Mini 1275 GT 1969-1980 Service Repair Workshop Manual
้ๅธธไพกๆ ผ
$133.00
่ฒฉๅฃฒไพกๆ ผ
$133.00
้ๅธธไพกๆ ผ
ๅไพก
/ ใใใ
่ฒฉๅฃฒ
ๅฃฒใๅใ
๐ท๏ธ Basic Information Identification Make: Mini Model: 1275 GT Product Name: Mini 1275 GT 1969-1980 Service Repair Workshop Manual Generation Production Years: 1969-1980 Codes Engine Code Variant: 1275cc OHV Inline-4 ๐ Introduction Market Position Target Audience: Mini 1275 GT owners (DIY enthusiasts with basic mechanical skills) and independent auto service professionals. Competitive Analysis Value Proposition: Provides dealership-level technical information, enabling cost savings on maintenance and repairs. Equips owners to better understand and communicate with technicians. Key Features Accuracy: Vehicle-specific, not generic. Contains exact same information used by authorized dealer service departments. Content Detail: Step-by-step instructions, diagrams, illustrations, wiring schematics, and specifications. Usability: Accurate, clear, concise text combined with illustrations makes it easy for users with basic mechanical knowledge. Completeness: Complete and intact, without missing or corrupt parts/pages. ๐ Manual Details Coverage Areas Covered Years: 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980 Page Count Estimated Page Count: Extensive (Specific number not provided, but described as 'full service and repair instruction' and 'complete') Manual Type Type: Service Repair Workshop Manual Language Language: English Format Digital Format: PDF ๐ Manual Coverage Systems Covered Engine Mechanical: Full overhaul, repair, and troubleshooting of the 1275cc engine. Engine Electrical: Ignition system, charging system, starting system, lighting, and all associated wiring. Emission Control: Details on emission control systems relevant to the period. Fuel System: Carburetor (likely SU or Zenith-Stromberg), fuel pump, fuel lines, and tank. Clutch: Service and repair of the clutch assembly and hydraulic system. Manual Transmission: Complete service, repair, and overhaul of the gearbox. Automatic Transmission: Service and repair for models equipped with automatic transmission (less common for 1275 GT, but potentially covered). Driveshaft Axle: Components related to power delivery to the wheels. Suspension: Front and rear suspension, including hydrolastic system (if applicable) or conventional coil springs. Steering: Steering rack, linkages, and column. Brakes: Hydraulic system, brake lines, calipers/drums, master cylinder, and servo (if fitted). Body Interior Exterior: Bodywork repair, panel replacement, trim, glass, and seals. Body Electrical: Lighting, wipers, horn, instruments, and other body-mounted electrical components. HVAC: Heating system, ventilation, and potential air conditioning components (less common for the era). Procedures Included Maintenance: Scheduled maintenance, oil changes, fluid top-ups, filter replacements. Troubleshooting: Diagnostic procedures for identifying common faults and issues. Repair: Step-by-step instructions for component removal, repair, and reassembly. Diagnostics: Fault finding for electrical and mechanical systems. Wiring Schematics: Detailed electrical wiring diagrams for all systems. Technical Depth Depth: Comprehensive: Covers basic maintenance to complete engine and transmission rebuilds, suitable for both DIY enthusiasts and professional mechanics. ๐ Manual Specifications File Format Compatibility: All Versions of Windows and Mac Print Quality Printability: Yes, all pages are printable. Binding Type Binding: Not Applicable (Digital PDF) Paper Type Paper Quality: Not Applicable (Digital PDF) Requirements Software: Adobe PDF Reader โ๏ธ Engine Specifications Primary Engine Displacement: 1275cc (77.8 cubic inches) Configuration: Overhead Valve (OHV) Inline-4 Performance Horsepower Est: Approximately 55-65 bhp (varies by tuning and specific year/carburetion). Torque Est: Approximately 68-75 lb-ft (varies). Fuel System Carburetion: Typically single SU HS4 or Hif4, or Zenith-Stromberg CD series carburetor. Fuel Type: Unleaded gasoline (likely requiring lead additive or hardened valve seats for earlier models if not factory converted). ๐ง Transmission Standard Type: 4-speed manual transaxle (all gears synchromesh). Optional Type: Automatic transmission (less common on the 1275 GT, but potentially available on some variants). Features Gear Ratios: Specific ratios are detailed within the manual, typically geared for spirited performance. ๐ Dimensions Exterior Length: Approximately 3050 mm (120.1 inches) Width: Approximately 1400 mm (55.1 inches) Height: Approximately 1250 mm (49.2 inches) Weights Curb Weight: Around 600-650 kg (1320-1430 lbs) ๐ก๏ธ Safety Features Ratings Crash Test Era: Safety standards were significantly different during this production period; no modern standardized ratings apply. Active Features Brakes: Front disc brakes, rear drum brakes. Self-adjusting mechanisms detailed. Passive Features Seatbelts: Provisions and installation details for lap belts (three-point belts may have been optional or aftermarket). Construction: Monocoque body construction providing structural integrity. ๐ก Technology Features Infotainment Features: Basic dashboard instrumentation: speedometer, fuel gauge, temperature gauge, oil pressure warning light, ammeter. Radio and heater are optional extras and not standard. Driver Assistance Features: No electronic driver assistance features were available during this period. Focus is on mechanical systems. Connectivity Features: No factory-fitted connectivity features. ๐ง Maintenance Service Intervals Oil Change: Typically every 3,000 miles or 6 months (specific recommendation in manual). Ignition Tune Up: Regular checks of spark plugs, distributor points, and condenser as per manual. Points require periodic gap adjustment. Fluid Specifications Engine Oil: Refer to manual for specific viscosity (e.g., 20W-50 or 10W-40 depending on season/condition). Early Minis often used straight-weight oils. Coolant: Glycol-based antifreeze mixed with distilled water. Capacity and type specified in manual. Brake Fluid: DOT 3 or DOT 4 hydraulic brake fluid. Regular flushing and replacement recommended. Gearbox Oil: Specific manual transmission fluid or EP (Extreme...
Mini 1275 GT 1969-1980 Service Repair Workshop Manual
Generation
Production Years:
1969-1980
Codes
Engine Code Variant:
1275cc OHV Inline-4
๐ Introduction
Market Position
Target Audience:
Mini 1275 GT owners (DIY enthusiasts with basic mechanical skills) and independent auto service professionals.
Competitive Analysis
Value Proposition:
Provides dealership-level technical information, enabling cost savings on maintenance and repairs. Equips owners to better understand and communicate with technicians.
Key Features
Accuracy:
Vehicle-specific, not generic. Contains exact same information used by authorized dealer service departments.
Content Detail:
Step-by-step instructions, diagrams, illustrations, wiring schematics, and specifications.
Usability:
Accurate, clear, concise text combined with illustrations makes it easy for users with basic mechanical knowledge.
Completeness:
Complete and intact, without missing or corrupt parts/pages.
Diagnostic procedures for identifying common faults and issues.
Repair:
Step-by-step instructions for component removal, repair, and reassembly.
Diagnostics:
Fault finding for electrical and mechanical systems.
Wiring Schematics:
Detailed electrical wiring diagrams for all systems.
Technical Depth
Depth:
Comprehensive: Covers basic maintenance to complete engine and transmission rebuilds, suitable for both DIY enthusiasts and professional mechanics.
๐ Manual Specifications
File Format
Compatibility:
All Versions of Windows and Mac
Print Quality
Printability:
Yes, all pages are printable.
Binding Type
Binding:
Not Applicable (Digital PDF)
Paper Type
Paper Quality:
Not Applicable (Digital PDF)
Requirements
Software:
Adobe PDF Reader
โ๏ธ Engine Specifications
Primary Engine
Displacement:
1275cc (77.8 cubic inches)
Configuration:
Overhead Valve (OHV) Inline-4
Performance
Horsepower Est:
Approximately 55-65 bhp (varies by tuning and specific year/carburetion).
Torque Est:
Approximately 68-75 lb-ft (varies).
Fuel System
Carburetion:
Typically single SU HS4 or Hif4, or Zenith-Stromberg CD series carburetor.
Fuel Type:
Unleaded gasoline (likely requiring lead additive or hardened valve seats for earlier models if not factory converted).
๐ง Transmission
Standard
Type:
4-speed manual transaxle (all gears synchromesh).
Optional
Type:
Automatic transmission (less common on the 1275 GT, but potentially available on some variants).
Features
Gear Ratios:
Specific ratios are detailed within the manual, typically geared for spirited performance.
๐ Dimensions
Exterior
Length:
Approximately 3050 mm (120.1 inches)
Width:
Approximately 1400 mm (55.1 inches)
Height:
Approximately 1250 mm (49.2 inches)
Weights
Curb Weight:
Around 600-650 kg (1320-1430 lbs)
๐ก๏ธ Safety Features
Ratings
Crash Test Era:
Safety standards were significantly different during this production period; no modern standardized ratings apply.
Active Features
Brakes:
Front disc brakes, rear drum brakes. Self-adjusting mechanisms detailed.
Passive Features
Seatbelts:
Provisions and installation details for lap belts (three-point belts may have been optional or aftermarket).
Construction:
Monocoque body construction providing structural integrity.
๐ก Technology Features
Infotainment
Features:
Basic dashboard instrumentation: speedometer, fuel gauge, temperature gauge, oil pressure warning light, ammeter. Radio and heater are optional extras and not standard.
Driver Assistance
Features:
No electronic driver assistance features were available during this period. Focus is on mechanical systems.
Connectivity
Features:
No factory-fitted connectivity features.
๐ง Maintenance
Service Intervals
Oil Change:
Typically every 3,000 miles or 6 months (specific recommendation in manual).
Ignition Tune Up:
Regular checks of spark plugs, distributor points, and condenser as per manual. Points require periodic gap adjustment.
Fluid Specifications
Engine Oil:
Refer to manual for specific viscosity (e.g., 20W-50 or 10W-40 depending on season/condition). Early Minis often used straight-weight oils.
Coolant:
Glycol-based antifreeze mixed with distilled water. Capacity and type specified in manual.
Brake Fluid:
DOT 3 or DOT 4 hydraulic brake fluid. Regular flushing and replacement recommended.
Gearbox Oil:
Specific manual transmission fluid or EP (Extreme Pressure) gear oil. Capacity and type detailed in manual.
Known Issues
Rust:
Prone to rust in sills, wheel arches, floor pans, and boot floor. Manual covers bodywork repair.
Hydrolastic Suspension:
If fitted, requires specific fluid and periodic pressurization. Manual will cover maintenance.
Carburetor Tuning:
SU carburetors require periodic adjustment for smooth running and optimal performance. Manual provides tuning guidance.
๐ Vehicle History
Brand Heritage
Manufacturer:
British Leyland (initially BMC)
Model Evolution
Positioning:
The 1275 GT was a more performance-oriented variant of the classic Mini, intended as a sportier, more modern option than the standard Mini models of its era.
Design Basis:
Based on the Mini Clubman, featuring the larger 1275cc engine and distinctive sporty styling, including a 'stinger' grille.
Production
Manufacturing Locations:
Primarily United Kingdom.
๐ Awards & Recognition
Recognitions
Model Prestige:
The Mini as a whole is an icon of automotive design and has received numerous accolades for its engineering and cultural impact. The 1275 GT was a performance variant celebrated by enthusiasts.