Allis Chalmers Model 170 175 Tractor Factory Service Repair Manual
Preço normal
$141.00
Preço promocional
$141.00
Preço normal
Preço unitário
/ por
Promoção
Esgotado
🏷️ Basic Information Identification Make: Allis-Chalmers Model: 170/175 Tractor Product Name: Allis Chalmers Model 170 175 Tractor Factory Service Repair Manual Product Type: Factory Service Repair Manual 👋 Introduction Market Position Target Audience: Allis-Chalmers tractor owners, mechanics, and restoration specialists. Competitive Analysis Value Proposition: Provides comprehensive, factory-authorized repair and maintenance information, enabling cost savings on repairs and proper vehicle upkeep. Key Features Information Access: Organized with a table of contents for easy navigation and quick access to specific repair procedures. Innovative Features: Addresses the repair and maintenance of advanced features present on the Model 170/175 tractors of its era. 📋 Manual Details Coverage Areas Primary Coverage: Service, Repair, Maintenance, Troubleshooting Secondary Coverage: Wiring Diagrams, Specifications Page Count Estimated Page Count: Likely 500+ pages (typical for factory service manuals of this era) Manual Type Manual Type: Factory Service Manual / Workshop Manual Language Language: English Format Format: PDF 📖 Manual Coverage Systems Covered Engine: Detailed overhaul, diagnostics, tuning, cooling system, lubrication system, fuel system, exhaust system Transmission: Repair and overhaul of powershift, manual, and differential lock systems Hydraulics: Service and repair of hydraulic pump, valves, cylinders, and hitch systems Electrical: Wiring diagrams, starter, alternator, lighting, instrument panel diagnostics, troubleshooting Chassis And Steering: Front axle, rear axle, steering system overhaul and adjustments Brakes: Service and repair of brake systems (likely mechanical and/or hydraulic depending on configuration) Body And Frame: Body panel removal, adjustments, frame inspection Procedures Included Maintenance: Scheduled maintenance, fluid changes, lubrication, filter replacement, pre-operation checks Troubleshooting: Systematic diagnosis of common and uncommon problems with diagnostic flowcharts Repair: Step-by-step instructions for component removal, disassembly, inspection, repair, assembly, and installation Rebuilding: Comprehensive rebuild procedures for major components like engine, transmission, and hydraulic systems Adjustments: Precise adjustments for clutch, brakes, engine timing, hydraulic pressures, etc. Technical Depth Depth: Factory-level diagnostic and repair procedures, suitable for professional mechanics and experienced DIY users. 📊 Manual Specifications File Format File Type: PDF Readability: Searchable text within the PDF, enabling quick information retrieval. Compatibility: Compatible with Adobe PDF Reader and usable on all versions of Windows & Mac. Print Quality Printability: Printable pages for convenient workshop use. Binding Type Binding Type: Digital Download (PDF) Paper Type Paper Type: N/A (Digital Format) ⚙️ Engine Specifications Primary Engine Engine Type: Diesel (typically a Perkins or Allis-Chalmers diesel engine, specific model to be confirmed via VIN/engine serial) Displacement: Likely in the range of 200-300 cubic inches (e.g., 230, 242, 253 cu. in. depending on specific variant) Bore X Stroke: Specifics will be detailed in the manual, critical for engine rebuilds. Compression Ratio: Specified in manual for diagnostics and rebuilds. Performance Horsepower: Typically in the 50-70 PTO horsepower range, exact figures vary by engine option and model variant. Torque: Specified in manual for performance tuning and diagnostics. Fuel System Fuel Type: Diesel Injection System: Likely direct injection with rotary or inline injection pump (e.g., CAV, Bosch). Fuel Filters: Details on primary, secondary fuel filter replacement and specifications. 🔧 Transmission Standard Transmission Type: Allis-Chalmers Power Director (powershift) transmission is a hallmark feature, alongside a standard manual gearbox option. Optional Optional Gearbox: Likely a 8-speed or 10-speed constant mesh transmission, depending on the specific configuration. Features Powershift Operation: Detailed procedures for troubleshooting and repairing the Power Director hydraulic system and clutch packs. Differential Lock: Operation and service of the differential lock mechanism. Fluid Specifications Transmission Fluid: Manual will specify required fluid type (e.g., John Deere Hy-Gard, or equivalent universal tractor fluid) and capacity. 📐 Dimensions Exterior Wheelbase: Approximate 80-90 inches, depending on configuration. Overall Length: Approximate 130-140 inches. Overall Width: Approximate 65-75 inches at rear wheels. Weights Operating Weight: Around 5000-6000 lbs, without ballast. Drawbar Horsepower: Manual will provide specifications for drawbar pull and related calculations. 🛡️ Safety Features Ratings Rollover Protection: ROPS (Rollover Protective Structure) installation and maintenance guidance may be included or referenced, depending on original factory options. Active Features Safety Switches: Information on clutch safety switches, PTO engagement interlocks. Passive Features Lighting: Headlights, taillights, and work lights wiring and troubleshooting. 💡 Technology Features Infotainment Instrument Panel: Includes tachometer, oil pressure gauge, temperature gauge, fuel gauge, and warning lights. Manual covers diagnostics. Driver Assistance Power Steering: Hydraulic power steering system service and repair procedures. Connectivity Pto System: Service and maintenance of the PTO (Power Take-Off) system, including engagement and functionality. 🔧 Maintenance Service Intervals Engine Oil Change: Typically every 100-200 operating hours, specific recommendations in manual. Hydraulic Fluid Change: Typically annually or every 500 operating hours, consult manual. Fuel Filter Replacement: Regular replacement interval, e.g., every 200-300 hours or as specified. Fluid Specifications Engine Oil: Manual will specify API service classification and viscosity grade (e.g., SAE 30 or 15W-40 for diesel). Coolant: Manual will detail coolant type (e.g., ethylene glycol based) and mixture ratio for optimal protection. Grease Type: Specifications for various grease points (e.g., multi-purpose lithium grease). Known Issues Common...
Systematic diagnosis of common and uncommon problems with diagnostic flowcharts
Repair:
Step-by-step instructions for component removal, disassembly, inspection, repair, assembly, and installation
Rebuilding:
Comprehensive rebuild procedures for major components like engine, transmission, and hydraulic systems
Adjustments:
Precise adjustments for clutch, brakes, engine timing, hydraulic pressures, etc.
Technical Depth
Depth:
Factory-level diagnostic and repair procedures, suitable for professional mechanics and experienced DIY users.
📊 Manual Specifications
File Format
File Type:
PDF
Readability:
Searchable text within the PDF, enabling quick information retrieval.
Compatibility:
Compatible with Adobe PDF Reader and usable on all versions of Windows & Mac.
Print Quality
Printability:
Printable pages for convenient workshop use.
Binding Type
Binding Type:
Digital Download (PDF)
Paper Type
Paper Type:
N/A (Digital Format)
⚙️ Engine Specifications
Primary Engine
Engine Type:
Diesel (typically a Perkins or Allis-Chalmers diesel engine, specific model to be confirmed via VIN/engine serial)
Displacement:
Likely in the range of 200-300 cubic inches (e.g., 230, 242, 253 cu. in. depending on specific variant)
Bore X Stroke:
Specifics will be detailed in the manual, critical for engine rebuilds.
Compression Ratio:
Specified in manual for diagnostics and rebuilds.
Performance
Horsepower:
Typically in the 50-70 PTO horsepower range, exact figures vary by engine option and model variant.
Torque:
Specified in manual for performance tuning and diagnostics.
Fuel System
Fuel Type:
Diesel
Injection System:
Likely direct injection with rotary or inline injection pump (e.g., CAV, Bosch).
Fuel Filters:
Details on primary, secondary fuel filter replacement and specifications.
🔧 Transmission
Standard
Transmission Type:
Allis-Chalmers Power Director (powershift) transmission is a hallmark feature, alongside a standard manual gearbox option.
Optional
Optional Gearbox:
Likely a 8-speed or 10-speed constant mesh transmission, depending on the specific configuration.
Features
Powershift Operation:
Detailed procedures for troubleshooting and repairing the Power Director hydraulic system and clutch packs.
Differential Lock:
Operation and service of the differential lock mechanism.
Fluid Specifications
Transmission Fluid:
Manual will specify required fluid type (e.g., John Deere Hy-Gard, or equivalent universal tractor fluid) and capacity.
📐 Dimensions
Exterior
Wheelbase:
Approximate 80-90 inches, depending on configuration.
Overall Length:
Approximate 130-140 inches.
Overall Width:
Approximate 65-75 inches at rear wheels.
Weights
Operating Weight:
Around 5000-6000 lbs, without ballast.
Drawbar Horsepower:
Manual will provide specifications for drawbar pull and related calculations.
🛡️ Safety Features
Ratings
Rollover Protection:
ROPS (Rollover Protective Structure) installation and maintenance guidance may be included or referenced, depending on original factory options.
Active Features
Safety Switches:
Information on clutch safety switches, PTO engagement interlocks.
Passive Features
Lighting:
Headlights, taillights, and work lights wiring and troubleshooting.
💡 Technology Features
Infotainment
Instrument Panel:
Includes tachometer, oil pressure gauge, temperature gauge, fuel gauge, and warning lights. Manual covers diagnostics.
Driver Assistance
Power Steering:
Hydraulic power steering system service and repair procedures.
Connectivity
Pto System:
Service and maintenance of the PTO (Power Take-Off) system, including engagement and functionality.
🔧 Maintenance
Service Intervals
Engine Oil Change:
Typically every 100-200 operating hours, specific recommendations in manual.
Hydraulic Fluid Change:
Typically annually or every 500 operating hours, consult manual.
Fuel Filter Replacement:
Regular replacement interval, e.g., every 200-300 hours or as specified.
Fluid Specifications
Engine Oil:
Manual will specify API service classification and viscosity grade (e.g., SAE 30 or 15W-40 for diesel).
Coolant:
Manual will detail coolant type (e.g., ethylene glycol based) and mixture ratio for optimal protection.
Grease Type:
Specifications for various grease points (e.g., multi-purpose lithium grease).
Known Issues
Common Problems:
Potential issues include hydraulic leaks, wear in the Power Director clutch packs, starter motor issues, and fuel system clogging. Manual provides solutions.
📚 Vehicle History
Brand Heritage
Manufacturer:
Allis-Chalmers, a prominent American manufacturer of agricultural and industrial machinery.
Model Evolution
Production Era:
Produced in the late 1960s and 1970s, representing a key generation of Allis-Chalmers tractors.
Production
Manufacturing Location:
Typically manufactured in the United States.
Ao escolher uma seleção, a página inteira é atualizada.