1997-2000 CHRYSLER New Yorker Workshop Service Repair MANU
정가
$133.00
할인가
$133.00
정가
단가
/ 단위
할인
품절
🏷️ Basic Information Identification Make: Chrysler Model: New Yorker Generation: Ninth Generation Codes Chassis Code: LH Platform: Chrysler LH-P Platform 👋 Introduction Market Position Target Audience: Chrysler New Yorker owners seeking in-depth repair and maintenance information, professional auto technicians, independent repair shops Competitive Analysis Value Proposition: Provides dealership-level technical information typically unavailable to the public, enabling DIY repairs and informed maintenance decisions. Key Features Content Richness: Comprehensive coverage of all vehicle systems, detailed illustrations, step-by-step procedures. Accessibility: Digital PDF format for easy access and searchability without additional software. Support: Full product support and commitment to customer satisfaction offered by the seller. 📋 Manual Details Coverage Areas Covered Years: 1997, 1998, 1999, 2000 Page Count Estimated Pages: Hundreds (specific count not provided, typical for workshop manuals) Manual Type Type: Workshop Service Repair Manual Language Language: English Format Format: PDF 📖 Manual Coverage Systems Covered Engine Mechanical: Engine repair, overhaul, component replacement (pistons, rings, bearings, valves, camshafts, crankshaft) Engine Management: Fuel system, ignition system, emissions control, engine diagnostics, powertrain control module (PCM) operation Transmission Automatic: Automatic transmission service, repair, overhaul, fluid service, electronic controls Drivetrain: Front-wheel drive system, axles, CV joints, differential Suspension: Front and rear suspension systems, components (struts, shocks, control arms, ball joints, bushings), alignment procedures Brakes: Brake system service, inspection, repair, anti-lock braking system (ABS), brake fluid, pads, rotors, calipers Steering: Power steering system, steering column, steering gear, tie rods Electrical System: Battery, charging system (alternator), starting system (starter), lighting, power accessories HVAC: Heating, Ventilation, and Air Conditioning (HVAC) system diagnosis and repair, refrigerant service, climate control Body And Chassis: Body panel repair, interior trim, exterior trim, chassis components Restraints: Airbag system diagnosis, service, and replacement procedures Procedures Included Maintenance: Oil changes, filter replacements, fluid checks and changes, tune-ups, belt and hose inspection/replacement Troubleshooting: Diagnostic flowcharts, symptom-based troubleshooting guides, fault code interpretation Repair: Step-by-step instructions for component removal, installation, and adjustment for all major vehicle systems Diagnostics: OBD-II (On-Board Diagnostics) code retrieval and interpretation, component testing procedures Wiring Schematics: Comprehensive electrical wiring diagrams for all vehicle systems Specifications: Torque specifications, clearances, fluid capacities, electrical resistance values Rebuilding: Detailed procedures for engine and transmission rebuilding Technical Depth Depth: Covers everything from basic maintenance to major repairs and overhauls, suitable for professional technicians and advanced DIYers Illustrations: Detailed illustrations and diagrams for clarity Searchability: Searchable content via keywords within the PDF 📊 Manual Specifications File Format Type: Portable Document Format (PDF) Compatibility: No software installation required, viewable on most computers and devices Print Quality Quality: Assumed to be high quality for clear reproduction of text and diagrams (typical for professional manuals) Binding Type Type: N/A (Digital PDF format) Paper Type Type: N/A (Digital PDF format) ⚙️ Engine Specifications Primary Engine Engine Code: EER (3.8L V6) Engine Type: 3.8L (3778cc) Overhead Valve (OHV) V6 Bore X Stroke: 3.92 in x 3.38 in (99.5 mm x 85.8 mm) Compression Ratio: 8.5:1 Performance Horsepower Est: 180-185 hp @ 4500-4700 rpm Torque Est: 240-245 lb-ft @ 3200-3300 rpm Fuel System Fuel Delivery: Sequential Multi-Port Fuel Injection (MPI) Fuel Type: Unleaded Regular Gasoline (87 octane recommended) Other Ignition System: Distributorless Ignition System (DIS) with coil-on-plug or coil pack Cooling System: Pressurized liquid cooling system 🔧 Transmission Standard Transmission Type: 4-speed Automatic Transaxle Transmission Model: 42LE Features Electronic Control: Electronically controlled for optimal shift points and performance Fluid Specifications Fluid Type: ATF+4 (Automatic Transmission Fluid) or equivalent specification Fluid Capacities Fluid Capacity Est: Approximately 8.5 quarts (8.0 liters) for a fluid and filter change 📐 Dimensions Exterior Wheelbase In: 113.0 Length In: 201.5 Width In: 74.1 Height In: 56.9 Weights Curb Weight Lbs: Approximately 3,600 - 3,800 lbs (varies by trim and options) 🛡️ Safety Features Ratings NHTSA Frontal Impact Driver: Not available/applicable for all model years tested comprehensively by modern standards, but designed to meet FMVSS standards of the era. NHTSA Frontal Impact Passenger: Not available/applicable for all model years tested comprehensively by modern standards, but designed to meet FMVSS standards of the era. Active Features ABS: Standard Anti-lock Braking System (ABS) Traction Control: Available Traction Control System (TCS) on some models/trims Passive Features Airbags: Standard dual front airbags Seatbelts: Front and rear seat belts, driver's side pretensioner 💡 Technology Features Infotainment Audio System: Factory AM/FM stereo with cassette player and optional CD player. Speaker configurations varied by trim. Climate Control: Manual climate control or optional automatic climate control system with digital readouts. Driver Assistance Cruise Control: Standard cruise control system. Connectivity OBD Standard: OBD-II compliant for emissions and diagnostics. 🔧 Maintenance Service Intervals Oil Change: Every 3,000-7,500 miles (depending on oil type used, synthetic blends and synthetics allow longer intervals). Check manual for specific recommendations based on driving conditions. Transmission Fluid Change: Every 30,000 - 60,000 miles. Recommended to check fluid level and condition regularly. Clutch pack wear is a common concern on the 42LE....
Detailed procedures for engine and transmission rebuilding
Technical Depth
Depth:
Covers everything from basic maintenance to major repairs and overhauls, suitable for professional technicians and advanced DIYers
Illustrations:
Detailed illustrations and diagrams for clarity
Searchability:
Searchable content via keywords within the PDF
📊 Manual Specifications
File Format
Type:
Portable Document Format (PDF)
Compatibility:
No software installation required, viewable on most computers and devices
Print Quality
Quality:
Assumed to be high quality for clear reproduction of text and diagrams (typical for professional manuals)
Binding Type
Type:
N/A (Digital PDF format)
Paper Type
Type:
N/A (Digital PDF format)
⚙️ Engine Specifications
Primary Engine
Engine Code:
EER (3.8L V6)
Engine Type:
3.8L (3778cc) Overhead Valve (OHV) V6
Bore X Stroke:
3.92 in x 3.38 in (99.5 mm x 85.8 mm)
Compression Ratio:
8.5:1
Performance
Horsepower Est:
180-185 hp @ 4500-4700 rpm
Torque Est:
240-245 lb-ft @ 3200-3300 rpm
Fuel System
Fuel Delivery:
Sequential Multi-Port Fuel Injection (MPI)
Fuel Type:
Unleaded Regular Gasoline (87 octane recommended)
Other
Ignition System:
Distributorless Ignition System (DIS) with coil-on-plug or coil pack
Cooling System:
Pressurized liquid cooling system
🔧 Transmission
Standard
Transmission Type:
4-speed Automatic Transaxle
Transmission Model:
42LE
Features
Electronic Control:
Electronically controlled for optimal shift points and performance
Fluid Specifications
Fluid Type:
ATF+4 (Automatic Transmission Fluid) or equivalent specification
Fluid Capacities
Fluid Capacity Est:
Approximately 8.5 quarts (8.0 liters) for a fluid and filter change
📐 Dimensions
Exterior
Wheelbase In:
113.0
Length In:
201.5
Width In:
74.1
Height In:
56.9
Weights
Curb Weight Lbs:
Approximately 3,600 - 3,800 lbs (varies by trim and options)
🛡️ Safety Features
Ratings
NHTSA Frontal Impact Driver:
Not available/applicable for all model years tested comprehensively by modern standards, but designed to meet FMVSS standards of the era.
NHTSA Frontal Impact Passenger:
Not available/applicable for all model years tested comprehensively by modern standards, but designed to meet FMVSS standards of the era.
Active Features
ABS:
Standard Anti-lock Braking System (ABS)
Traction Control:
Available Traction Control System (TCS) on some models/trims
Passive Features
Airbags:
Standard dual front airbags
Seatbelts:
Front and rear seat belts, driver's side pretensioner
💡 Technology Features
Infotainment
Audio System:
Factory AM/FM stereo with cassette player and optional CD player. Speaker configurations varied by trim.
Climate Control:
Manual climate control or optional automatic climate control system with digital readouts.
Driver Assistance
Cruise Control:
Standard cruise control system.
Connectivity
OBD Standard:
OBD-II compliant for emissions and diagnostics.
🔧 Maintenance
Service Intervals
Oil Change:
Every 3,000-7,500 miles (depending on oil type used, synthetic blends and synthetics allow longer intervals). Check manual for specific recommendations based on driving conditions.
Transmission Fluid Change:
Every 30,000 - 60,000 miles. Recommended to check fluid level and condition regularly. Clutch pack wear is a common concern on the 42LE.
Spark Plugs:
100,000 miles for platinum or iridium plugs (if equipped), refer to manual for original specification and replacement intervals.
Coolant Flush:
Every 30,000 - 100,000 miles, depending on coolant type and manufacturer recommendations. Original coolant was likely a Mopar HOAT (Hybrid Organic Acid Technology).
Fluid Specifications
Engine Oil Type:
SAE 5W-30 (check owner's manual for specific viscosity and API service rating)
Engine Oil Capacity:
Approximately 4.5 quarts (4.3 liters) with filter change.
Power Steering Fluid:
Mopar Power Steering Fluid or equivalent (e.g., Dexron III compatible)
Brake Fluid:
DOT 3 or DOT 4 brake fluid (refer to manual for specific type required by ABS system)
Known Issues
Transmission Failures:
The 42LE transmission can be prone to internal wear and solenoid issues, particularly with higher mileage and neglected fluid changes. Clutch pack degradation is common.
Heater Core Leaks:
Heater core located within the dashboard can develop leaks, requiring extensive labor to replace.
Idler Pulley Noise:
A squealing or grinding noise from the accessory drive belt system can indicate a failing idler pulley.
Strut Mounts:
Worn strut mounts can cause clunking noises and affect handling.
Window Regulators:
Power window regulators can fail over time, leading to windows not operating.
📚 Vehicle History
Brand Heritage
Brand Legacy:
Chrysler has a long history of producing large, comfortable, and often luxurious sedans and coupes, with the New Yorker nameplate representing a significant part of that heritage, often positioned as a premium offering.
Model Evolution
Ninth Gen Introduction:
The ninth generation New Yorker was introduced for the 1994 model year, built on the LH platform, sharing its underpinnings with other Chrysler and Dodge sedans. This generation marked a significant styling and engineering update for the New Yorker.
Production
Production Period:
1997-2000 (This specific manual covers this range within the ninth generation)
The 3.8L EGH/EER V6 engine was recognized by Ward's AutoWorld in its annual '10 Best Engines' list multiple times during its production run for its refinement and torque.