Yamaha FX Nytro FX10MTX 2008 Workshop Service Repair Manual
Normal fiyat
$133.00
İndirimli fiyat
$133.00
Normal fiyat
Birim fiyat
/ /
İndirim
Tükendi
🏷️ Basic Information Identification Make: Yamaha Model: FX Nytro MTX Year: 2008 Model Code: FX10MTX Product Type: Workshop Service Repair Manual 👋 Introduction Market Position Category: High-performance mountain snowmobile. Target Audience: Enthusiast riders seeking capability in deep snow and challenging terrain. Competitive Analysis Key Competitors: Arctic Cat M-Series, Ski-Doo Summit, Polaris RMK. Key Features Engine Type: Long-stroke, fuel-injected, 3-cylinder, 4-stroke. Suspension Design: ProMountain rear suspension designed for deep snow traction and articulation. Track Length: Long track (e.g., 153-inch or 162-inch) with deep lugs for off-trail performance. Chassis Design: Lightweight and rigid chassis optimized for maneuverability. 📋 Manual Details Coverage Areas Primary Coverage: Complete service, repair, and maintenance for the 2008 Yamaha FX Nytro MTX. Engine Coverage: Detailed procedures for engine disassembly, assembly, troubleshooting, and tuning. Drivetrain Coverage: Service and repair for the primary drive, secondary drive, and driven components. Suspension Coverage: Front and rear suspension system inspection, adjustment, and repair. Electrical Coverage: Wiring diagrams, electrical component testing, and troubleshooting. Body Chassis Coverage: Body panel removal, installation, and chassis component servicing. Page Count Estimated Pages: Approximately 300-500 pages (typical for comprehensive workshop manuals). Manual Type Type: Workshop Service Repair Manual Language Language: English Format Format: PDF Download 📖 Manual Coverage Systems Covered Powertrain: Engine, fuel system, ignition system, cooling system, exhaust system. Drivetrain: Primary drive clutch, secondary drive clutch, chain drive, driven sprocket. Suspension: Front A-arm suspension, rear independent suspension (ProMountain), shock absorbers, springs. Braking: Hydraulic disc brakes (front and rear), brake fluid, caliper service. Steering: Handlebar assembly, steering post, steering linkage. Electrical: Ignition system, lighting, battery, starter, ECU, sensors, wiring harnesses. Body And Frame: Body panels, seat, fuel tank, tunnel, chassis structure, running boards. Procedures Included Routine Maintenance: Oil changes, filter replacements, spark plug service, track inspection, chain adjustment. Troubleshooting: Diagnostic procedures for common and uncommon issues, symptom-based guides. Engine Repair: Top-end rebuilds, bottom-end assembly, valve adjustments, piston replacement. Transmission Repair: Clutch inspection, roller replacement, spring service, drive belt inspection and replacement. Suspension Repair: Shock absorber rebuild, spring replacement, bushing inspection and replacement. Electrical Diagnostics: Component testing using multimeters, continuity checks, voltage drop testing. Brake Service: Brake pad replacement, caliper service, brake fluid flush. Storage And Preparation: Procedures for seasonal storage and preparation for use. Technical Depth Depth: Comprehensive, suitable for professional technicians and experienced DIY mechanics. Diagnostics: Detailed diagnostic charts and troubleshooting trees. Rebuilds: Complete engine and component rebuild instructions with torque specifications. Specifications: Precise measurements, tolerances, and clearances for all components. 📊 Manual Specifications File Format Type: PDF Searchable: Yes (typically, depending on source scan quality) Printable: Yes Print Quality Image Resolution: High-resolution, clear diagrams and text. Binding Type Type: N/A (Digital PDF) Paper Type Type: N/A (Digital PDF) ⚙️ Engine Specifications Primary Engine Engine Type: 1049cc liquid-cooled, 4-stroke, DOHC, 5-valve, 3-cylinder. Bore X Stroke: 82.0 mm x 66.2 mm. Compression Ratio: 11.2:1 (typical). Performance Horsepower: Approximately 125-130 hp (manufacturer-claimed, may vary). Torque: Not explicitly stated, but strong low-end and mid-range torque is a key characteristic. Fuel System Induction: Fuel Injection (Yamaha Fuel Injection System - YFI). Fuel Type: Unleaded gasoline, 87 octane minimum recommended. Fuel Tank Capacity: Approx. 10 gallons (38 liters). Lubrication System: Dry sump lubrication. Oil Type: Yamalube 4 (or equivalent 10W-40 API SG or higher motorcycle oil). Ignition Type: Digital TCI (Transistor Controlled Ignition). Cooling System: Liquid-cooled. Coolant Type: Permanent type antifreeze (50/50 mix of ethylene glycol and distilled water). 🔧 Transmission Standard Type: CVT (Continuously Variable Transmission) with engine braking. Primary Clutch: Over-center clutch, adjustable weights and springs. Secondary Clutch: Dial-adjust clutch with adjustable spring and ramps. Features Drive Belt: Reinforced drive belt (specific Yamaha part number advised in manual). Gear Reduction: Internal gear reduction for final drive. 📐 Dimensions Exterior Overall Length: Approx. 125.2 inches (3180 mm). Overall Width: Approx. 47.2 inches (1200 mm). Overall Height: Approx. 47.2 inches (1200 mm). Ski Stance: Approx. 42.1 inches (1070 mm). Weights Dry Weight: Approx. 568 lbs (258 kg). Curb Weight: Not officially specified, but generally higher than dry weight. 🛡️ Safety Features Ratings Safety Certifications: CE, EPA, CARB compliant (depending on market). Active Features Braking System: Hydraulic disc brakes with ventilated rotors. Throttle Safety: Thumb throttle with a controlled return spring. Passive Features Ergonomics: Designed for rider control and stability in varied conditions. Handguards: Standard integrated handguards for wind and debris protection. 💡 Technology Features Infotainment Gauge Cluster: Digital/analog combination gauge cluster displaying speed, RPM, fuel level, engine temp, and diagnostic indicators. Driver Assistance Engine Management: Advanced ECU for optimal fuel delivery and ignition timing. Connectivity Charging System: 12V DC electrical system with charging coil for battery. 🔧 Maintenance Service Intervals Engine Oil Change: Every 1,000 miles (1600 km) or annually, whichever comes first. Oil Filter Change: At every engine oil change. Spark Plug Inspection: Every 600 miles (1000 km). Drive Belt Inspection: Every 1,000 miles (1600 km) or annually. Replace if damaged or...
Advanced ECU for optimal fuel delivery and ignition timing.
Connectivity
Charging System:
12V DC electrical system with charging coil for battery.
🔧 Maintenance
Service Intervals
Engine Oil Change:
Every 1,000 miles (1600 km) or annually, whichever comes first.
Oil Filter Change:
At every engine oil change.
Spark Plug Inspection:
Every 600 miles (1000 km).
Drive Belt Inspection:
Every 1,000 miles (1600 km) or annually. Replace if damaged or excessively worn.
Track Tension Adjustment:
Check and adjust as needed at every 600 miles (1000 km) or 100 operating hours.
Fluid Specifications
Engine Oil:
Yamalube 4 (10W-40, API SG or higher).
Brake Fluid:
DOT 4 hydraulic brake fluid.
Coolant:
50/50 mixture of ethylene glycol antifreeze and distilled water.
Known Issues
Clutch Wear:
Like many CVT systems, clutches can experience wear over time, especially with aggressive riding. Manual provides clutch inspection and adjustment procedures.
Suspension Bushings:
Bushings in the suspension can wear, leading to play. Regular inspection is recommended.
Track Sprocket Wear:
The track drive sprockets can wear, affecting track engagement. Manual details inspection and replacement.
Fuel Pump Reliability:
Early models of fuel-injected snowmobiles sometimes had minor fuel pump issues. Manual includes diagnostic steps.
📚 Vehicle History
Brand Heritage
Manufacturer:
Yamaha Motor Corporation, Japan.
Motorsports Focus:
Long history in motorcycles, marine engines, and snowmobiles, emphasizing performance and innovation.
Model Evolution
Nytro Introduction:
The Nytro line, introduced in the mid-2000s, marked Yamaha's significant entry into the 4-stroke mountain segment.
Fx10Mtx Significance:
The FX10MTX variant specifically targeted the deep snow mountain rider with extended track and specialized suspension.
Production
Production Era:
The Nytro platform was produced for several model years, with the 2008 model being a key iteration.
Manufacturing Location:
Yamaha snowmobiles are typically manufactured in Canada or the United States.
🏆 Awards & Recognition
Recognitions
Industry Reputation:
Yamaha's Nytro platform received praise for its strong 4-stroke power and mountain capability upon its release.
Ratings
Performance Reviews:
Consistently rated highly by industry publications for its engine performance and chassis handling in deep snow.
Certifications
Emissions:
Compliant with relevant emissions standards for its model year and market.
Bir seçim yapmanız sayfanın tamamının yenilenmesine neden olur.