Original Illustrated Factory Operating Instructions (User Manual) for Linde Pallet Stacker Type 139.

Original factory manuals for Linde Forklift Trucks, contains high quality images, circuit diagrams and instructions to help you to operate and repair your truck

Covered models:
L12R
L16R

Format: PDF, 62 Pages
Language: English

Contents:

Description
Plates and labels
Technical characteristics
Technical description
Overview
Controls
Indicators
Hour meter (operation)
Battery discharge limiter indicator
Startup I Daily checks and work before startup
Safety rules
Definition of safety terms
Use of ingredients
Periodic checks on the pallet truck
Recommendations for startup
Checks before first startup
Daily checks before use
Checking forward/reverse and raise/lower controls .
Checking electrical steering
Checking the brakes
Checking the emergency stop and driver presence button
Checking the parking brake switch
Checkingthe horn
Checking the mast protection shield
Checking the battery charge condition
L12R - L16R: opening and closing the battery compartment
L12RI - L16RI: opening and closing the battery compartment
Connecting the battery connector
Recharging the battery with an external charger
Checking the condition of cables, terminals and the battery connector
Checkingthe electrolyte level and topping up with water.... .
Checking the electrolyte density
Removing and replacing the battery
Replacing the battery from the side using a trolley with rollers
Use
Usage recommendations
Adjusting the seat
Startup
Emergency stop button
Seat safety
Parking brake inverter switch
Identifyingthe running direction
Steering
Turning direction in forward running
Control of the horn
Driving
Forwardrunning
Reversingthe running direction
Driver presence button
Using the pallet truck on a slope
Going up and down slopes
Starting on a slope
Electromagnetic braking
Electric foot brake
Braking by reversing the running direction
Parking brake
L.B.C,automatic braking
Using the mast
Raising and lowering the fork support apron
Raisingand lowering the initial lift
Fork high safety devices
Handlingloads
Reading the load diagram
Picking up the load on the ground
Transporting a load
Putting a load down on the ground
Stacking a load
Picking up a load above ground level
Before leaving the pallet truck
Slinging/liftingthe pallettruck
Towing
Removing the mast
Transport and storage of the pallet truck
Maintenance
General comments
Work on the lifting mast
Simplex lifting mast
Safety device for the simplex lifting mast
Standard lifting mast
Safety device for the standard lifting mast
Duplex lifting mast
Safety device for the Duplex lifting mast
Triplex lifting mast
Safety device for the Triplex lifting mast
Inspection and maintenance work after the first
50 hours of service*
Maintenance work calendar
Maintenance depending on needs
Cleaning the pallettruck
Cleaning and greasing the chains
Cleaning and greasing the mast
Opening the motor compartment cover
Removing the platform surface
Removing the steering wheel
Removingthe dashboard
Checking the fuses
Cleaning the steering ring gears
Checking attachment and condition of wheels
Fixingand adjusting stabilizing wheels
Checkingthe electrolyte level and topping up with water
Checking the electrolyte density
Checking the condition of cables, terminals and the battery connector
Cleaning the battery and its compartment
Maintenance every 500 hours
Lubrication of the traction unit orientation bearing
Lubrication of the initial lift return lever
Checkingthe various hinge pins
Checking the reduction gear oil level
Checkingthe hydraulic fluid level
Checking for leaks in the hydraulic circuit
Checking the condition and attachment of the mast and chains
Adjusting the length of mast chains
Checking the condition and attachment of electrical cables and connections
Cleaning the electrical plate and checking contact wear
Adjusting the electromagnetic brake
Inspection of traction motor brushes, and replacement if necessary
Inspection of steering motor brushes, and replacement if necessary
Maintenance every 1000 hours
Inspection of the pump motor brushes, and replacement if necessary
Cleaning the intake strainer
Replacing the hydraulic fluid return filter
Checking the mechanical attachment of devices
Maintenance every 2000 hours
Cleaning the intake strainer
Replacing the hydraulic fluid return filter
Replacingthe hydraulic fluid
Replacing the reduction gear oil
Recommended lubricants
Technical characteristics
Hydraulic diagrams
Electrical diagrams for L12R without LI
Electrical diagrams for L12R with LI
Index