Turbocharger inspection, seal replacement, wastegate adjustment
Troubleshooting Guides:
Diagnostic flowcharts for common problems (e.g., engine misfire, poor performance, starting issues)
Lubrication System Service:
Oil pump inspection, oil cooler service, apex seal lubrication specific procedures
Technical Depth
Depth:
Full mechanical and electrical system repair, including diagnostics and component-level troubleshooting, suitable for professional mechanics and experienced DIY enthusiasts.
📊 Manual Specifications
File Format
File Type:
PDF
Searchable Text:
Yes
Printable:
Yes
Resolution:
High-resolution scans/digital creation for clarity
Binding Type
Binding:
N/A (Digital Download)
Paper Type
Paper Quality:
N/A (Digital Download)
⚙️ Engine Specifications
Primary Engine
Engine Code:
13B
Engine Configuration:
Two-Rotor Wankel Rotary
Displacement Cc:
1308
Displacement Ci:
80
Performance
Horsepower Hp:
182
Horsepower Kw:
136
Torque Lb Ft:
183
Torque Nm:
248
Redline Rpm:
7500
Fuel System
Fuel Delivery:
Electronic Fuel Injection (EFI)
Fuel Type:
Unleaded Gasoline (Premium Recommended)
Ignition System
Ignition Type:
Distributorless Ignition System (DIS) with twin ignition coils per rotor
🔧 Transmission
Standard
Type:
5-Speed Manual (FS5W71C)
Optional
Type:
4-Speed Automatic
Features
Drive:
Rear-Wheel Drive (RWD)
📐 Dimensions
Exterior
Length Mm:
4375
Width Mm:
1715
Height Mm:
1295
Wheelbase Mm:
2500
Weights
Curb Weight Kg:
1320
🛡️ Safety Features
Ratings
NHTSA Frontal Impact:
Not rated (era specific)
IIHS Side Impact:
Not rated (era specific)
Active Features
ABS:
Anti-lock Braking System (ABS) available on some models/trims
Passive Features
Airbags:
Driver's side airbag (standard on most models)
Seatbelts:
3-point inertia-reel seatbelts
💡 Technology Features
Infotainment
Audio System:
Factory AM/FM stereo cassette player with optional CD player integration on later models.
Climate Control:
Manual climate control with optional automatic climate control on higher trims.
Driver Assistance
ABS:
Available Anti-lock Braking System for enhanced braking control.
Cruise Control:
Standard cruise control for highway driving.
Connectivity
Original Connectivity:
No integrated Bluetooth or smartphone connectivity; aftermarket solutions are common.
🔧 Maintenance
Service Intervals
Oil Change:
Every 3,000-5,000 miles or 3-6 months, depending on driving conditions. Consult manual for specific rotary oil recommendations.
Air Filter:
Inspect every 15,000 miles, replace as needed or every 30,000 miles.
Spark Plugs:
Platinum-tipped plugs recommended, replace every 30,000-60,000 miles. Specific rotary plug types are crucial.
Coolant Flush:
Every 2-3 years or 30,000-50,000 miles.
Fluid Specifications
Engine Oil:
API SG/SH or higher, Viscosity SAE 10W-30 or 10W-40 recommended (check manual for specific rotary engine oil requirements, often a specific blend is advised).
Transmission Fluid Manual:
API GL-4 or GL-5, SAE 75W-90 or 80W-90 gear oil.
Transmission Fluid Automatic:
Dexron II or equivalent.
Brake Fluid:
DOT 3 or DOT 4.
Coolant:
Ethylene Glycol based, 50/50 mix with distilled water.
Power Steering Fluid:
ATF Dexron II or equivalent.
Known Issues
Apex Seals:
Wear and failure of apex seals is a common concern with high-mileage rotary engines, leading to compression loss and poor performance. Regular oil changes and proper engine warm-up are crucial.
Oil Consumption:
Rotary engines inherently consume a small amount of oil, which is injected into the combustion chamber to lubricate seals. However, excessive consumption can indicate seal wear.
Turbo System:
Oil leaks, wastegate issues, and turbocharger bearing wear can occur with age and mileage.
Engine Mounts:
Rubber engine mounts can degrade over time, leading to increased vibration.
📚 Vehicle History
Brand Heritage
Mazda Rotary Development:
Mazda's long history and commitment to rotary engine technology, starting with the Cosmo.
Model Evolution
Rx7 Generations:
The FC generation (1985-1992) followed the SA22C/FB generation and preceded the FD generation. This generation marked a significant evolution in styling, performance, and technology.
Fc Facelift:
The 1989 model year represents the updated FC, often referred to as Series 5 in Japan, but the 'S4 Turbocharged 13B' designation likely refers to the Series 4 Turbocharged variant common in export markets.
Production
Production Years:
1985-1992 (FC Generation)
Manufacturing Location:
Japan
🏆 Awards & Recognition
Recognitions
Car And Driver Ten Best:
The RX-7 (FC generation) was named to Car and Driver's Ten Best list multiple times in the late 1980s.
Motor Trend Import Car Of The Year:
While not specifically awarded for the 1989 model year, the FC generation contributed to Mazda's growing reputation in performance automotive journalism.
Bir seçim yapmanız sayfanın tamamının yenilenmesine neden olur.