Daihatsu Terios 2 J210 2009 Workshop Service Repair Manual
정가
$133.00
할인가
$133.00
정가
단가
/ 단위
할인
품절
🏷️ Basic Information Identification Make: Daihatsu Model: Terios Generation: 2 (J200/J210) Year: 2009 Chassis Code: J210 Codes Platform Code: J200 Series 👋 Introduction Market Position Vehicle Segment: Compact SUV / Crossover Target Audience: Consumers seeking a versatile, compact, and often 4WD capable vehicle for urban and light off-road use. Competitive Analysis Key Competitors Circa 2009: Suzuki Vitara, Honda CR-V (older generation), Toyota RAV4 (older generation), Nissan Qashqai (early models), Mitsubishi Outlander. Key Features Body Style: 5-door SUV/Crossover Drivetrain Options: Available in 2WD and full-time 4WD with centre differential. Design Philosophy: Compact dimensions, practical interior, raised driving position, robust styling suitable for light off-road capability. 📋 Manual Details Coverage Areas Market Coverage: Global (specific to J210 variant, likely including regions where this chassis was prevalent) Trim Level Coverage: All models/engines/trim levels for the J210 chassis Page Count Estimated Page Count: 1500+ Manual Type Type: Workshop Service Repair Manual Language Language: English Format Format: PDF Download 📖 Manual Coverage Systems Covered Engine Mechanical: Engine assembly, cylinder head, block, crankshaft, pistons, connecting rods, camshafts, valve train, lubrication system, cooling system, timing system. Engine Performance: Fuel injection system, ignition system, emission control system, turbocharging (if applicable), engine management. Transmission Manual: Manual transmission assembly, clutch, shift mechanism, gear ratios, lubrication. Transmission Automatic: Automatic transmission assembly (if applicable to J210), torque converter, valve body, planetary gear sets, shift control, transmission control module (TCM), fluid specifications. Drivetrain: Four-wheel drive (4WD) system, transfer case, drive shafts, differentials (front and rear), CV joints, wheel hubs. Suspension: Front suspension (e.g., MacPherson strut), rear suspension (e.g., multi-link or solid axle depending on configuration), springs, shock absorbers, control arms, stabilizer bars, bushings. Steering: Power steering system (hydraulic or electric), steering rack, tie rods, steering column, wheel alignment specifications. Brakes: Front and rear brake systems (disc/drum configurations), brake calipers, rotors, pads, master cylinder, brake booster, ABS system, parking brake. Electrical System: Battery, charging system (alternator), starting system (starter motor), lighting systems (headlights, taillights, interior), fuses, relays, wiring diagrams, grounds. Body And Chassis: Body panels, doors, hood, tailgate, bumpers, chassis structure, anti-corrosion protection, glass and seals. HVAC: Heating, Ventilation, and Air Conditioning system, refrigerant system, compressor, condenser, evaporator, blower motor, climate control unit. Interior Trim: Dashboard, seats, door panels, headliner, carpeting, seat belts, airbags. Diagnostics: On-Board Diagnostics (OBD-II) system, diagnostic trouble codes (DTCs), sensor data interpretation, troubleshooting guides. Procedures Included Routine Maintenance: Oil changes, filter replacements, fluid checks and top-offs, tire rotations, spark plug replacement, brake pad inspections. Repair Procedures: Component removal and installation, engine overhaul, transmission rebuilds, suspension component replacement, brake caliper/rotor replacement, electrical component testing and replacement. Troubleshooting: Systematic diagnostic approaches for common and uncommon problems, symptom-based troubleshooting charts, electrical circuit tracing. Special Tools: Identification and usage of specialized tools required for specific repairs or adjustments. Torque Specifications: Detailed torque values for all critical fasteners across all systems. Wiring Diagrams: Comprehensive electrical wiring schematics for all vehicle systems. Schematics And Diagrams: Detailed diagrams for mechanical, hydraulic, and pneumatic systems. Technical Depth Depth: Comprehensive, covering everything from basic fluid checks to complete engine and transmission rebuilds. Diagnostic Level: Advanced diagnostics, including sensor data analysis and electronic control unit (ECU) function interpretation. Component Level Detail: Detailed component disassembly, inspection, repair, and reassembly instructions. 📊 Manual Specifications File Format Type: PDF Searchable Text: Yes (assumed for professional PDF manuals) Printable: Yes Print Quality Resolution: High-resolution (suitable for clear viewing of diagrams and text) Binding Type Type: N/A (Digital PDF format) Paper Type Type: N/A (Digital PDF format) ⚙️ Engine Specifications Primary Engine Engine Code Typical For J210: 3SZ-VE Engine Type: Inline-4, DOHC, 16-valve, VVT-i (Variable Valve Timing with intelligence) Displacement: 1495 cc (1.5 Liters) Bore X Stroke: 72.0 mm x 91.8 mm (typical for 3SZ-VE) Compression Ratio: 10.0:1 (typical for 3SZ-VE) Performance Horsepower: Approx. 109 PS (80 kW; 108 hp) at 6000 rpm (varies by market tune) Torque: Approx. 141 Nm (104 lb-ft) at 4400 rpm (varies by market tune) Fuel System Fuel Delivery: Electronic Fuel Injection (EFI) Fuel Type: Unleaded gasoline Emission Standard: Euro IV / EPA (market dependent) 🔧 Transmission Standard Type: 5-speed Manual Transmission Optional Type: 4-speed Automatic Transmission Features 4Wd System: Full-time 4WD with centre differential, some models may have lockable centre differential. Transmission Fluid Manual: GL-4 SAE 75W-90 (for manual gearbox, consult manual for specific part numbers) Transmission Fluid Automatic: Dexron III or equivalent (for automatic gearbox, consult manual for specific part numbers and capacity) 📐 Dimensions Exterior Length: Approx. 4,195 mm Width: Approx. 1,695 mm Height: Approx. 1,700 mm (unladen, may vary with roof rails) Wheelbase: Approx. 2,580 mm Ground Clearance: Approx. 190 mm Weights Curb Weight: Approx. 1,300 - 1,400 kg (depending on configuration) Gross Vehicle Weight Rating: Varies by market, typically around 1,800 kg. 🛡️ Safety Features Ratings NHTSA Rating: Not readily available for all markets, typically received average ratings for its class in its era. Ancap...
Four-wheel drive (4WD) system, transfer case, drive shafts, differentials (front and rear), CV joints, wheel hubs.
Suspension:
Front suspension (e.g., MacPherson strut), rear suspension (e.g., multi-link or solid axle depending on configuration), springs, shock absorbers, control arms, stabilizer bars, bushings.
Steering:
Power steering system (hydraulic or electric), steering rack, tie rods, steering column, wheel alignment specifications.
Brakes:
Front and rear brake systems (disc/drum configurations), brake calipers, rotors, pads, master cylinder, brake booster, ABS system, parking brake.
Electrical System:
Battery, charging system (alternator), starting system (starter motor), lighting systems (headlights, taillights, interior), fuses, relays, wiring diagrams, grounds.
Body And Chassis:
Body panels, doors, hood, tailgate, bumpers, chassis structure, anti-corrosion protection, glass and seals.
HVAC:
Heating, Ventilation, and Air Conditioning system, refrigerant system, compressor, condenser, evaporator, blower motor, climate control unit.
Interior Trim:
Dashboard, seats, door panels, headliner, carpeting, seat belts, airbags.
Oil changes, filter replacements, fluid checks and top-offs, tire rotations, spark plug replacement, brake pad inspections.
Repair Procedures:
Component removal and installation, engine overhaul, transmission rebuilds, suspension component replacement, brake caliper/rotor replacement, electrical component testing and replacement.
Troubleshooting:
Systematic diagnostic approaches for common and uncommon problems, symptom-based troubleshooting charts, electrical circuit tracing.
Special Tools:
Identification and usage of specialized tools required for specific repairs or adjustments.
Torque Specifications:
Detailed torque values for all critical fasteners across all systems.
Wiring Diagrams:
Comprehensive electrical wiring schematics for all vehicle systems.
Schematics And Diagrams:
Detailed diagrams for mechanical, hydraulic, and pneumatic systems.
Technical Depth
Depth:
Comprehensive, covering everything from basic fluid checks to complete engine and transmission rebuilds.
Diagnostic Level:
Advanced diagnostics, including sensor data analysis and electronic control unit (ECU) function interpretation.
Component Level Detail:
Detailed component disassembly, inspection, repair, and reassembly instructions.
📊 Manual Specifications
File Format
Type:
PDF
Searchable Text:
Yes (assumed for professional PDF manuals)
Printable:
Yes
Print Quality
Resolution:
High-resolution (suitable for clear viewing of diagrams and text)
Binding Type
Type:
N/A (Digital PDF format)
Paper Type
Type:
N/A (Digital PDF format)
⚙️ Engine Specifications
Primary Engine
Engine Code Typical For J210:
3SZ-VE
Engine Type:
Inline-4, DOHC, 16-valve, VVT-i (Variable Valve Timing with intelligence)
Displacement:
1495 cc (1.5 Liters)
Bore X Stroke:
72.0 mm x 91.8 mm (typical for 3SZ-VE)
Compression Ratio:
10.0:1 (typical for 3SZ-VE)
Performance
Horsepower:
Approx. 109 PS (80 kW; 108 hp) at 6000 rpm (varies by market tune)
Torque:
Approx. 141 Nm (104 lb-ft) at 4400 rpm (varies by market tune)
Fuel System
Fuel Delivery:
Electronic Fuel Injection (EFI)
Fuel Type:
Unleaded gasoline
Emission Standard:
Euro IV / EPA (market dependent)
🔧 Transmission
Standard
Type:
5-speed Manual Transmission
Optional
Type:
4-speed Automatic Transmission
Features
4Wd System:
Full-time 4WD with centre differential, some models may have lockable centre differential.
Transmission Fluid Manual:
GL-4 SAE 75W-90 (for manual gearbox, consult manual for specific part numbers)
Transmission Fluid Automatic:
Dexron III or equivalent (for automatic gearbox, consult manual for specific part numbers and capacity)
📐 Dimensions
Exterior
Length:
Approx. 4,195 mm
Width:
Approx. 1,695 mm
Height:
Approx. 1,700 mm (unladen, may vary with roof rails)
Wheelbase:
Approx. 2,580 mm
Ground Clearance:
Approx. 190 mm
Weights
Curb Weight:
Approx. 1,300 - 1,400 kg (depending on configuration)
Gross Vehicle Weight Rating:
Varies by market, typically around 1,800 kg.
🛡️ Safety Features
Ratings
NHTSA Rating:
Not readily available for all markets, typically received average ratings for its class in its era.
Ancap Rating:
Likely 3-4 stars (based on similar models and period testing).
Active Features
ABS:
Anti-lock Braking System (standard)
Ebs:
Electronic Brakeforce Distribution (EBD) (standard)
Bas:
Brake Assist (standard)
Traction Control:
Traction Control System (TCS) (optional or standard on higher trims)
Stability Control:
Electronic Stability Control (ESC) (often optional or market-specific)
Passive Features
Airbags:
Front airbags for driver and passenger, side airbags and curtain airbags (optional or market-specific).
Seatbelts:
3-point seatbelts with pretensioners and load limiters for front seats, 3-point seatbelts for rear seats.
Child Anchors:
ISOFIX child seat mounting points.
💡 Technology Features
Infotainment
Audio System:
Standard AM/FM radio with CD player, optional MP3 compatibility and auxiliary input. Higher trims may have touchscreens and navigation depending on market.
Speaker Count:
Typically 4-6 speakers.
Driver Assistance
Parking Sensors:
Optional rear parking sensors on some models.
Cruise Control:
Available on higher trim levels.
Connectivity
Bluetooth:
Rare on base models, more common on higher trims with upgraded audio systems.
Usb Port:
Rarely standard on 2009 models, may be present in aftermarket upgrades or higher trims.
🔧 Maintenance
Service Intervals
Oil Change Interval:
Typically 10,000 km or 6 months, whichever comes first. Consult manual for exact specifications.
Air Filter Replacement:
Every 20,000 - 40,000 km or as needed based on driving conditions.
Spark Plug Replacement:
Iridium type: typically 100,000 km. Consult manual for exact type and interval.
Coolant Replacement:
Initial: ~5 years or 100,000 km. Subsequent: Every 2 years or 40,000 km. Consult manual for specific coolant type and interval.
Brake Fluid Replacement:
Every 2 years or 40,000 km. Consult manual for DOT specification.
Fluid Specifications
Engine Oil Type Viscosity:
API SN/SP, ILSAC GF-5/GF-6A, SAE 5W-30 or 0W-20 (market dependent, consult manual)
Engine Oil Capacity:
Approx. 3.9 Liters with filter change for 3SZ-VE engine.
Coolant Type:
Toyota Super Long Life Coolant (SLLC) or equivalent ethylene glycol-based antifreeze.
Power Steering Fluid:
ATF Dexron II/III or equivalent, or specific power steering fluid. Consult manual.
Generally reliable, but potential for oil consumption with higher mileage on the 3SZ-VE engine. Regular oil level checks are important.
4Wd System Maintenance:
Regularly check and change transfer case and differential fluids to maintain 4WD system longevity.
📚 Vehicle History
Brand Heritage
Daihatsu History:
Daihatsu, a subsidiary of Toyota, has a long history of producing small, practical, and reliable vehicles, specializing in kei cars and compact SUVs.
Model Evolution
Terios Generations:
The Terios was first introduced in 1997. The second generation (J200/J210) was launched in 2006 and represents a significant redesign with a longer wheelbase and more modern styling compared to its predecessor.
J210 Specifics:
The J210 designation typically refers to models equipped with the 1.5L engine and 4WD system.
Production
Manufacturing Locations:
Primarily manufactured in Japan, with some production or assembly potentially occurring in other Daihatsu global facilities or licensed by Toyota (e.g., under the Toyota brand in some markets).
Production Years For Generation:
2006 - 2016 (facelifted in 2013)
🏆 Awards & Recognition
Recognitions
Best Value Awards:
The Terios often received accolades for its affordability and value proposition in its segment.
Reliability Rankings:
Daihatsu vehicles generally rank well in reliability surveys, particularly in markets where the brand is dominant.
Certifications
Emissions Compliance:
Certified to meet various international emissions standards (e.g., Euro IV).