🏷️ Basic Information Identification Make: Massey Ferguson Model: MF35 Variant: TE-A20, TE-D20 Type: Tractor Codes Internal Product Code: MF35TE20WM 👋 Introduction Market Position Market Segment: Classic utility tractor service and repair. Competitive Analysis Value Proposition: Provides essential technical data for maintaining and repairing iconic Massey Ferguson models, bridging the gap for owners of these vintage machines. Key Features Documentation Type: Combines workshop repair procedures with a parts catalogue for the TE-20 variant, offering dual utility. 📋 Manual Details Coverage Areas Covered Systems: Engine, Cooling, Fuel, Governor, Electrical, Lighting, Clutch, Transmission, Rear Axle, Hydraulic, PTO, Front Axle, Brakes, Wheels, Steering, Power Shut-off, Body, Tin Work, General Information, Specifications, Circuit Diagrams, Parts Catalogue (for TE-20) Page Count Estimated Page Count: Extensive (exact count not provided, but typical for comprehensive workshop manuals) Manual Type Type: Workshop Manual / Service Manual / Repair Manual / Parts Catalogue Language Language: English Format File Format: PDF (Scanned) 📖 Manual Coverage Systems Covered Engine System: Detailed breakdown of engine components, disassembly, assembly, and troubleshooting for various engine options fitted to MF35 and TE-20 series. Cooling System: Radiator, thermostat, water pump, fan, hoses, coolant specifications, and maintenance procedures. Fuel System: Carburetor adjustment/overhaul, fuel pump, filters, lines, diesel injection systems (if applicable), and troubleshooting. Governor System: Calibration, adjustment, and repair of mechanical governors for consistent engine speed. Electrical System: Battery, generator/alternator, starter motor, ignition system, wiring diagrams, troubleshooting. Lighting System: Headlights, taillights, work lights, indicator lights, wiring, bulb specifications. Clutch System: Clutch operation, adjustment, replacement of friction plate, pressure plate, and release bearing. Transmission System: Gearbox disassembly, reassembly, gear selection, lubrication, and common issues. Rear Axle: Differential, final drives, PTO drive, axle housing, bearings, seals, and lubrication. Hydraulic System: Hydraulic pump, control valve, lift arms, linkage, fluid types, troubleshooting, and common repairs for the Ferguson System (often referred to as '3-point linkage'). Pto System: Power Take-Off (PTO) shaft, gearbox, engagement, and maintenance. Front Axle: Kingpins, steering joints, wheel bearings, front axle beam, and associated maintenance. Brake System: Brake pedals, linkages, brake shoes/drums, adjustment, and hydraulic brake fluid specifications. Wheel System: Wheel nuts, tire pressures, front and rear wheel assembly, and alignment. Tin Work: Body panels, fenders, bonnet, and related sheet metal components. Steering System: Steering wheel, steering column, drag links, tie rods, and steering box adjustment/repair. Power Shut Off: Engine stop control mechanisms. Body System: General bodywork, seating, controls, and operator's station. Circuit Diagram: Electrical wiring diagrams for troubleshooting and component identification. Procedures Included Maintenance: Scheduled maintenance, lubrication points, fluid changes, filter replacements, and general upkeep. Troubleshooting: Diagnostic procedures for common operational issues across all systems. Repair: Step-by-step instructions for disassembly, component repair, reassembly, and adjustment of all major systems. Overhaul: Comprehensive instructions for engine, transmission, and hydraulic system overhauls. Parts Identification: Detailed illustrations and part numbers for the TE-20 tractor, aiding in parts sourcing. Technical Depth Depth: Comprehensive coverage suitable for professional mechanics and experienced DIY users. Includes detailed specifications, torque values, clearances, and diagnostic information. 📊 Manual Specifications File Format Format: PDF Print Quality Quality: Scanned document. Quality may vary based on original source material, but typically legible for repair purposes. Binding Type Binding: Digital (PDF) Paper Type Paper Type: N/A (Digital) ⚙️ Engine Specifications Primary Engine Engine Family: Perkins P3 Series Diesel (common), Standard Petrol/TVO variants for TE-20. Displacement Diesel: Approximately 2.0L (e.g., Perkins 3.152 variant) Displacement Petrol: Approximately 1.5L - 2.0L (depending on specific TE-20 model) Performance Horsepower Diesel: Typically in the 30-40 HP range (varies by exact engine and rating). Horsepower Petrol: Typically in the 20-30 HP range (varies by exact engine and rating). Fuel System Fuel Type Diesel: Diesel Fuel Type Petrol: Petrol/Gasoline, TVO (Tractor Vaporizing Oil) Injection System Diesel: Indirect Injection (usually CAV or Simms) Cooling System Cooling Type: Water-Cooled 🔧 Transmission Standard Transmission Type: Manual Gearbox Gear Speeds: Typically 4-speed or 6-speed forward, 1 reverse (specifics vary by model). Features Power Take Off: Standard PTO shaft, usually 540 RPM. Hydraulic Lift: Ferguson System (three-point linkage) with hydraulic lift and draft control. 📐 Dimensions Exterior Wheelbase: Approximately 70-75 inches (varies slightly). Weights Operating Weight: Approximately 3000-3800 lbs (varies by configuration). 🛡️ Safety Features Active Features Braking System: Drum brakes, foot-operated with mechanical or hydraulic actuation. Passive Features Operator Station: Open station design typical for the era, no enclosed cab unless added aftermarket. 💡 Technology Features Infotainment Features: N/A - This is a vintage agricultural tractor, not equipped with modern infotainment systems. Driver Assistance Features: N/A - Basic mechanical systems only. 🔧 Maintenance Service Intervals Engine Oil Change: Typically every 100-150 operating hours or annually. (Refer to manual for precise intervals). Hydraulic Oil Change: Typically every 600-1000 operating hours or annually. (Refer to manual). Fluid Specifications Engine Oil Type: API CD/SE or equivalent, SAE 30 or 10W-30 (depending on climate and engine variant). (Refer to manual for specific recommendation). Hydraulic Oil Type: Massey...
Headlights, taillights, work lights, indicator lights, wiring, bulb specifications.
Clutch System:
Clutch operation, adjustment, replacement of friction plate, pressure plate, and release bearing.
Transmission System:
Gearbox disassembly, reassembly, gear selection, lubrication, and common issues.
Rear Axle:
Differential, final drives, PTO drive, axle housing, bearings, seals, and lubrication.
Hydraulic System:
Hydraulic pump, control valve, lift arms, linkage, fluid types, troubleshooting, and common repairs for the Ferguson System (often referred to as '3-point linkage').
Pto System:
Power Take-Off (PTO) shaft, gearbox, engagement, and maintenance.
Front Axle:
Kingpins, steering joints, wheel bearings, front axle beam, and associated maintenance.
Wheel nuts, tire pressures, front and rear wheel assembly, and alignment.
Tin Work:
Body panels, fenders, bonnet, and related sheet metal components.
Steering System:
Steering wheel, steering column, drag links, tie rods, and steering box adjustment/repair.
Power Shut Off:
Engine stop control mechanisms.
Body System:
General bodywork, seating, controls, and operator's station.
Circuit Diagram:
Electrical wiring diagrams for troubleshooting and component identification.
Procedures Included
Maintenance:
Scheduled maintenance, lubrication points, fluid changes, filter replacements, and general upkeep.
Troubleshooting:
Diagnostic procedures for common operational issues across all systems.
Repair:
Step-by-step instructions for disassembly, component repair, reassembly, and adjustment of all major systems.
Overhaul:
Comprehensive instructions for engine, transmission, and hydraulic system overhauls.
Parts Identification:
Detailed illustrations and part numbers for the TE-20 tractor, aiding in parts sourcing.
Technical Depth
Depth:
Comprehensive coverage suitable for professional mechanics and experienced DIY users. Includes detailed specifications, torque values, clearances, and diagnostic information.
📊 Manual Specifications
File Format
Format:
PDF
Print Quality
Quality:
Scanned document. Quality may vary based on original source material, but typically legible for repair purposes.
Binding Type
Binding:
Digital (PDF)
Paper Type
Paper Type:
N/A (Digital)
⚙️ Engine Specifications
Primary Engine
Engine Family:
Perkins P3 Series Diesel (common), Standard Petrol/TVO variants for TE-20.
Displacement Diesel:
Approximately 2.0L (e.g., Perkins 3.152 variant)
Displacement Petrol:
Approximately 1.5L - 2.0L (depending on specific TE-20 model)
Performance
Horsepower Diesel:
Typically in the 30-40 HP range (varies by exact engine and rating).
Horsepower Petrol:
Typically in the 20-30 HP range (varies by exact engine and rating).
Fuel System
Fuel Type Diesel:
Diesel
Fuel Type Petrol:
Petrol/Gasoline, TVO (Tractor Vaporizing Oil)
Injection System Diesel:
Indirect Injection (usually CAV or Simms)
Cooling System
Cooling Type:
Water-Cooled
🔧 Transmission
Standard
Transmission Type:
Manual Gearbox
Gear Speeds:
Typically 4-speed or 6-speed forward, 1 reverse (specifics vary by model).
Features
Power Take Off:
Standard PTO shaft, usually 540 RPM.
Hydraulic Lift:
Ferguson System (three-point linkage) with hydraulic lift and draft control.
📐 Dimensions
Exterior
Wheelbase:
Approximately 70-75 inches (varies slightly).
Weights
Operating Weight:
Approximately 3000-3800 lbs (varies by configuration).
🛡️ Safety Features
Active Features
Braking System:
Drum brakes, foot-operated with mechanical or hydraulic actuation.
Passive Features
Operator Station:
Open station design typical for the era, no enclosed cab unless added aftermarket.
💡 Technology Features
Infotainment
Features:
N/A - This is a vintage agricultural tractor, not equipped with modern infotainment systems.
Driver Assistance
Features:
N/A - Basic mechanical systems only.
🔧 Maintenance
Service Intervals
Engine Oil Change:
Typically every 100-150 operating hours or annually. (Refer to manual for precise intervals).
Hydraulic Oil Change:
Typically every 600-1000 operating hours or annually. (Refer to manual).
Fluid Specifications
Engine Oil Type:
API CD/SE or equivalent, SAE 30 or 10W-30 (depending on climate and engine variant). (Refer to manual for specific recommendation).
Hydraulic Oil Type:
Massey Ferguson M-1121, M-1135, or equivalent UTF (Universal Tractor Transmission Fluid) with ISO VG 46 viscosity. (Refer to manual).
Coolant Type:
Ethylene Glycol based antifreeze with corrosion inhibitors. (Refer to manual for mixture ratio and type).
Transmission Oil Type:
Gear oil, typically SAE 80W-90 or SAE 90. (Refer to manual).
Hard starting, loss of power, smoking (indicative of wear or fuel/ignition system issues).
Hydraulic System Performance:
Slow or no hydraulic lift, inability to hold implements, external leaks.
📚 Vehicle History
Brand Heritage
Manufacturer Origin:
United Kingdom
Model Evolution
Production Period Mf35:
Introduced circa 1957.
Production Period Te20:
Preceded the MF35, produced from 1947-1956.
Production
Manufacturing Locations:
UK, Coventry, also produced under license in other countries.
🏆 Awards & Recognition
Recognitions
Historical Impact:
The TE-20 and its successors like the MF35 are considered some of the most influential and ubiquitous tractors of the 20th century, instrumental in mechanizing agriculture worldwide.
Bir seçim yapmanız sayfanın tamamının yenilenmesine neden olur.