Engine disassembly and reassembly, transmission overhaul, suspension component replacement, brake caliper and rotor replacement, power steering system repair, electrical component diagnosis and replacement, body panel repair
Troubleshooting:
Diagnostic trouble codes (DTCs), engine performance issues, starting problems, electrical faults, drivability concerns, common issues specific to the Renesis engine
Comprehensive internal engine component specifications, seal replacement procedures, detailed assembly sequences for major components
Pictorial Guidance:
Step-by-step explanations with detailed illustrations, exploded diagrams, and photographs
📊 Manual Specifications
File Format
File Type:
PDF
Print Quality
Printability:
Fully printable, high-resolution pages
Binding Type
Binding Type:
N/A (Digital Download)
Paper Type
Paper Type:
N/A (Digital Download)
Software Requirement
Software Requirement:
Adobe Reader
Compatibility
Operating Systems:
Windows, Mac, Linux OS
⚙️ Engine Specifications
Primary Engine
Engine Type:
Naturally Aspirated Rotary (Wankel)
Engine Name:
13B-MSP Renesis
Rotor Displacement:
654cc per rotor (1308cc total equivalent)
Power Output Hp:
212-238 hp (depending on trim and transmission)
Torque Lb-Ft:
159-164 lb-ft
Redline:
9000 RPM
Performance
0-60 Mph:
Approximately 5.7 - 6.5 seconds
Fuel System
Fuel Delivery:
Sequential multi-port fuel injection (S-MPI)
Fuel Type:
Unleaded gasoline (91 octane or higher recommended)
Oil Type:
Specific rotary engine oil (e.g., Mazda Genuine Rotary Oil, or equivalent API SN/ILSAC GF-5 SAE 5W-30)
🔧 Transmission
Standard
Transmission Type Standard:
6-speed manual transmission (Mazda Type-B)
Optional
Transmission Type Optional:
6-speed automatic transmission (with paddle shifters on some models)
Features
Manual Transmission Features:
Short-throw shifter, close-ratio gearing
Fluid Specs
Manual Transmission Fluid:
API GL-4 SAE 75W-90 (e.g., Mazda Genuine Gear Oil)
Automatic Transmission Fluid:
Mazda ATF-J3 or equivalent
📐 Dimensions
Exterior
Length:
174.6 inches (4435 mm)
Width:
69.7 inches (1770 mm)
Height:
53.0 inches (1345 mm)
Wheelbase:
106.4 inches (2700 mm)
Weights
Curb Weight:
3070 - 3184 lbs (1393 - 1444 kg)
Gross Vehicle Weight Rating:
Approximately 4189 lbs (1900 kg)
🛡️ Safety Features
Ratings
NHTSA Front Impact:
5-Star (Driver and Passenger)
IIHS Side Impact:
Good
Active Features
Active Safety Features:
Anti-lock Braking System (ABS), Electronic Brake-force Distribution (EBD), Traction Control System (TCS), Dynamic Stability Control (DSC)
Passive Features
Passive Safety Features:
Front airbags, side-impact airbags, side curtain airbags, front seatbelt pretensioners, active front head restraints
💡 Technology Features
Infotainment
Audio System:
Bose premium audio system available on higher trims, CD player, AM/FM stereo
Navigation:
Optional GPS navigation system available
Driver Assistance
Cruise Control:
Standard cruise control
Connectivity
Bluetooth:
Available on later models or as an aftermarket add-on.
🔧 Maintenance
Service Intervals
Oil Change Interval:
Every 5,000 miles or 6 months (whichever comes first) for normal driving; consult manual for severe conditions.
Spark Plug Replacement:
Refer to manual for specific rotary plug replacement intervals (often around 30,000-60,000 miles, dependent on type and usage).
Coolant Flush:
Every 45,000 miles or 3 years.
Fluid Specifications
Coolant Type:
Mazda Genuine Long Life Coolant (FL22) or equivalent HOAT (Hybrid Organic Acid Technology) coolant, pre-diluted.
Brake Fluid Type:
DOT 4
Known Issues
Rotary Engine Oil Consumption:
Normal for Renesis to consume oil as part of its lubrication system; proper monitoring and top-up are critical. Excessive consumption can indicate apex seal wear.
Carbon Buildup:
Potential for carbon buildup in the combustion chambers and exhaust ports, requiring periodic cleaning or high-revving driving to mitigate.
Ignition Coils:
Early models were prone to ignition coil failure; later revisions improved reliability.
Starter Motor Heat Soak:
Some owners report difficulty starting when the engine is hot due to starter motor heat soak.
📚 Vehicle History
Brand Heritage
Rotary Legacy:
Continuation of Mazda's long history with rotary engines, dating back to the Cosmo and RX-7 series.
Model Evolution
Concept To Production:
Evolved from the Mazda RX-8 Hydrogen RE concept, showcasing advanced rotary technology and unique styling.
Production
Production Period:
2003-2012 (Global)
Production Locations
Manufacturing Plant:
Mazda's Hiroshima plant, Japan
🏆 Awards & Recognition
Recognitions
Car And Driver 10 Best:
Named to Car and Driver's 10Best list for 2004 and 2005.
World Car Of The Year:
Selected as a finalist for the World Car of the Year award.