Polaris 400 Xplorer 1996-1998 Workshop Service Manual
정가
$133.00
할인가
$133.00
정가
단가
/ 단위
할인
품절
🏷️ Basic Information Identification Make: Polaris Model: Xplorer 400 Model Variant: 400 Codes Product Name: Polaris 400 Xplorer 1996-1998 Workshop Service Manual PDF Download 👋 Introduction Market Position Segment: Sport Utility ATV (All-Terrain Vehicle) Target Use: Recreational riding, trail riding, light utility work. Competitive Analysis Competitors: Other 400cc class ATVs from manufacturers like Yamaha (Warrior/Banshee), Suzuki (QuadSport), Kawasaki (Bayou/Lakota), Can-Am (Outlander 400 predecessors). Key Features Engine Type: 2-stroke, liquid-cooled engine known for its power-to-weight ratio. Drivetrain: Shaft drive, providing reliability and reduced maintenance compared to chain drive. Suspension: Independent front suspension and a single rear shock absorber for improved ride comfort and handling. Braking: Hydraulic disc brakes on all wheels for consistent stopping power. 📋 Manual Details Coverage Areas Applicable Years: 1996, 1997, 1998 Target Audience: Mechanical Technicians, Service Professionals, Enthusiasts Page Count Estimated Pages: Comprehensive (Exact count not specified, but implied extensive) Manual Type Manual Category: Workshop Service Manual Language Language: English Format Delivery Format: PDF Download 📖 Manual Coverage Systems Covered Engine Mechanical: Full overhaul, repair, diagnostics, tuning of the 400cc 2-stroke engine. Fuel System: Carburetor service, fuel pump, fuel lines, fuel tank maintenance and repair. Ignition System: Ignition coil, spark plug, CDI unit, stator, wiring diagnostics and replacement. Cooling System: Radiator, coolant, fan, thermostat, hoses, and associated components. Exhaust System: Muffler, pipes, seals, and troubleshooting for emissions. Transmission: Gearbox inspection, maintenance, rebuild procedures, lubrication specifications. Drivetrain: Shaft drive system, universal joints, final drive assembly, lubrication. Suspension Front: A-arms, shocks, springs, bushings, steering linkage, alignment procedures. Suspension Rear: Monoshock absorber, swingarm, bearings, linkage maintenance. Brakes Front: Hydraulic disc brake system, calipers, master cylinder, brake lines, pads, rotor service. Brakes Rear: Hydraulic disc brake system, caliper, master cylinder, brake lines, pads, rotor service. Steering: Handlebar, steering shaft, tie rods, tie rod ends, steering column lubrication and adjustment. Wheels Tires: Wheel bearing service, tire pressure recommendations, rim maintenance. Electrical System: Battery, charging system, lighting, starter motor, wiring diagrams, fuse/relay troubleshooting. Body Frame: Frame inspection, plastic body panel removal/installation, seat, racks, fenders. Accessories: Winch installation, lighting kits, storage options (if applicable to the era). Procedures Included Preventive Maintenance: Scheduled maintenance tasks, fluid changes, filter replacements, lubrication points. Diagnostic Troubleshooting: Step-by-step guides for identifying and resolving common and uncommon issues. Repair Overhaul: Detailed instructions for component disassembly, cleaning, inspection, and reassembly. Tune Up: Engine tuning, carburetor adjustment, ignition timing verification. Wiring Diagrams: Complete electrical system schematics for accurate diagnosis. Torque Specifications: Precise torque values for all critical fasteners. Special Tools: Identification and usage instructions for any specialized tools required. Technical Depth Depth Level: Comprehensive: Covers basic to advanced repair and rebuild procedures. Diagnostics Detail: In-depth troubleshooting charts and diagnostic flowcharts. Rebuild Procedures: Complete engine, transmission, and suspension rebuild instructions. 📊 Manual Specifications File Format File Type: PDF Searchable Text: Likely (standard for professional PDFs) Print Quality Print Readability: Designed for clarity and printability. Binding Type Binding: N/A (Digital PDF) Paper Type Paper Quality: N/A (Digital PDF) ⚙️ Engine Specifications Primary Engine Engine Size: 399 cc Engine Type: 2-Stroke, Liquid-Cooled, Single-Cylinder Bore X Stroke: Not explicitly stated but typical for this engine class. Performance Horsepower Estimate: Approximately 25-30 HP (Varies by specific tuning and conditions) Torque Estimate: Not explicitly stated but indicative of strong mid-range power for its class. Fuel System Carburetor Type: Single Mikuni VM34SS (or similar sized Mikuni) Fuel Type: Unleaded Gasoline (87 octane or higher recommended) Oil Mixture: Pre-mix or Oil Injection (Specify if manual details oil injection system) Ignition System Ignition Type: CDI (Capacitor Discharge Ignition) Cooling System Cooling Method: Liquid-Cooled with Fan Assist 🔧 Transmission Standard Transmission Type: CVT (Continuously Variable Transmission) with High/Low Range Drive System: Shaft Drive (2WD or AWD depending on specific model variant, manual should clarify) Features Gear Selection: Automatic CVT, Hi/Lo Range, Neutral, Reverse 📐 Dimensions Exterior Length: Approx. 74.6 inches (1895 mm) Width: Approx. 43.7 inches (1109 mm) Height: Approx. 42.9 inches (1090 mm) Weights Dry Weight: Approx. 495 lbs (225 kg) Ground Clearance: Approx. 5.7 inches (145 mm) Capacity Fuel Capacity: 3.5 US Gallons (13.3 Liters) Towing Capacity: Not typically specified for this model, designed for trail use. Dimensions Wheelbase: Approx. 48.2 inches (1224 mm) 🛡️ Safety Features Ratings Crash Safety: N/A (ATV safety is assessed differently than passenger vehicles; emphasis on operator responsibility and design features.) Active Features Braking System: Hydraulic disc brakes offer reliable stopping power. Throttle Control: Thumb throttle with safety return spring. Passive Features Ergonomics: Handlebar design and seating position intended for rider control. Lighting: Headlights and taillight for visibility. Safety Recommendations Operator Gear: Always wear a helmet, eye protection, gloves, and appropriate riding apparel (detailed in owner's manual). 💡 Technology Features Infotainment Infotainment System: N/A (No integrated infotainment system on this model). Driver Assistance Driver Assistance Features: N/A (No electronic driver assistance features typical of modern vehicles). Connectivity Connectivity Options: N/A (No connectivity features). Lighting Tech...
Other 400cc class ATVs from manufacturers like Yamaha (Warrior/Banshee), Suzuki (QuadSport), Kawasaki (Bayou/Lakota), Can-Am (Outlander 400 predecessors).
Key Features
Engine Type:
2-stroke, liquid-cooled engine known for its power-to-weight ratio.
Drivetrain:
Shaft drive, providing reliability and reduced maintenance compared to chain drive.
Suspension:
Independent front suspension and a single rear shock absorber for improved ride comfort and handling.
Braking:
Hydraulic disc brakes on all wheels for consistent stopping power.
📋 Manual Details
Coverage Areas
Applicable Years:
1996, 1997, 1998
Target Audience:
Mechanical Technicians, Service Professionals, Enthusiasts
Page Count
Estimated Pages:
Comprehensive (Exact count not specified, but implied extensive)
Manual Type
Manual Category:
Workshop Service Manual
Language
Language:
English
Format
Delivery Format:
PDF Download
📖 Manual Coverage
Systems Covered
Engine Mechanical:
Full overhaul, repair, diagnostics, tuning of the 400cc 2-stroke engine.
Fuel System:
Carburetor service, fuel pump, fuel lines, fuel tank maintenance and repair.
Ignition System:
Ignition coil, spark plug, CDI unit, stator, wiring diagnostics and replacement.
Cooling System:
Radiator, coolant, fan, thermostat, hoses, and associated components.
Exhaust System:
Muffler, pipes, seals, and troubleshooting for emissions.
Refer to manual for specific interval (typically every 50-100 hours or annual).
Air Filter Cleaning:
Check and clean every few rides, replace as needed based on conditions.
Spark Plug Inspection:
Inspect and gap every 50 hours, replace as needed.
Brake Fluid Flush:
Recommended every 1-2 years or as per manual.
Coolant Flush:
Recommended every 2 years.
Fluid Specifications
Engine Oil:
Not applicable for 2-stroke premix/injection. For transmission: Polaris recommends specific ATV transmission fluid or equivalent SAE 80W-90 gear oil if specified in manual.
Brake Fluid:
DOT 3 or DOT 4 Hydraulic Brake Fluid (Confirm with manual).
Coolant Type:
Ethylene Glycol based antifreeze, 50/50 mix with distilled water.
Grease Type:
General Purpose Lithium Grease for lubrication points.
Known Issues
Carburetor Fouling:
Common in 2-strokes with infrequent use or poor fuel quality, leading to hard starting and poor running.
Cooling System Leaks:
Potential for hose degradation or radiator issues over time.
Drive Belt Wear Cvt:
CVT belts can wear and require replacement, particularly with aggressive riding or if proper cooling is compromised.
Suspension Bushings:
Wear on A-arm and steering bushings can lead to play and imprecise handling.
Electrical Connections:
Corrosion or loose connections can cause intermittent electrical faults.
📚 Vehicle History
Brand Heritage
Polarissport Heritage:
Polaris has a long history in powersports, evolving from snowmobiles to ATVs, known for innovation and performance.
Model Evolution
Xplorer Line:
The Xplorer line was part of Polaris's early ATV offerings, focusing on a balance of utility and trail performance. It preceded models like the Scrambler and Sportsman in some respects or offered a different niche. The 400cc 2-stroke was a popular engine size for performance-oriented trail riding.
Production
Manufacturing Location:
USA (Polaris manufacturing plants)
Key Development Era:
Mid-to-late 1990s, a period of significant growth and competition in the ATV market.
🏆 Awards & Recognition
Recognitions
Industry Awards:
No specific documented industry awards found for this particular model year, but Polaris as a brand has received numerous accolades for its overall ATV lineup.