International IH Cadet Special 85 Tractor All Service Repair Manual
้ๅธธไพกๆ ผ
$133.00
่ฒฉๅฃฒไพกๆ ผ
$133.00
้ๅธธไพกๆ ผ
ๅไพก
/ ใใใ
่ฒฉๅฃฒ
ๅฃฒใๅใ
๐ท๏ธ Basic Information Identification Make: International Harvester Model: Cadet Special 85 Vehicle Type: Tractor ๐ Introduction Market Position Target User: Owners, operators, and mechanics of the International IH Cadet Special 85 Tractor. Purpose: To provide in-depth technical information for the maintenance, repair, and troubleshooting of the specified tractor model. Competitive Analysis Value Proposition: Empowers users to perform repairs confidently, saving on labor costs and ensuring optimal tractor performance and longevity. Key Features Diagnostic Focus: Detailed troubleshooting sections address common issues specific to this tractor model. Repair Detail: Provides step-by-step instructions with illustrations (where applicable in original format) for a wide range of repair tasks. ๐ Manual Details Coverage Areas Manual Type: All Service Repair Manual Language: English Format: Downloadable Digital File ๐ Manual Coverage Systems Covered Engine Overhaul: Complete overhaul procedures, component identification, torque specifications, and assembly sequences. Fuel System: Carburetor adjustment and rebuild, fuel pump service, fuel line routing, and filter replacement. Ignition System: Spark plug specifications, timing procedures, coil and distributor service. Cooling System: Radiator service, thermostat replacement, fan belt adjustment, and coolant specifications. Electrical System: Wiring diagrams, generator/alternator service, starter motor repair, battery maintenance, and lighting circuits. Transmission And Drivetrain: Clutch service, gearbox overhaul, differential repair, PTO (Power Take-Off) engagement and disengagement mechanisms. Hydraulic System: Hydraulic pump service, cylinder repair, control valve adjustment, and fluid specifications. Steering System: Steering box adjustment, tie rod end replacement, and steering linkage service. Braking System: Brake shoe adjustment, drum service, and linkage maintenance. Front Axle And Steering: Kingpin service, spindle maintenance, and front wheel bearing adjustment. Rear Axle Assembly: Axle shaft removal, bearing service, and differential case inspection. Power Take Off Pto: PTO shaft service, clutch pack inspection, and engagement mechanism repair. Chassis And Frame: Frame inspection, mounting bolt torque values, and chassis component alignment. Sheet Metal And Bodywork: Fender removal and installation, hood latch adjustment, and grille mounting. Procedures Included Routine Maintenance: Oil changes, filter replacements, lubrication points, and pre-operation checks. Troubleshooting Guides: Diagnostic procedures for common problems with step-by-step solutions. Major Component Rebuilds: Detailed instructions for engine, transmission, and hydraulic system overhauls. Component Disassembly And Reassembly: Step-by-step guidance for removing, inspecting, repairing, and reassembling all major tractor parts. Adjustment Procedures: Precise instructions for adjusting clutch, brakes, engine timing, and hydraulic controls. Troubleshooting Charts: Organized tables to diagnose issues based on symptoms. Torque Specifications: Precise torque values for critical fasteners across all systems. Fluid Capacities And Types: Specific recommendations for engine oil, hydraulic fluid, transmission fluid, and coolant. Technical Depth Depth: Comprehensive, suitable for both experienced mechanics and DIY enthusiasts. Diagnostic Capabilities: Covers diagnostic procedures for electrical, mechanical, and hydraulic faults. Repair Level: Covers from minor adjustments to complete engine and transmission rebuilds. ๐ Manual Specifications File Format Format: PDF (Portable Document Format) Searchability: Likely searchable text content for efficient information retrieval. Print Quality Quality: Digital format allows for high-resolution viewing and printing of individual pages. Binding Type Binding: N/A (Digital Download) Paper Type Paper: N/A (Digital Download) Page Count Estimated Pages: Variable based on specific edition, typically 500+ pages for comprehensive repair manuals. โ๏ธ Engine Specifications Primary Engine Engine Manufacturer: International Harvester Engine Model: Likely a variant of the International Harvester C-series or a similar small displacement gasoline engine (specific model number would be in the manual). Engine Type: Gasoline, 2-cylinder, air-cooled or liquid-cooled (specific to exact configuration of Special 85). Displacement: Typically in the range of 70-120 cubic inches (exact value requires manual confirmation). Performance Horsepower: Approximately 10-20 PTO horsepower (subject to specific engine and configuration). Torque: Specifications to be detailed within the manual for optimal engine tuning. Fuel System Fuel Type: Gasoline Carburetor: Specific carburetor model and adjustment procedures will be detailed. ๐ง Transmission Standard Transmission Type: Manual transmission with multiple forward and reverse gears. Gear Selection: Likely a sliding gear type with a range selector. Features Clutch Type: Single dry plate clutch. Differential Lock: Optional or standard, manual will detail its operation and maintenance. ๐ Dimensions Exterior Wheelbase: Specific to the Cadet Special 85 model, details available in manual. Overall Length: Specific to the Cadet Special 85 model, details available in manual. Overall Width: Specific to the Cadet Special 85 model, details available in manual. Weights Operating Weight: Specific to the Cadet Special 85 model, details available in manual. ๐ก๏ธ Safety Features Ratings Safety Features Overview: Manual will detail standard safety features such as brake operation, PTO guards, and operator controls. Active Features Braking System Type: Mechanical drum brakes, manual will cover adjustment and maintenance. Passive Features Operator Station Design: Manual will explain the placement and function of controls for safe operation. ๐ก Technology Features Infotainment Infotainment System: N/A (Tractor of this era typically lacks modern infotainment systems). Driver Assistance Driver Assistance Features: N/A (Tractor of this era typically lacks modern driver-assistance features). Connectivity Connectivity Options: N/A (Tractor of this era typically lacks modern connectivity options)....
Hydraulic pump service, cylinder repair, control valve adjustment, and fluid specifications.
Steering System:
Steering box adjustment, tie rod end replacement, and steering linkage service.
Braking System:
Brake shoe adjustment, drum service, and linkage maintenance.
Front Axle And Steering:
Kingpin service, spindle maintenance, and front wheel bearing adjustment.
Rear Axle Assembly:
Axle shaft removal, bearing service, and differential case inspection.
Power Take Off Pto:
PTO shaft service, clutch pack inspection, and engagement mechanism repair.
Chassis And Frame:
Frame inspection, mounting bolt torque values, and chassis component alignment.
Sheet Metal And Bodywork:
Fender removal and installation, hood latch adjustment, and grille mounting.
Procedures Included
Routine Maintenance:
Oil changes, filter replacements, lubrication points, and pre-operation checks.
Troubleshooting Guides:
Diagnostic procedures for common problems with step-by-step solutions.
Major Component Rebuilds:
Detailed instructions for engine, transmission, and hydraulic system overhauls.
Component Disassembly And Reassembly:
Step-by-step guidance for removing, inspecting, repairing, and reassembling all major tractor parts.
Adjustment Procedures:
Precise instructions for adjusting clutch, brakes, engine timing, and hydraulic controls.
Troubleshooting Charts:
Organized tables to diagnose issues based on symptoms.
Torque Specifications:
Precise torque values for critical fasteners across all systems.
Fluid Capacities And Types:
Specific recommendations for engine oil, hydraulic fluid, transmission fluid, and coolant.
Technical Depth
Depth:
Comprehensive, suitable for both experienced mechanics and DIY enthusiasts.
Diagnostic Capabilities:
Covers diagnostic procedures for electrical, mechanical, and hydraulic faults.
Repair Level:
Covers from minor adjustments to complete engine and transmission rebuilds.
๐ Manual Specifications
File Format
Format:
PDF (Portable Document Format)
Searchability:
Likely searchable text content for efficient information retrieval.
Print Quality
Quality:
Digital format allows for high-resolution viewing and printing of individual pages.
Binding Type
Binding:
N/A (Digital Download)
Paper Type
Paper:
N/A (Digital Download)
Page Count
Estimated Pages:
Variable based on specific edition, typically 500+ pages for comprehensive repair manuals.
โ๏ธ Engine Specifications
Primary Engine
Engine Manufacturer:
International Harvester
Engine Model:
Likely a variant of the International Harvester C-series or a similar small displacement gasoline engine (specific model number would be in the manual).
Engine Type:
Gasoline, 2-cylinder, air-cooled or liquid-cooled (specific to exact configuration of Special 85).
Displacement:
Typically in the range of 70-120 cubic inches (exact value requires manual confirmation).
Performance
Horsepower:
Approximately 10-20 PTO horsepower (subject to specific engine and configuration).
Torque:
Specifications to be detailed within the manual for optimal engine tuning.
Fuel System
Fuel Type:
Gasoline
Carburetor:
Specific carburetor model and adjustment procedures will be detailed.
๐ง Transmission
Standard
Transmission Type:
Manual transmission with multiple forward and reverse gears.
Gear Selection:
Likely a sliding gear type with a range selector.
Features
Clutch Type:
Single dry plate clutch.
Differential Lock:
Optional or standard, manual will detail its operation and maintenance.
๐ Dimensions
Exterior
Wheelbase:
Specific to the Cadet Special 85 model, details available in manual.
Overall Length:
Specific to the Cadet Special 85 model, details available in manual.
Overall Width:
Specific to the Cadet Special 85 model, details available in manual.
Weights
Operating Weight:
Specific to the Cadet Special 85 model, details available in manual.
๐ก๏ธ Safety Features
Ratings
Safety Features Overview:
Manual will detail standard safety features such as brake operation, PTO guards, and operator controls.
Active Features
Braking System Type:
Mechanical drum brakes, manual will cover adjustment and maintenance.
Passive Features
Operator Station Design:
Manual will explain the placement and function of controls for safe operation.
๐ก Technology Features
Infotainment
Infotainment System:
N/A (Tractor of this era typically lacks modern infotainment systems).
Driver Assistance
Driver Assistance Features:
N/A (Tractor of this era typically lacks modern driver-assistance features).
Connectivity
Connectivity Options:
N/A (Tractor of this era typically lacks modern connectivity options).
๐ง Maintenance
Service Intervals
Engine Oil Change:
Typically every 50-100 operating hours or annually, as specified in the manual.
Oil Filter Replacement:
Concurrent with engine oil changes.
Air Filter Cleaning Or Replacement:
Regularly as needed based on operating conditions, detailed in manual.
Greasing Points:
Daily or weekly depending on usage, specific points and intervals in manual.
Fluid Specifications
Engine Oil Type:
API Service Classification SC, SD, or SE, SAE 30W or 10W-30 depending on temperature (manual will confirm exact spec).
Hydraulic Fluid Type:
IH Hy-Tran or equivalent, or specific agricultural hydraulic fluid (manual will specify).
Transmission Oil Type:
Likely SAE 90 gear oil or IH Hy-Tran (manual will specify exact type and capacity).
Coolant Type:
Ethylene glycol based antifreeze with corrosion inhibitors, 50/50 mix with distilled water (manual will confirm).
Known Issues
Common Wear Items:
Clutch wear, brake shoe adjustment, carburetor gumming due to old fuel, starter brush wear, and potential hydraulic seal leaks.
Electrical Gremlins:
Loose connections, corroded wiring, and aging starter/generator components can cause intermittent issues.
๐ Vehicle History
Brand Heritage
Manufacturer:
International Harvester (IH), a significant American manufacturer of agricultural machinery.
Model Evolution
Cadet Line:
The Cadet line represented IH's entry into the smaller, more consumer-oriented tractor market, evolving from earlier models.
Production
Production Era:
The Cadet Special 85 was produced during the 1960s, a period of significant growth and innovation in small tractors.
Manufacturing Location:
Primarily manufactured in the United States by International Harvester.
๐ Awards & Recognition
Recognitions
Industry Acclaim:
While specific awards for the Cadet Special 85 are unlikely, the International Harvester brand was highly regarded for its durable and reliable farm equipment during its production period.