Original Illustrated Factory Operating Instructions (User Manual) for Linde Electric Reach Truck Type 115-11/12.

Original factory manuals for Linde Forklift Trucks, contains high quality images, circuit diagrams and instructions to help you to operate and repair your truck

Covered models:
R10C-11
R12C-11
R14-12
R14C-11
R14HD-12
R14N-12
R16-12
R16HD-12
R16N-12
R20-12
R20N-12

Format: PDF, 212 Pages, Printable
Language: English

Contents:
1. Introduction and general description
Introduction
Legal requirements for placingonthemarket
General description
2. Safety
Operator safety guidelines
Residual risks
Stability
In the event of tip-over
Noise emission levels
Frequency characteristic for human body vibrations
3. Getting to know the truck
Location of identification plates and labels
Truck type/capacityplate
General view of truck
Operating controls and indicators
Operators display
Lift height indicator (LHI)
Definition of direction of travel
4. Operation
Running-in instructions
Pre-shift checks
The battery
Operator adjustments
Braking twin pedal
Braking single pedal
Driving twinpedal
Driving single pedal
Travellingincline
Operating the mast and attachments (with two joystick control)
Operating the mast and attachments (with four joystick control)
Handling loads
Before leaving the truck
Cold store cabin
Ambient temperature cabin
360° Steering (Option)
Opposite direction steering (Option)
Height pre-selector - LPS (option)
Operator code entry (Option)
Data Logger (Option)
Truck data management LFM (Option)
Side guidance for drive-in racking
Closed circuit television
5. Maintenance
Maintenance safety guidelines
Report of Thorough Examination
Covers and cowlings
Fuses
Emergency lower
Emergency steering andparking brake release
Slinging the truck
Securing for transportation
Jacking the truck
Towing procedure
Mast unit
Securing the mast against tilting (Compact version)
Recommended lubricants
Inspection and maintenance data
Inspection and maintenance schedule
Routine inspection and maintenance
Pre-shift checks
Inspection and maintenance as required
Inspection and maintenance every 1000 hours (250 hours cold store version)
Inspection and maintenance every 2000 hours (1000 hours cold store version)
Inspection and maintenance every 5000 hours (2500 hours cold store version)
Inspection and maintenance every 10000 hours or 5 years, whichever is earlier (5000
hour or 30 months cold store version)
Inspection and maintenance as required
Clean the truck
Check the battery electrolyte level and specific gravity
Lubricate the lift chains and mast channels
Adjust the lift chains
Replace the hydraulic hosesandpipes
Check the drive wheel nuts
Replace the battery trolley slides
1000 hr Inspection and maintenance (250 hr cold store)
Check the condition and security of the wheels and tyres
Check the condition of the battery and battery cables
Check the condition and security of electrical connections and cables
Check the parking brake gap
Check the hydraulic hoses and pipes for damage
Check the lift chains forcondition and security
Lubricate the mast, mast rollers, lift chains and chain pulleys
Lubricate the mast hose pulley assemblies (coldstoreonly)
Lubricate the reach channels and rollers
Check and lubricate the battery trolley slides and associated mechanism
Check the hydraulic oil level
Lubricate the fork carriage and sideshift slider pad
Check and lubricate the sideshift mechanism (Option on compact version)
Check the pre-tension of the double hoses (Compact version)
Lubricate the mast pivots (Compactversion)
Check the mast securing bolts (Compactversion)
Check condition of side guide rollers (option)
Lubricate cold storecab hinges and door latch (option)
2000 hr Inspection and maintenance (1000 hr cold store)
Check the brake fluid level
Check the load wheel brake shoes for wear
Replacethehydraulictankbreatherfilter
Checkthereachcarriagerollers,adjustifrequired
5000 hr Inspection and maintenance (2500 hr cold store)
Grease the load wheel bearings
Check condition of brake pipes
Change the hydraulic oil and suction filter
10000 hr Inspection and maintenance (5000 hr cold store)
Change the brake fluid
Taking the truck out of operation
Decommissioning the truck
6. Technical data
Battery data
Dimensions
Technical data 14 tonne capacity
Technical data 14 tonne capacity (heavy duty)
Technical data 14 tonne capacity (narrow chassis)
Technical data 16 tonne capacity
Technical data 16 tonne capacity (heavy duty)
Technical data 16 tonne capacity (narrow chassis)
Technical data 20 tonne capacity
Technical data 20 tonne capacity (narrow chassis)
Mast variations
Dimensions (compact version)
Technical data 10 tonne capacity (compact version)
Technical data 12tonne capacity (compact version)
Technical data 14 tonne capacity (compact version)
Mast variations (compact version)