KTM 450 EXC 2000 2001 2002 2003 Repair Service Manual
정가
$133.00
할인가
$133.00
정가
단가
/ 단위
할인
품절
🏷️ Basic Information Identification Make: KTM Model: 450 EXC Model Year: 2000, 2001, 2002, 2003 Codes Engine Code: LC4 (single-cylinder, 4-stroke) 👋 Introduction Market Position Market Segment: Enduro/Off-Road Competition and Recreation Competitive Analysis Competitors: Yamaha WR450F, Honda CRF450X, Suzuki RM-Z450, Kawasaki KX450F (though model years may vary in direct competition). Key Features Vehicle Type: High-performance, liquid-cooled, single-cylinder, four-stroke enduro motorcycle. Intended Use: Off-road riding, trail riding, competitive enduro racing, desert racing. 📋 Manual Details Coverage Areas Systems Covered: Engine mechanical, fuel system, ignition system, cooling system, lubrication system, transmission, clutch, chassis, suspension, brakes, electrical system, bodywork, troubleshooting, maintenance schedules, specifications. Page Count Page Count: Estimated 200-400 pages (typical for comprehensive service manuals). Manual Type Manual Type: Workshop Service Manual / Repair Manual Language Language: English (assumed primary language for technical manuals of this era and origin). Format Format: PDF Download 📖 Manual Coverage Systems Covered Engine Mechanical: Top-end rebuild (cylinder, piston, valves, camshaft), bottom-end rebuild (crankshaft, connecting rod, bearings), cylinder head disassembly and assembly, valve timing, compression testing. Fuel System: Carburetor disassembly, cleaning, adjustment (jetting), float bowl maintenance, fuel pump operation (if applicable), fuel line inspection. Ignition System: Spark plug diagnosis and replacement, ignition coil testing, CDI unit testing (if applicable), stator and rotor inspection, timing adjustments. Cooling System: Radiator maintenance, coolant flush and refill, water pump inspection and seal replacement, thermostat testing, fan operation (if equipped). Lubrication System: Oil change procedure, oil filter replacement, oil pump inspection, oil pressure testing, oil sump cleaning. Transmission Clutch: Clutch plate replacement, clutch cable adjustment, transmission gear inspection, shift mechanism troubleshooting, gearbox oil change and capacity. Chassis Suspension: Front fork service (oil change, seal replacement, spring inspection), rear shock absorber service, linkage bearing maintenance, steering head bearing adjustment. Brakes: Brake pad replacement, brake fluid flush and bleed, caliper inspection and service, master cylinder overhaul, rotor inspection. Electrical System: Wiring diagram interpretation, battery testing and maintenance, lighting system checks, switchgear function, starter motor and charging system diagnosis. Bodywork: Panel removal and installation, seat maintenance, fender replacement, graphic application (though less detailed in service manuals). Procedures Included Maintenance: Routine inspections, cleaning procedures, lubrication points, filter replacement, fluid changes. Troubleshooting: Diagnostic flowcharts for common problems (e.g., engine no-start, poor performance, electrical faults). Repair: Step-by-step disassembly, reassembly, and adjustment procedures for all major vehicle components. Installation: Guidance on installing specific aftermarket parts or replacement OEM components (often inferred from removal/installation procedures). Technical Depth Depth: Comprehensive, covering everything from basic fluid changes to full engine and transmission rebuilds. Designed for professional technicians but accessible to skilled home mechanics. 📊 Manual Specifications File Format File Format: PDF (Portable Document Format) Print Quality Print Quality: High-resolution scans suitable for printing, with clear diagrams and readable text. Binding Type Binding Type: N/A (Digital Download) Paper Type Paper Type: N/A (Digital Download) ⚙️ Engine Specifications Primary Engine Engine Type: Four-stroke, single-cylinder, SOHC (Single Overhead Camshaft), LC4 engine architecture. Displacement: Approximately 449cc (exact can vary slightly by year/specific model variant, but the 450 designation is standard). Bore X Stroke: Approx. 95mm x 63.4mm (typical for this generation LC4 450). Cooling System: Liquid-cooled (radiator). Performance Horsepower: Estimated 45-50 HP (at crankshaft, depending on specific tuning and model year). Torque: Estimated 40-45 Nm (at crankshaft). Fuel System Fuel Delivery: Carburetor (typically a Keihin FCR series, often 39mm or 41mm). Ignition Type: Digital CDI with variable ignition timing. Lubrication System Oil Capacity: Approx. 1.0-1.2 liters (engine oil, check manual for exact amount during oil change). 🔧 Transmission Standard Transmission Type: 6-speed sequential constant mesh gearbox. Optional Clutch Type: Wet multi-plate clutch, hydraulically actuated. Features Gear Ratios: Specific gear ratios are detailed within the manual, crucial for performance tuning. 📐 Dimensions Exterior Wheelbase: Approx. 1470-1480 mm (varies slightly by year). Seat Height: Approx. 960-970 mm (unladen). Weights Dry Weight: Approx. 115-120 kg (without fuel and other fluids). Fuel Tank Capacity: Approx. 9-12 liters (often with a reserve). 🛡️ Safety Features Ratings Safety Standards: Designed for off-road use; does not meet road-legal safety standards without modifications and specific equipment. Active Features Braking System Front: Hydraulic disc brake, dual piston caliper (e.g., Brembo). Braking System Rear: Hydraulic disc brake, single piston caliper (e.g., Brembo). Passive Features Frame Construction: Chromium-molybdenum steel trellis frame. 💡 Technology Features Infotainment Infotainment System: N/A (Basic motocycle design, no infotainment system). Driver Assistance Driver Assistance Features: N/A (Designed for rider control, no electronic rider aids like ABS or traction control). Connectivity Connectivity Features: N/A. 🔧 Maintenance Service Intervals Oil Change Interval: Every 15-20 hours of riding or annually. Refer to manual for precise intervals based on usage. Air Filter Cleaning: Every 5-10 hours of riding or as needed based on conditions. Spark Plug Replacement: Every 20-30 hours of riding or as indicated by performance issues. Valve Clearance Check: Every 30-40 hours of riding. Crucial for maintaining performance and engine longevity. Fluid Specifications Engine Oil Type:...
Front fork service (oil change, seal replacement, spring inspection), rear shock absorber service, linkage bearing maintenance, steering head bearing adjustment.
Brakes:
Brake pad replacement, brake fluid flush and bleed, caliper inspection and service, master cylinder overhaul, rotor inspection.
Electrical System:
Wiring diagram interpretation, battery testing and maintenance, lighting system checks, switchgear function, starter motor and charging system diagnosis.
Bodywork:
Panel removal and installation, seat maintenance, fender replacement, graphic application (though less detailed in service manuals).
Diagnostic flowcharts for common problems (e.g., engine no-start, poor performance, electrical faults).
Repair:
Step-by-step disassembly, reassembly, and adjustment procedures for all major vehicle components.
Installation:
Guidance on installing specific aftermarket parts or replacement OEM components (often inferred from removal/installation procedures).
Technical Depth
Depth:
Comprehensive, covering everything from basic fluid changes to full engine and transmission rebuilds. Designed for professional technicians but accessible to skilled home mechanics.
📊 Manual Specifications
File Format
File Format:
PDF (Portable Document Format)
Print Quality
Print Quality:
High-resolution scans suitable for printing, with clear diagrams and readable text.
Hydraulic disc brake, single piston caliper (e.g., Brembo).
Passive Features
Frame Construction:
Chromium-molybdenum steel trellis frame.
💡 Technology Features
Infotainment
Infotainment System:
N/A (Basic motocycle design, no infotainment system).
Driver Assistance
Driver Assistance Features:
N/A (Designed for rider control, no electronic rider aids like ABS or traction control).
Connectivity
Connectivity Features:
N/A.
🔧 Maintenance
Service Intervals
Oil Change Interval:
Every 15-20 hours of riding or annually. Refer to manual for precise intervals based on usage.
Air Filter Cleaning:
Every 5-10 hours of riding or as needed based on conditions.
Spark Plug Replacement:
Every 20-30 hours of riding or as indicated by performance issues.
Valve Clearance Check:
Every 30-40 hours of riding. Crucial for maintaining performance and engine longevity.
Fluid Specifications
Engine Oil Type:
High-quality motorcycle-specific 4-stroke engine oil, typically SAE 10W-40 or 15W-50, meeting API SG/SH/SJ or higher. JASO MA standard is important.
Coolant Type:
Ethylene glycol-based antifreeze/coolant with corrosion inhibitors, mixed with distilled water at a 50/50 ratio.
Brake Fluid Type:
DOT 4 or DOT 5.1 brake fluid (check manual for specific recommendation).
Fork Oil Type:
Specific fork oil viscosity (e.g., WP Suspension Fluid 5W or equivalent) and volume per fork leg as per manual.
Known Issues
Common Wear Items:
Clutch wear, valve seat wear, water pump seals, swingarm and linkage bearings, wheel bearings, countershaft seal leaks.
Carburetor Tuning:
Sensitivity to altitude and temperature changes, requiring periodic jetting adjustments for optimal performance.
Electrical Connections:
Corrosion or loose connections in off-road environments can lead to intermittent electrical faults.
📚 Vehicle History
Brand Heritage
Brand Origin:
Austrian manufacturer founded in 1934, known for its off-road racing pedigree.
Model Evolution
Predecessor Model:
KTM LC4 series (e.g., 400 EXC, 520 EXC) were key evolutionary steps.
Generation Significance:
This generation (2000-2003) represented a significant advancement in KTM's four-stroke off-road lineup, solidifying their competitive presence in enduro.
Production
Manufacturing Location:
Austria
🏆 Awards & Recognition
Recognitions
Racing Success:
The LC4 platform, including the 450 EXC, has a strong history in off-road racing, including enduro and Baja events, though specific model year awards are less commonly tracked than overall platform success.