🏷️ Basic Information Identification Make: Daewoo Model: Fino Year: 1992 Country Of Origin: South Korea 👋 Introduction Market Position Segment: Subcompact hatchback / sedan Target Audience: Budget-conscious consumers seeking reliable and economical transportation. Competitive Analysis Key Competitors: Hyundai Pony, Kia Pride, Suzuki Swift, Ford Festiva, Toyota Starlet. Key Features Value Proposition: Affordability, fuel efficiency, simple mechanicals. Design Philosophy: Compact and practical design focused on urban driving. 📋 Manual Details Coverage Areas All Models Covered: Yes All Engines Covered: Yes All Trims Covered: Yes All Transmission Types Covered: Yes Page Count Estimated Page Count: Approximately 1000+ Manual Type Type: Workshop Repair Service Manual Language Language: English Format Format: PDF Download 📖 Manual Coverage Systems Covered Engine: Complete overhaul, diagnostic procedures, component testing, timing belt/chain replacement, cooling system, lubrication system, fuel system (carburetor/injection), ignition system, emissions control. Transmission: Manual and Automatic transmission overhaul, clutch service, gearshift linkage, transmission fluid checks and replacement, diagnostic codes. Brakes: Hydraulic system, disc and drum brake service, parking brake, ABS (if equipped), bleeding procedures, component replacement (pads, rotors, calipers, master cylinder). Suspension: Front and rear suspension components, shock absorbers, struts, springs, control arms, wheel bearings, steering knuckle, alignment specifications. Steering: Power steering system, steering rack, tie rods, steering column, wheel alignment. Electrical System: Battery, charging system (alternator, starter), ignition system, lighting system, wiring diagrams for all circuits, fuses, relays, sensors, diagnostic trouble codes (DTCs). Body And Chassis: Body panel repair, door mechanisms, glass replacement, interior trim, chassis components, corrosion protection. HVAC: Air conditioning system, heater, ventilation, refrigerant handling, component replacement. Fuel System: Fuel pump, fuel filter, fuel injectors (if applicable), carburetor adjustment and overhaul, fuel tank service. Procedures Included Maintenance: Scheduled maintenance intervals, fluid changes (oil, coolant, brake fluid, transmission fluid, power steering fluid), filter replacements (oil, air, fuel), spark plug replacement, belt and hose inspection and replacement. Troubleshooting: System-by-system diagnostic flowcharts, common problem identification, symptom-based diagnosis, electrical system troubleshooting using wiring diagrams. Repair: Detailed step-by-step instructions for component removal, disassembly, inspection, repair, reassembly, and installation for all major vehicle systems. Diagnostics: OBD-I diagnostic codes (if applicable), sensor testing, actuator testing, pressure testing, multimeter usage. Specifications: Torque specifications for all fasteners, fluid capacities, electrical specifications, engine timing, valve clearances, wheel alignment angles. Technical Depth Depth: Comprehensive, suitable for professional technicians and advanced DIY enthusiasts. Covers everything from basic maintenance to complete engine and transmission rebuilds. 📊 Manual Specifications File Format File Type: PDF Searchable Text: Likely searchable if the PDF was created from a digital source or scanned with OCR. Print Quality Quality: Variable, dependent on the original source scan. Professional manuals typically feature high-resolution diagrams and clear text. Binding Type Binding: N/A (Digital PDF) Paper Type Paper Type: N/A (Digital PDF) ⚙️ Engine Specifications Primary Engine Engine Code Examples: G13A (common for this era Daewoo models, though Fino specific might vary) Engine Type: Inline 3-cylinder or Inline 4-cylinder gasoline engine (specific to Fino variant) Displacement: Typically 0.8L to 1.0L for this class of vehicle. Performance Horsepower Range: Estimated 45-60 HP Torque Range: Estimated 60-80 Nm Fuel System Fuel Delivery: Carbureted or early Multi-Point Fuel Injection (MPI) Fuel Type: Unleaded Gasoline Cooling System Coolant Type: Ethylene Glycol based coolant (e.g., 50/50 mix with distilled water) 🔧 Transmission Standard Type: 5-speed Manual Transmission Optional Type: 3-speed Automatic Transmission (availability may vary by market) Features Fluid Type Manual: API GL-4 Gear Oil (e.g., 75W-90 or 80W-90) Fluid Type Automatic: Dexron III or equivalent ATF 📐 Dimensions Exterior Body Styles: 3-door Hatchback, 5-door Hatchback, potentially a 2-door Sedan variant. Length: Approximately 3500-3700 mm Width: Approximately 1500-1600 mm Height: Approximately 1400-1500 mm Weights Curb Weight: Approximately 750-850 kg Gross Vehicle Weight Rating: Estimated 1200-1300 kg 🛡️ Safety Features Ratings Crash Test Data: Limited official safety ratings available for this era and model from major agencies like NHTSA or Euro NCAP. Active Features ABS: Optional or not available on all models. Passive Features Seatbelts: Standard three-point front seatbelts, two-point rear seatbelts (likely). Airbags: Driver airbag optional or not available on most models. Body Structure: Basic unibody construction with crumple zones. 💡 Technology Features Infotainment Audio System: Basic AM/FM radio with cassette player, potentially with 2 or 4 speakers. Driver Assistance Features: Minimal driver assistance features. Primarily focused on basic transportation. Connectivity Features: No modern connectivity features (e.g., Bluetooth, USB, smartphone integration). 🔧 Maintenance Service Intervals Engine Oil Change: Every 5,000 km or 6 months, whichever comes first. Oil Filter Replacement: At every engine oil change. Air Filter Replacement: Every 15,000 km or annually. Fuel Filter Replacement: Every 20,000 - 30,000 km. Spark Plug Replacement: Every 30,000 - 40,000 km (depending on plug type). Timing Belt Replacement: Every 75,000 - 90,000 km or 5 years. Fluid Specifications Engine Oil Viscosity: 10W-30 or 10W-40 API SG/SH or higher. Coolant Capacity: Approximately 4.0 - 4.5 liters. Brake Fluid Type: DOT 3 or DOT 4. Known...
Front and rear suspension components, shock absorbers, struts, springs, control arms, wheel bearings, steering knuckle, alignment specifications.
Steering:
Power steering system, steering rack, tie rods, steering column, wheel alignment.
Electrical System:
Battery, charging system (alternator, starter), ignition system, lighting system, wiring diagrams for all circuits, fuses, relays, sensors, diagnostic trouble codes (DTCs).
Body And Chassis:
Body panel repair, door mechanisms, glass replacement, interior trim, chassis components, corrosion protection.
HVAC:
Air conditioning system, heater, ventilation, refrigerant handling, component replacement.
Fuel System:
Fuel pump, fuel filter, fuel injectors (if applicable), carburetor adjustment and overhaul, fuel tank service.
Procedures Included
Maintenance:
Scheduled maintenance intervals, fluid changes (oil, coolant, brake fluid, transmission fluid, power steering fluid), filter replacements (oil, air, fuel), spark plug replacement, belt and hose inspection and replacement.
Troubleshooting:
System-by-system diagnostic flowcharts, common problem identification, symptom-based diagnosis, electrical system troubleshooting using wiring diagrams.
Repair:
Detailed step-by-step instructions for component removal, disassembly, inspection, repair, reassembly, and installation for all major vehicle systems.
Torque specifications for all fasteners, fluid capacities, electrical specifications, engine timing, valve clearances, wheel alignment angles.
Technical Depth
Depth:
Comprehensive, suitable for professional technicians and advanced DIY enthusiasts. Covers everything from basic maintenance to complete engine and transmission rebuilds.
📊 Manual Specifications
File Format
File Type:
PDF
Searchable Text:
Likely searchable if the PDF was created from a digital source or scanned with OCR.
Print Quality
Quality:
Variable, dependent on the original source scan. Professional manuals typically feature high-resolution diagrams and clear text.
Binding Type
Binding:
N/A (Digital PDF)
Paper Type
Paper Type:
N/A (Digital PDF)
⚙️ Engine Specifications
Primary Engine
Engine Code Examples:
G13A (common for this era Daewoo models, though Fino specific might vary)
Engine Type:
Inline 3-cylinder or Inline 4-cylinder gasoline engine (specific to Fino variant)
Displacement:
Typically 0.8L to 1.0L for this class of vehicle.
Performance
Horsepower Range:
Estimated 45-60 HP
Torque Range:
Estimated 60-80 Nm
Fuel System
Fuel Delivery:
Carbureted or early Multi-Point Fuel Injection (MPI)
Fuel Type:
Unleaded Gasoline
Cooling System
Coolant Type:
Ethylene Glycol based coolant (e.g., 50/50 mix with distilled water)
🔧 Transmission
Standard
Type:
5-speed Manual Transmission
Optional
Type:
3-speed Automatic Transmission (availability may vary by market)
Features
Fluid Type Manual:
API GL-4 Gear Oil (e.g., 75W-90 or 80W-90)
Fluid Type Automatic:
Dexron III or equivalent ATF
📐 Dimensions
Exterior
Body Styles:
3-door Hatchback, 5-door Hatchback, potentially a 2-door Sedan variant.
Length:
Approximately 3500-3700 mm
Width:
Approximately 1500-1600 mm
Height:
Approximately 1400-1500 mm
Weights
Curb Weight:
Approximately 750-850 kg
Gross Vehicle Weight Rating:
Estimated 1200-1300 kg
🛡️ Safety Features
Ratings
Crash Test Data:
Limited official safety ratings available for this era and model from major agencies like NHTSA or Euro NCAP.
Active Features
ABS:
Optional or not available on all models.
Passive Features
Seatbelts:
Standard three-point front seatbelts, two-point rear seatbelts (likely).
Airbags:
Driver airbag optional or not available on most models.
Body Structure:
Basic unibody construction with crumple zones.
💡 Technology Features
Infotainment
Audio System:
Basic AM/FM radio with cassette player, potentially with 2 or 4 speakers.
Driver Assistance
Features:
Minimal driver assistance features. Primarily focused on basic transportation.
Connectivity
Features:
No modern connectivity features (e.g., Bluetooth, USB, smartphone integration).
🔧 Maintenance
Service Intervals
Engine Oil Change:
Every 5,000 km or 6 months, whichever comes first.
Oil Filter Replacement:
At every engine oil change.
Air Filter Replacement:
Every 15,000 km or annually.
Fuel Filter Replacement:
Every 20,000 - 30,000 km.
Spark Plug Replacement:
Every 30,000 - 40,000 km (depending on plug type).
Timing Belt Replacement:
Every 75,000 - 90,000 km or 5 years.
Fluid Specifications
Engine Oil Viscosity:
10W-30 or 10W-40 API SG/SH or higher.
Coolant Capacity:
Approximately 4.0 - 4.5 liters.
Brake Fluid Type:
DOT 3 or DOT 4.
Known Issues
Common Problems:
Rust around wheel arches and sills, carburetor issues (stalling, rough idle), minor electrical gremlins, worn suspension bushings, occasional overheating due to radiator or thermostat issues.
Preventative Maintenance Tips:
Regularly check for rust, keep cooling system in good order, clean or rebuild carburetor if performance degrades.
📚 Vehicle History
Brand Heritage
Daewoo Origin:
Daewoo Motor Company was a South Korean automobile manufacturer, established in 1982, and became known for producing affordable vehicles.
Model Evolution
Fino Lineage:
The Fino was a product of Daewoo's strategy to enter and compete in the small car market. It was developed on a platform that had roots in earlier GM-S (GM Korea) designs, potentially linked to Isuzu or Suzuki architectures.
Production
Production Years:
The Daewoo Fino was produced in the early 1990s, with the 1992 model year being a key iteration.
Manufacturing Location:
South Korea
🏆 Awards & Recognition
Recognitions
Awards Received:
Likely no significant industry awards for this specific model, focus was on budget affordability.
Bir seçim yapmanız sayfanın tamamının yenilenmesine neden olur.