Original Illustrated Factory Operating and Maintenance Instructions for Linde Pallet Truck Type 141.

Original factory manuals for Linde Forklift Trucks, contains high quality images, circuit diagrams and instructions to help you to operate and repair your truck

Covered models:
L16AS

Format: PDF, 52 Pages
Language: English

Contents:

Description
Plates and labels
Technical characteristics
Technical description
Overview L16AS
Controls
Indicators
Time counter unit
Discharge limiter indicator
Startup I Daily checks and operation before startup
Safety rules
Definition of safety terms
Usingingredients
Periodic checks on the pallet truck
Recommendations for starting up
Checks before first startup
Daily checks before use
Checking forward/reverse and raise/lower controls
Checking the safety braking
Checking automatic braking
Checking the driver presence safety device
Checking operation of the emergency stop button .
Checking the safety inverter switch
Checking the horn
Checking the battery charge condition
Opening and closing the battery cover
Connecting the battery connector
Recharging the battery with an external charger ...
Checking the state of terminal cables and battery connector
Checking the electrolyte level and topping up with water
Checking the electrolyte density
Removing/Replacingthe battery .
Replacing the battery using a trolley
Usage
Usage instructions
Startup
Safety switch
Emergency stop button
Determiningthe running direction
Steering 20-
Driving
Forward / reverse running
Reversingthe running direction
Using the pallet truck on a slope
Going upslopes
Going down slopes
Starting on a slope
Electromagnetic braking
Braking by reversing the running direction
Parking brake
L.B.C, automatic braking
Horncontrol
Using the mast
Raising and lowering the mast using the control lever on the chassis
Raising and lowering the master by controlling the tiller
Controllingauxiliary equipment
Handlingloads
Reading the rating plate
Adjusting the spacing between forks
Picking up a load on the ground
Transporting a load
Putting a load down on the ground
Stacking a load
Picking up a load at a height
Before leaving the pallet truck
Slinging the pallet truck
Lifting the pallet truck
Towing
Taking the mast off
Transport and storage of the pallet truck
Maintenance
General comments
Work on the elevator mast
Standard elevator mast
Safety device for standard elevator mast
Duplex elevator mast
Safety device for Duplex elevator mast
Triplex elevator mast
Safety device for Triplex elevator mast
Checks and maintenance work after the first
50 hours of service*
Calendar for maintenance work
Maintenance as required
Cleaning the pallet truck
Cleaning and greasing chains
Cleaning and greasing the mast
Opening the front cover
Checking the attachment and condition of the wheels
Fuses
Checking the electrolyte level and topping up with water
Checking the electrolyte density
Checking the condition of cables, terminals and the battery connector
Cleaning the battery and the battery compartment
Maintenance every 500 hours
Lubrication of the drive unit steering bearing
Checking the various hinges
Checking the leak tightness of the hydraulic circuit
Checking the hydraulic fluid level
Checking the condition and attachment of the mast and chains
Checking the length of mast chains
Checking the condition and attachment of cables and electrical connections
Cleaning the electrical panel
Checking contact wear
Checking the traction motor brushes, and replacement if necessary
Adjusting the electromagnetic brake
Maintenance every 1000 hours
Checking the reduction gear oil level
Removing the motor-pump unit
Checking the pump motor brushes, and
replacement if necessary
Cleaning the hydraulic filter and cap
Checking the mechanical attachment of devices
Maintenance every 2000 hours
Replacingthe hydraulic fluid
Replacing reduction gear oil
Recommended lubricants
Technical characteristics
Hydraulic diagrams
L 16 AS electrical diagrams
Index