Jeep Wrangler JK 3.0L 3.6L Complete Workshop Service Repair Manual 2015 2016 2017 2018

通常価格: $141.00
販売価格: $141.00
通常価格
単価: あたり

🏷️ Basic Information Identification Make: Jeep Model: Wrangler Platform Code: JK Product Name: Jeep Wrangler JK 3.0L 3.6L Complete Workshop Service Repair Manual 2015 2016 2017 2018 Model Years Covered: 2015, 2016, 2017, 2018 Engine Variants Covered: 3.0L (EcoDiesel V6), 3.6L (Pentastar V6) Trim Levels Covered: All Transmission Types Covered: All 👋 Introduction Market Position Vehicle Segment: Compact SUV, Off-road Vehicle Jeep Wrangler Jk Reputation: Iconic off-road capability, ruggedness, customization potential Competitive Analysis Key Competitors Jk Era: Toyota FJ Cruiser, Nissan Xterra, Land Rover Defender (where applicable) Key Features Manual Benefit 1: Enables significant cost savings on repairs and maintenance Manual Benefit 2: Empowers users with step-by-step instructions and visual aids Manual Benefit 3: Provides access to detailed technical information for all vehicle systems 📋 Manual Details Coverage Areas Overall Scope: Complete Service & Repair Procedure A-Z Maintenance Coverage: All routine maintenance procedures Repair Coverage: All repair procedures Diagnostics Coverage: Comprehensive diagnostic troubleshooting Page Count Estimated Page Count: High (Specific count not provided, but implies comprehensive coverage typical of factory service manuals) Manual Type Type: Workshop Service Repair Manual Purpose: DIY repairs, professional service and maintenance Language Language: English Format Format: Digital Downloadable (PDF) Accessibility: Printable (individual pages or entire manual), Viewable on PC, MAC, tablets, smartphones Software Requirement: Adobe Reader (free) Delivery Delivery Method: Instant Email Delivery Guarantee Customer Satisfaction: Guaranteed 📖 Manual Coverage Systems Covered Engine Mechanical: Engine assembly, cylinder head, block, pistons, crankshaft, camshafts, timing system, lubrication system, cooling system, intake and exhaust manifolds Engine Performance: Fuel injection system, ignition system, emissions control systems (EVAP, EGR) Transmission Manual: Manual transmission (e.g., NV3550, NSG370), clutch system, shifter assembly, transfer case Transmission Automatic: Automatic transmission (e.g., W5A580), torque converter, transmission control module (TCM), shift linkage, cooling lines Drivetrain: Front axle, rear axle, drive shafts, universal joints, differentials (Dana 30, Dana 44), locking differentials (if equipped) Suspension: Front suspension (coil springs, solid axle, control arms, track bar), rear suspension (coil springs, solid axle, control arms, track bar), shocks, springs, bushings Steering: Power steering system, steering gear, steering column, steering linkage (tie rods, drag link), steering damper Brakes: Front and rear brake systems (disc brakes), ABS system, parking brake system, brake lines, master cylinder, calipers, rotors, pads Electrical System: Battery, charging system (alternator), starting system (starter), lighting system (headlights, taillights, interior lights), fuse block, relays, wiring diagrams Body And Chassis: Body panels, doors, hood, tailgate, bumpers, frame, convertible top system, interior trim, seats HVAC: Heating, ventilation, and air conditioning (HVAC) system, refrigerant, compressor, evaporator, heater core Infotainment And Electronics: Radio, speakers, navigation system (if equipped), climate control interface, power windows, power locks, power mirrors Procedures Included Scheduled Maintenance: Oil changes, fluid checks and replacement, filter replacement (air, oil, fuel, cabin), tire rotation, brake inspection Engine Repair: Engine tune-ups, component replacement (spark plugs, coils, belts, hoses), head gasket replacement, internal engine component rebuild Transmission Service: Transmission fluid and filter change, transmission rebuild, clutch replacement, transfer case service Brake Service: Brake pad and rotor replacement, brake caliper service, brake fluid flush, parking brake adjustment Suspension And Steering Repair: Component replacement (shocks, springs, control arms, tie rods), alignment procedures, power steering pump and rack replacement Electrical Troubleshooting: Wiring diagram interpretation, circuit testing, component diagnosis and replacement (alternator, starter, sensors) Body And Interior Repair: Panel repair/replacement, door hinge adjustment, convertible top repair, interior trim removal/installation HVAC Service: Refrigerant recharge, component replacement (compressor, expansion valve), blower motor replacement Diagnostic Procedures: OBD-II (On-Board Diagnostics) troubleshooting, diagnostic trouble code (DTC) explanations, guided troubleshooting flowcharts Technical Depth Depth: Comprehensive (suitable for professional mechanics and advanced DIYers) Details Provided: Step-by-step instructions, detailed illustrations and diagrams, torque specifications, diagnostic charts, component removal and installation procedures 📊 Manual Specifications File Format Primary Format: PDF Searchability: Likely searchable text-based PDF for easy keyword access Print Quality Quality: High quality (as stated in product description) Binding Type Binding: N/A (Digital Download) Paper Type Paper: N/A (Digital Download) ⚙️ Engine Specifications Primary Engine 3.6L Engine Name: Pentastar V6 Displacement: 3.6 Liters (3604 cc) Configuration: 60-degree V6, SOHC (Single Overhead Camshaft) with VVT (Variable Valve Timing) Horsepower 3.6L: Approximately 285 hp @ 6400 rpm Torque 3.6L: Approximately 260 lb-ft @ 4800 rpm Fuel System 3.6L: Sequential Multi-Port Fuel Injection (MPI) Bore X Stroke 3.6L: 96.0 mm x 83.0 mm Compression Ratio 3.6L: 10.5:1 Engine Management System: NGC (Next-Gen Controller) or similar Chrysler/FCA ECU Secondary Engine 3.0L Engine Name: EcoDiesel V6 (VM Motori A630 / L64) Displacement: 3.0 Liters (2987 cc) Configuration: 60-degree V6, DOHC (Double Overhead Camshaft), Turbocharged, Common Rail Diesel Injection (CRDI) Horsepower 3.0L: Approximately 240 hp @ 3600 rpm Torque 3.0L: Approximately 442 lb-ft @ 1600-2600 rpm Fuel System 3.0L: High-pressure Common Rail Diesel Injection Turbocharger: Variable Geometry Turbocharger (VGT) Emission Controls 3.0L: Diesel Oxidation Catalyst (DOC), Diesel Particulate Filter (DPF), Selective Catalytic Reduction (SCR) with Diesel Exhaust Fluid (DEF) injection 🔧 Transmission Standard...

26 people are viewing this right now

Type: Car

Sku: 513558

Collections: ALL Featured Jeep

Availability: In stock

Tags: 2015 2016 2017 2018 Car Cars Featured Jeep Wrangler Wrangler JK

商品バリエーション

Description

🏷️ Basic Information

Identification

Make:

Model:

Wrangler

Platform Code:

Product Name:

Jeep Wrangler JK 3.0L 3.6L Complete Workshop Service Repair Manual 2015 2016 2017 2018

Model Years Covered:

2015, 2016, 2017, 2018

Engine Variants Covered:

3.0L (EcoDiesel V6), 3.6L (Pentastar V6)

Trim Levels Covered:

Transmission Types Covered:

👋 Introduction

Market Position

Vehicle Segment:

Compact SUV, Off-road Vehicle

Jeep Wrangler Jk Reputation:

Iconic off-road capability, ruggedness, customization potential

Competitive Analysis

Key Competitors Jk Era:

Toyota FJ Cruiser, Nissan Xterra, Land Rover Defender (where applicable)

Key Features

Manual Benefit 1:

Enables significant cost savings on repairs and maintenance

Manual Benefit 2:

Empowers users with step-by-step instructions and visual aids

Manual Benefit 3:

Provides access to detailed technical information for all vehicle systems

📋 Manual Details

Coverage Areas

Overall Scope:

Complete Service & Repair Procedure A-Z

Maintenance Coverage:

All routine maintenance procedures

Repair Coverage:

All repair procedures

Diagnostics Coverage:

Comprehensive diagnostic troubleshooting

Page Count

Estimated Page Count:

High (Specific count not provided, but implies comprehensive coverage typical of factory service manuals)

Manual Type

Type:

Workshop Service Repair Manual

Purpose:

DIY repairs, professional service and maintenance

Language

Language:

English

Format

Format:

Digital Downloadable (PDF)

Accessibility:

Printable (individual pages or entire manual), Viewable on PC, MAC, tablets, smartphones

Software Requirement:

Adobe Reader (free)

Delivery

Delivery Method:

Instant Email Delivery

Guarantee

Customer Satisfaction:

Guaranteed

📖 Manual Coverage

Systems Covered

Engine Mechanical:

Engine assembly, cylinder head, block, pistons, crankshaft, camshafts, timing system, lubrication system, cooling system, intake and exhaust manifolds

Engine Performance:

Fuel injection system, ignition system, emissions control systems (EVAP, EGR)

Transmission Manual:

Manual transmission (e.g., NV3550, NSG370), clutch system, shifter assembly, transfer case

Transmission Automatic:

Automatic transmission (e.g., W5A580), torque converter, transmission control module (TCM), shift linkage, cooling lines

Drivetrain:

Front axle, rear axle, drive shafts, universal joints, differentials (Dana 30, Dana 44), locking differentials (if equipped)

Suspension:

Front suspension (coil springs, solid axle, control arms, track bar), rear suspension (coil springs, solid axle, control arms, track bar), shocks, springs, bushings

Steering:

Power steering system, steering gear, steering column, steering linkage (tie rods, drag link), steering damper

Brakes:

Front and rear brake systems (disc brakes), ABS system, parking brake system, brake lines, master cylinder, calipers, rotors, pads

Electrical System:

Battery, charging system (alternator), starting system (starter), lighting system (headlights, taillights, interior lights), fuse block, relays, wiring diagrams

Body And Chassis:

Body panels, doors, hood, tailgate, bumpers, frame, convertible top system, interior trim, seats

HVAC:

Heating, ventilation, and air conditioning (HVAC) system, refrigerant, compressor, evaporator, heater core

Infotainment And Electronics:

Radio, speakers, navigation system (if equipped), climate control interface, power windows, power locks, power mirrors

Procedures Included

Scheduled Maintenance:

Oil changes, fluid checks and replacement, filter replacement (air, oil, fuel, cabin), tire rotation, brake inspection

Engine Repair:

Engine tune-ups, component replacement (spark plugs, coils, belts, hoses), head gasket replacement, internal engine component rebuild

Transmission Service:

Transmission fluid and filter change, transmission rebuild, clutch replacement, transfer case service

Brake Service:

Brake pad and rotor replacement, brake caliper service, brake fluid flush, parking brake adjustment

Suspension And Steering Repair:

Component replacement (shocks, springs, control arms, tie rods), alignment procedures, power steering pump and rack replacement

Electrical Troubleshooting:

Wiring diagram interpretation, circuit testing, component diagnosis and replacement (alternator, starter, sensors)

Body And Interior Repair:

Panel repair/replacement, door hinge adjustment, convertible top repair, interior trim removal/installation

HVAC Service:

Refrigerant recharge, component replacement (compressor, expansion valve), blower motor replacement

Diagnostic Procedures:

OBD-II (On-Board Diagnostics) troubleshooting, diagnostic trouble code (DTC) explanations, guided troubleshooting flowcharts

Technical Depth

Depth:

Comprehensive (suitable for professional mechanics and advanced DIYers)

Details Provided:

Step-by-step instructions, detailed illustrations and diagrams, torque specifications, diagnostic charts, component removal and installation procedures

📊 Manual Specifications

File Format

Primary Format:

Searchability:

Likely searchable text-based PDF for easy keyword access

Print Quality

Quality:

High quality (as stated in product description)

Binding Type

Binding:

N/A (Digital Download)

Paper Type

Paper:

N/A (Digital Download)

⚙️ Engine Specifications

Primary Engine 3.6L

Engine Name:

Pentastar V6

Displacement:

3.6 Liters (3604 cc)

Configuration:

60-degree V6, SOHC (Single Overhead Camshaft) with VVT (Variable Valve Timing)

Horsepower 3.6L:

Approximately 285 hp @ 6400 rpm

Torque 3.6L:

Approximately 260 lb-ft @ 4800 rpm

Fuel System 3.6L:

Sequential Multi-Port Fuel Injection (MPI)

Bore X Stroke 3.6L:

96.0 mm x 83.0 mm

Compression Ratio 3.6L:

10.5:1

Engine Management System:

NGC (Next-Gen Controller) or similar Chrysler/FCA ECU

Secondary Engine 3.0L

Engine Name:

EcoDiesel V6 (VM Motori A630 / L64)

Displacement:

3.0 Liters (2987 cc)

Configuration:

60-degree V6, DOHC (Double Overhead Camshaft), Turbocharged, Common Rail Diesel Injection (CRDI)

Horsepower 3.0L:

Approximately 240 hp @ 3600 rpm

Torque 3.0L:

Approximately 442 lb-ft @ 1600-2600 rpm

Fuel System 3.0L:

High-pressure Common Rail Diesel Injection

Turbocharger:

Variable Geometry Turbocharger (VGT)

Emission Controls 3.0L:

Diesel Oxidation Catalyst (DOC), Diesel Particulate Filter (DPF), Selective Catalytic Reduction (SCR) with Diesel Exhaust Fluid (DEF) injection

🔧 Transmission

Standard Transmission 3.6L

Type:

6-speed manual transmission (e.g., NSG370)

Optional Transmission 3.6L

Type:

5-speed automatic transmission (e.g., W5A580)

Standard Transmission 3.0L

Type:

5-speed automatic transmission (e.g., W5A580)

Features

Transfer Case:

Command-Trac NV241GII or Rock-Trac NV241OR (depending on trim/options)

Gear Ratios Manual:

Detailed ratios available in manual

Gear Ratios Automatic:

Detailed ratios available in manual

Fluid Specifications

Manual Transmission Fluid:

Refer to manual for specific Mopar or equivalent fluid (e.g., NV 3550 often used Mopar Manual Transmission Lubricant)

Automatic Transmission Fluid:

Mopar ATF+4 or equivalent (specific to W5A580)

📐 Dimensions

Exterior 2 Door

Length:

Approx. 173.4 inches (4404 mm)

Exterior 4 Door

Length:

Approx. 184.7 inches (4691 mm)

Exterior

Width Body:

Approx. 73.7 inches (1872 mm)

Height:

Approx. 72.1 inches (1831 mm)

Wheelbase 2 Door:

Approx. 95.4 inches (2423 mm)

Wheelbase 4 Door:

Approx. 116.0 inches (2947 mm)

Weights

Curb Weight 2 Door:

Approx. 4,100 - 4,400 lbs (1860 - 2000 kg)

Curb Weight 4 Door:

Approx. 4,400 - 4,800 lbs (2000 - 2177 kg)

Dimensions

Ground Clearance:

Up to 10.2 inches (259 mm)

Approach Angle:

Approx. 42.2 degrees

Departure Angle:

Approx. 37.2 degrees

Breakover Angle:

Approx. 21.4 degrees (2-door), 22.2 degrees (4-door)

Wheel Bolt Pattern:

5x127 mm (5x5 inches)

Tire Sizes Standard:

Typically P255/75R17, LT255/75R17, or similar off-road focused tires

🛡️ Safety Features

Ratings

NHTSA Rollover Rating:

4-star (typical for 2-door and 4-door models)

IIHS Crash Test Results:

Varies by specific test and year, generally good frontal/side impacts but can be susceptible to roof strength limitations without proper support.

Active Features

Electronic Stability Control:

Standard (ESC/Traction Control)

Antilock Brakes:

Standard (ABS)

Trailer Sway Control:

Available/Standard depending on configuration

Passive Features

Airbags:

Front occupant airbags, available side-curtain airbags (standard on 4-door models)

Seatbelts:

3-point seatbelts with pretensioners

Rollover Protection:

Reinforced windshield frame, integrated sport bar/roll cage structure

💡 Technology Features

Infotainment 2015-2018

Uconnect Systems:

Available Uconnect systems ranging from 130 (basic radio) to 430N (touchscreen with navigation) and 730N (premium touchscreen with navigation).

Audio Systems:

Standard 8-speaker audio, optional Alpine premium audio system

Driver Assistance

Availability:

Limited driver-assistance features typical for this generation and vehicle type, focusing on core functionality.

Features Available:

Hill Start Assist, Electronic Roll Mitigation (ERM), Traction Control, Stability Control

Connectivity

Bluetooth:

Available Bluetooth connectivity for hands-free calling and audio streaming on equipped Uconnect systems

Usb Aux:

Available USB and Auxiliary input jacks for media devices

🔧 Maintenance

Service Intervals 3.6L Pentastar

Oil Change Interval:

Every 10,000 miles (16,000 km) or 12 months, whichever comes first (using synthetic oil)

Air Filter Replacement:

Every 30,000 miles (48,000 km) or as needed based on inspection

Engine Coolant Change:

Initial change at 100,000 miles (160,000 km), then every 50,000 miles (80,000 km)

Spark Plug Replacement:

Typically every 100,000 miles (160,000 km) with iridium-tipped plugs

Service Intervals 3.0L Ecodiesel

Oil Change Interval:

Every 10,000 miles (16,000 km) or 12 months, whichever comes first (using diesel-specific synthetic oil)

Fuel Filter Replacement:

Refer to manual, typically around 20,000-30,000 miles (32,000-48,000 km)

Def Fluid Refill:

As needed; refill when indicator light illuminates or based on vehicle prompts.

Fluid Specifications

Engine Oil 3.6L:

SAE 0W-20 Full Synthetic (Mopar or equivalent meeting Chrysler MS-6395)

Engine Oil 3.0L:

SAE 5W-30 Full Synthetic Diesel Engine Oil (meeting API CK-4 or CJ-4 specifications, and Chrysler MS-10838)

Coolant:

Mopar OAT (Organic Additive Technology) 5-Year/100,000 Mile Coolant or equivalent meeting Chrysler MS-9769 (typically pink)

Brake Fluid:

DOT 3

Known Issues 3.6L Pentastar

Issue 1 3.6L:

Oil filter adapter housing leaks

Issue 2 3.6L:

Coolant leaks from hoses or water pump

Known Issues 3.0L Ecodiesel

Issue 1 3.0L:

Diesel Particulate Filter (DPF) regeneration issues, especially with short trips

Issue 2 3.0L:

Potential for EGR system issues

Common Maintenance Items

Transfer Case Fluid:

Refer to manual; typically requires specific gear oil.

Axle Fluid:

Refer to manual; typically SAE 75W-90 or 75W-140 synthetic gear oil with limited-slip additive if equipped with Trac-Lok differentials.

📚 Vehicle History

Brand Heritage

Jeep Origin:

Roots in World War II military vehicles (Willys MB)

Jeep Legacy:

Longstanding reputation for off-road capability and ruggedness

Model Evolution Jk

Jk Generation Introduction:

Introduced for the 2007 model year, replacing the TJ generation

Jk Facelift Year:

Significant update for the 2011 model year, including the Pentastar engine introduction

Jk Production End:

Succeeded by the JL generation for the 2018 model year in North America, though some markets may have continued JK production slightly longer.

Production

Manufacturing Location:

Toledo, Ohio, USA (Toledo Complex)

🏆 Awards & Recognition

Recognitions

Off Road Awards:

Consistently recognized by off-road publications and enthusiasts for its trail capability.

Jeep Wrangler Jk Popularity:

High resale value and strong aftermarket support contribute to its enduring popularity.

Ratings

Consumer Reports Ratings:

Often receives mixed reviews regarding predicted reliability, but excels in owner satisfaction for capability.