to manual for specific John Deere part number (e.g., AM100557 or equivalent).
Cooling System
Type:
Liquid-cooled
Lubrication System
Oil Type:
API CG-4 or CH-4 SAE 10W-30 or 15W-40 diesel engine oil (verify manual for exact spec).
Oil Capacity:
Approximately 1.5-2.0 Liters (refer to manual).
Oil Filter Part Number:
Refer to manual for specific John Deere part number (e.g., AM107423 or equivalent).
🔧 Transmission
Standard
Type:
Hydrostatic Transmission (HST)
Drive System:
2WD (Two-Wheel Drive) or 4WD (Four-Wheel Drive) depending on configuration.
Features
Control:
Foot pedal control for variable speed and direction.
Pto:
Independent PTO (Power Take-Off) for mower deck engagement.
Fluid Type
Hydraulic Fluid:
John Deere TY21374, TY22044, or equivalent Turf-Gard Hydraulic Oil (or J20C/J20D approved fluid). Check manual for specific viscosity and specification.
Fluid Capacity
Hydraulic Fluid Capacity:
Approximately 5-7 Liters (refer to manual for exact capacity).
📐 Dimensions
Exterior
Wheelbase:
Approximate: 50-55 inches (1270-1397 mm)
Overall Length:
Approximate: 70-80 inches (1778-2032 mm) without mower deck.
Overall Width:
Approximate: 45-55 inches (1143-1397 mm) depending on tire size.
Weights
Operating Weight:
Approximate: 800-1000 lbs (363-454 kg) without attachments.
Towing Capacity:
Refer to operator's manual; typically designed for implement towing, not heavy trailer towing.
🛡️ Safety Features
Ratings
Rollover Protection:
ROPS (Roll-Over Protective Structure) typically standard or optional.
Active Features
Operator Presence System:
Standard feature preventing operation unless operator is seated and safety interlocks engaged.
Parking Brake:
Mechanical parking brake for secure stopping.
Passive Features
Seatbelt:
Seatbelt integrated with ROPS if equipped.
Guarding:
Extensive guarding around PTO, belts, and rotating components.
💡 Technology Features
Infotainment
Features:
Basic controls, hour meter, fuel gauge, warning lights. Not equipped with modern infotainment systems.
Driver Assistance
Features:
Operator presence system, seat interlocks. Focus is on mechanical reliability rather than electronic driver assistance.
Connectivity
Features:
No digital connectivity features typical of modern vehicles.
🔧 Maintenance
Service Intervals
Engine Oil Change:
Every 100-200 operating hours or annually (refer to manual for precise interval).
Air Filter Replacement:
Inspect every 50 hours, replace annually or as needed based on conditions.
Fuel Filter Replacement:
Annually or every 200 operating hours.
Hydraulic Fluid Change:
Every 200-400 operating hours or annually.
Fluid Specifications
Coolant Type:
John Deere Cool-Gard II or equivalent ethylene glycol-based coolant with corrosion inhibitors for diesel engines.
Grease Type:
John Deere Moly Grease or equivalent lithium complex grease with moly.