Husqvarna TE 610E LT 1998 Factory Service Repair Manual
Preço normal
$133.00
Preço promocional
$133.00
Preço normal
Preço unitário
/ por
Promoção
Esgotado
🏷️ Basic Information Identification Make: Husqvarna Model: TE 610E LT Year: 1998 Codes Engine Code Identifier: TE610E LT 1998 👋 Introduction Market Position Segment: Dual-sport / Enduro motorcycle Target Audience: DIY enthusiasts, independent repair shops, Husqvarna owners Competitive Analysis Competitors Manuals: Comparable to factory workshop manuals from KTM, Aprilia, and other European dual-sport manufacturers of the era. Key Features Comprehensiveness: Detailed, step-by-step procedures for a wide range of repair and maintenance tasks. Diagrams Illustrations: Expected to include technical illustrations and diagrams for clarity. Utility: Indispensable tool for efficient and accurate servicing of the TE 610E LT. 📋 Manual Details Coverage Areas Primary Coverage: Repair and maintenance of Husqvarna TE 610E LT 1998 model Secondary Coverage: Adjustments, disassembly, assembly, troubleshooting Page Count Estimated Pages: 200+ Manual Type Type: Factory Service Repair Manual Language Language: English Format Format: PDF Download 📖 Manual Coverage Systems Covered Engine: Detailed engine disassembly, assembly, tuning, diagnostics, lubrication, cooling system Transmission: Clutch, gearbox, shifting mechanisms, oil specifications Fuel System: Carburetor (type specific, e.g., Mikuni/Dell'Orto), fuel pump, fuel lines, tank maintenance Ignition System: CDI, spark plug specifications, timing, troubleshooting Electrical System: Wiring diagrams, lighting, battery, starter, charging system, fuses, relays Suspension: Front fork (e.g., Marzocchi/WP) overhaul, rear shock absorber service, linkage maintenance, oil levels and types Brakes: Hydraulic brake systems (front and rear), caliper overhaul, master cylinder service, brake fluid specifications, bleeding procedures Wheels And Tires: Tire pressure recommendations, wheel bearing maintenance, spoke tensioning (if applicable), rim specifications Frame And Bodywork: Chassis inspection, subframe, body panel removal and installation, seat, handlebars Exhaust System: Exhaust pipe inspection, muffler service Procedures Included Maintenance: Regular service checks, oil changes, filter replacements, chain adjustment, lubrication points Repair: Component repair and replacement, internal engine work, transmission rebuilds, suspension servicing Disassembly Assembly: Step-by-step instructions for dismantling and reassembling all major vehicle components Troubleshooting: Diagnostic charts and guidance for identifying and resolving common and uncommon problems Adjustments: Carburetor tuning, chain slack, clutch lever free play, suspension settings Torque Specifications: Essential torque values for critical fasteners across all systems Technical Depth Depth: Comprehensive from basic maintenance to complete engine and transmission overhauls Diagnostic Capability: Advanced diagnostic procedures for electrical and mechanical systems Rebuild Instructions: Detailed instructions for rebuilding major components like engines and carburetors 📊 Manual Specifications File Format File Type: PDF Searchability: Likely text-searchable within the PDF Print Quality Quality: Variable, depends on original source; typically clear text and diagrams Binding Type Binding: Not applicable (PDF Download) Paper Type Paper: Not applicable (PDF Download) ⚙️ Engine Specifications Primary Engine Engine Type: Four-stroke, single-cylinder Displacement: Approximately 576cc (specific bore/stroke needed from manual) Cooling System: Liquid-cooled Bore X Stroke: Specific values available in manual Compression Ratio: Specific value available in manual Performance Horsepower: Estimated 45-50 HP (actual figures in manual) Torque: Specific figures available in manual Fuel System Carburetor Type: Likely Mikuni VM or Dell'Orto PHM (specific model in manual) Fuel Type: Unleaded gasoline Fuel Capacity: Approx. 12-14 liters (specifics in manual) 🔧 Transmission Standard Gearbox Type: 6-speed constant mesh Optional Options: N/A (standardized for this model) Features Clutch Type: Wet multi-plate Gear Ratios: Specific ratios documented in manual Final Drive: Chain drive Transmission Oil Type: Specific API GL-4 or GL-5, SAE 75W-90 or similar (verify in manual) 📐 Dimensions Exterior Length: Specifics documented in manual Width: Specifics documented in manual Height: Specifics documented in manual Weights Dry Weight: Approx. 130-140 kg (specifics in manual) Wet Weight: Specifics documented in manual Gvwr: Not typically specified for this class of motorcycle, but gross vehicle weight limits for payload would be in manual. 🛡️ Safety Features Ratings Crash Test Results: N/A (Motorcycles are not subjected to standardized automotive crash tests) Active Features Braking System: Hydraulic disc brakes front and rear Lighting: Headlight, taillight, brake light, turn signals (depending on LT specification) Passive Features Frame Construction: Steel trellis frame for rigidity and impact absorption Ergonomics: Designed for off-road control and stability. 💡 Technology Features Infotainment Features: Basic motorcycle instrumentation: speedometer, odometer, tachometer (optional), indicator lights. Driver Assistance Features: N/A (No electronic rider aids like ABS or traction control on this model). Connectivity Features: N/A (No modern connectivity features). 🔧 Maintenance Service Intervals Oil Change Interval: Typically every 3,000-5,000 km or annually (verify specific interval in manual). Air Filter Cleaning: Frequent checks, especially after off-road use, cleaning/replacement per manual recommendations. Spark Plug Replacement: Specific mileage interval documented in manual. Valve Clearance Check: Interval specified in manual, crucial for engine health. Chain Adjustment Lubrication: Regular checks and lubrication, interval depends on usage. Fluid Specifications Engine Oil Type: Specific viscosity grade (e.g., 10W-40, 20W-50) and API classification (e.g., SG, SH, SJ) provided in manual. Engine Oil Capacity: Specific volume in liters/quarts for oil change with filter change, provided in manual. Coolant Type: Ethylene glycol based antifreeze mixture with distilled water (specific ratio in manual). Brake Fluid Type: DOT 4 or DOT 5.1 hydraulic...
N/A (No electronic rider aids like ABS or traction control on this model).
Connectivity
Features:
N/A (No modern connectivity features).
🔧 Maintenance
Service Intervals
Oil Change Interval:
Typically every 3,000-5,000 km or annually (verify specific interval in manual).
Air Filter Cleaning:
Frequent checks, especially after off-road use, cleaning/replacement per manual recommendations.
Spark Plug Replacement:
Specific mileage interval documented in manual.
Valve Clearance Check:
Interval specified in manual, crucial for engine health.
Chain Adjustment Lubrication:
Regular checks and lubrication, interval depends on usage.
Fluid Specifications
Engine Oil Type:
Specific viscosity grade (e.g., 10W-40, 20W-50) and API classification (e.g., SG, SH, SJ) provided in manual.
Engine Oil Capacity:
Specific volume in liters/quarts for oil change with filter change, provided in manual.
Coolant Type:
Ethylene glycol based antifreeze mixture with distilled water (specific ratio in manual).
Brake Fluid Type:
DOT 4 or DOT 5.1 hydraulic brake fluid (verify exact specification in manual).
Known Issues
Common Wear Items:
Clutch plates, chain and sprockets, wheel bearings, fork seals are common wear items on dual-sports.
Electrical Gremlins:
Older European bikes can sometimes exhibit minor electrical connection issues if not maintained.
Carburetor Tuning:
May require periodic fine-tuning for optimal performance and fuel economy, especially with altitude changes.
📚 Vehicle History
Brand Heritage
Manufacturer Origin:
Swedish motorcycle manufacturer with a long history in off-road racing.
Model Evolution
Te Series:
The TE series has a lineage of high-performance off-road and dual-sport motorcycles, with the 610 model being a popular displacement size.
1998 Updates:
Specific updates for 1998 are detailed in the manual, potentially including chassis refinements, engine tuning, or suspension components.
Production
Manufacturing Location:
Likely Italy, as Husqvarna was owned by Cagiva Group during this period.
🏆 Awards & Recognition
Recognitions
Market Reputation:
The TE 610E LT is recognized as a robust and capable dual-sport machine, appreciated for its off-road prowess and reliability when properly maintained.
Ao escolher uma seleção, a página inteira é atualizada.