Manual Coverage
|
Systems Covered
|
Engine:
|
Complete engine tear down and rebuild, carburetor service, ignition system, fuel system (including PGM-FI for D models), lubrication, cooling system.
|
Drivetrain:
|
Transmission overhaul, clutch service, drive shafts, differential, gear reduction.
|
Suspension And Steering:
|
Front and rear suspension components, steering system, wheel alignment.
|
Brakes:
|
Brake system inspection, hydraulic components, pad replacement, drum brake service.
|
Electrical:
|
Starting system, charging system (stator, regulator/rectifier), lighting, ignition switch, battery service.
|
Body And Frame:
|
Frame inspection, body panel removal/installation, fenders, seat, handlebars.
|
Procedures Included
|
Maintenance:
|
Scheduled maintenance, fluid changes, filter replacements, valve adjustments, tire pressure checks.
|
Troubleshooting:
|
Diagnostic procedures for common problems, 'no spark' issues, starting problems, electrical faults.
|
Repair:
|
Complete step-by-step repair instructions for all major vehicle systems.
|
Rebuild:
|
Detailed instructions for complete engine and transmission rebuilds.
|
Technical Depth
|
Technical Depth:
|
Comprehensive, covering basic to advanced repair and overhaul procedures.
|
Diagnostic Capabilities:
|
Includes troubleshooting charts and guidance for identifying and resolving issues.
|
Data Provision:
|
Contains critical data such as torque specifications, clearances, and fluid capacities.
|
Engine Specifications
|
Primary Engine
|
Engine Type:
|
Air-cooled, 4-stroke (Typical for this era of TRX200 models)
|
Displacement:
|
Approximately 192cc to 196cc (Specific to the TRX200/200D models covered).
|
Bore X Stroke:
|
Refer to manual for precise specifications (e.g., typical bore around 63-64mm, stroke around 62-63mm).
|
Compression Ratio:
|
Refer to manual for precise specifications (typically around 8.5:1 to 9.5:1).
|
Performance
|
Horsepower:
|
Refer to manual for precise specifications (estimated 15-20 HP).
|
Torque:
|
Refer to manual for precise specifications.
|
Fuel System
|
Fuel Delivery:
|
Carburetor (TRX200), PGM-FI Fuel Injection (TRX200D Type II).
|
Carburetor Type:
|
Refer to manual for specific carburetor model (e.g., Keihin CV type).
|
Fuel Injection System:
|
PGM-FI (for TRX200D Type II), details on sensors and ECU covered.
|
Engine Components
|
Ignition System:
|
CDI (Capacitor Discharge Ignition) or similar electronic ignition.
|
Oil Type:
|
Refer to manual for precise specifications (e.g., SAE 10W-40 API SG or similar motorcycle/ATV specific oil).
|
Oil Capacity:
|
Refer to manual for precise specifications (typically around 1.5-2.0 liters).
|
Dimensions
|
Exterior
|
Length:
|
Refer to manual for precise specifications (approx. 75-80 inches).
|
Width:
|
Refer to manual for precise specifications (approx. 40-45 inches).
|
Height:
|
Refer to manual for precise specifications (approx. 40-45 inches).
|
Weights
|
Dry Weight:
|
Refer to manual for precise specifications (typically around 350-400 lbs).
|
Fuel Capacity:
|
Refer to manual for precise specifications (typically around 2.5-3.0 gallons).
|
Tires
|
Front Tire Size:
|
Refer to manual for precise specifications (e.g., AT22x7-11).
|
Rear Tire Size:
|
Refer to manual for precise specifications (e.g., AT22x10-9).
|
Tire Pressure:
|
Refer to manual for precise specifications (e.g., 2.5 psi front, 2.0 psi rear).
|
Maintenance
|
Service Intervals
|
Oil Change Interval:
|
Refer to manual for recommended intervals (typically every 600-1000 miles or annually).
|
Air Filter Cleaning:
|
Refer to manual for recommended intervals (frequent cleaning/replacement in dusty conditions).
|
Spark Plug Replacement:
|
Refer to manual for recommended intervals and correct spark plug type (e.g., NGK DR8ES-L or equivalent).
|
Valve Clearance Adjustment:
|
Refer to manual for recommended intervals (typically every 1000-1500 miles) and specific clearance values (e.g., intake 0.05-0.07mm, exhaust 0.07-0.09mm).
|
Fluid Specifications
|
Coolant Type:
|
N/A (Air-cooled engine)
|
Brake Fluid Type:
|
DOT 3 or DOT 4 Brake Fluid (if hydraulic brakes are equipped).
|
Known Issues
|
Common Problems:
|
Carburetor gumming, electrical connection corrosion, starter motor issues, occasional clutch wear. Manual provides diagnostic steps for these.
|