2000 Ford ESCORT Workshop OEM Service diy Repair Manual

Preço normal: $141.00
Preço promocional: $141.00
Preço normal
Preço unitário: por

🏷️ Basic Information Identification Make: Ford Model: Escort Year: 2000 Codes Chassis Code: Escort V (GF/LAE) for North American models 👋 Introduction Market Position Segment: Compact car segment Target Audience: Affordable, practical transportation for individuals and small families. Competitive Analysis Key Competitors: Honda Civic, Toyota Corolla, Chevrolet Cavalier, Nissan Sentra, Dodge Neon. Key Features Strengths: Affordability, spacious interior for its class, decent fuel economy, availability of various engine and trim options. Weaknesses: Mediocre performance in some variants, interior material quality, dated design by 2000, some reliability concerns reported by owners. 📋 Manual Details Coverage Areas Covered Models: 2000 Ford Escort (all US/North American variants) Trim Levels Covered: All trim levels (e.g., LX, SE, Zetec, GT) Page Count Estimated Pages: 1500-2000 (based on typical OEM service manual scope for this era) Manual Type Type: OEM Workshop Service Manual Language Language: English Format Format: PDF 📖 Manual Coverage Systems Covered Engine Mechanical: Engine assembly, disassembly, cylinder head, block, crankshaft, pistons, connecting rods, camshafts, timing, lubrication system, cooling system, fuel system, intake manifold, exhaust manifold. Engine Management: Ignition system, fuel injection (EFI), emissions control systems, sensors (MAP, TPS, ECT, O2, CKP, CMP), actuators, OBD-II diagnostics, powertrain control module (PCM). Transmission Manual: Clutch system, gear selection, transmission disassembly and assembly, internal components, shifting mechanisms, torque specifications. Transmission Automatic: Torque converter, valve body, internal gears, clutches, bands, hydraulic control system, transmission fluid (ATF) specifications, electronic control module (TCM) interface. Drivetrain: Front-wheel drive system, CV axles, differential, driveshafts, wheel bearings. Suspension: Front suspension (MacPherson struts, control arms, sway bar), rear suspension (torsion beam axle or independent suspension depending on specific variant), shock absorbers, springs, bushings, alignment specifications. Steering: Power steering system, steering rack, steering column, tie rod ends, steering angle sensor, hydraulic pump, fluid specifications. Brakes: Front disc brakes, rear drum or disc brakes, hydraulic system (master cylinder, brake lines, calipers, wheel cylinders), parking brake system, ABS (Anti-lock Braking System) components and diagnostics, brake fluid specifications. Electrical System: Battery, charging system (alternator, regulator), starting system (starter motor), ignition switch, lighting system (headlights, taillights, interior lights), fuses, relays, wiring diagrams, connectors, multiplexing (if applicable). Body And Interior: Body panel removal/installation, door mechanisms, window regulators, interior trim, seats, dashboard, HVAC system (heating, ventilation, air conditioning), body control module (BCM). HVAC: Refrigerant R-134a, compressor, condenser, evaporator, expansion valve, blower motor, climate control module, diagnostic procedures, refrigerant handling. Safety Systems: Airbag system (SRS - Supplemental Restraint System) components, sensors, control module, pre-tensioners, seat belts. Procedures Included Preventative Maintenance: Oil changes, filter replacements, fluid checks and changes (coolant, brake, power steering, transmission), spark plug replacement, belt inspection/replacement, tire rotation/balancing, air filter replacement. Troubleshooting: Diagnostic charts, symptom-based troubleshooting, fault code interpretation (DTC), component testing procedures, wiring schematic analysis. Repair And Overhaul: Engine component replacement (e.g., head gasket, timing belt, water pump), transmission overhaul, brake caliper/rotor replacement, strut replacement, power steering pump replacement, starter/alternator replacement. Diagnostics: OBD-II scanner use, live data interpretation, component testing using multimeter and oscilloscope, pressure testing (fuel, coolant), vacuum testing. Specifications And Tolerances: Torque specifications for all fasteners, engine clearances (piston-to-wall, bearing clearance), suspension component torques, electrical resistance values. Technical Depth Depth: Comprehensive factory-level detail, suitable for professional technicians and advanced DIY enthusiasts. Includes step-by-step instructions, diagrams, schematics, and diagnostic flowcharts. 📊 Manual Specifications File Format Format: Portable Document Format (PDF) Searchability: Likely searchable text, enabling quick access to specific information. Print Quality Quality: High-resolution scans of original OEM documentation, ensuring clarity of text and diagrams. Binding Type Binding: Not applicable (digital PDF format) Paper Type Paper: Not applicable (digital PDF format) ⚙️ Engine Specifications Primary Engine Engine Code: Zetec-R (SPI) and Zetec-E Displacement Spi: 1.9 Liters (1855 cc) Configuration Spi: Inline 4-cylinder, SOHC (Single Overhead Camshaft) Horsepower Spi: 90 hp @ 4800 rpm Torque Spi: 116 lb-ft @ 3000 rpm Displacement Zetec: 2.0 Liters (1988 cc) Configuration Zetec: Inline 4-cylinder, DOHC (Dual Overhead Camshaft) Horsepower Zetec: 114 hp @ 5000 rpm (standard), 125 hp @ 5500 rpm (Zetec SE/GT models) Torque Zetec: 125 lb-ft @ 3200 rpm (standard), 130 lb-ft @ 3750 rpm (Zetec SE/GT models) Fuel System Fuel Delivery: Electronic Fuel Injection (EFI) Fuel Type: Unleaded gasoline, 87 octane recommended Performance 0 60 Mph Spi: Approx. 12-13 seconds 0 60 Mph Zetec: Approx. 9-10 seconds 🔧 Transmission Standard Type Spi: 5-speed manual transaxle Type Zetec: 5-speed manual transaxle Optional Type Spi: 4-speed automatic transaxle Type Zetec: 4-speed automatic transaxle Features Fluid Type Auto: Mercon V or equivalent ATF Fluid Capacity Auto: Approx. 7.5 quarts (7.1 liters) for a complete drain and fill 📐 Dimensions Exterior Length: Approx. 170.4 inches (4328 mm) Width: Approx. 67.5 inches (1715 mm) Height: Approx. 54.5 inches (1384 mm) for sedan, 55.8 inches (1417 mm) for wagon Wheelbase: Approx. 103.1 inches (2619 mm) Front Track: Approx. 58.5 inches (1486 mm) Rear Track: Approx. 57.5 inches (1460 mm) Weights Curb Weight Spi: Approx. 2500-2650...

17 people are viewing this right now

Tipo: Car

Fabricante:

Sku: 561527

Coleções: ALL Ford

Disponibilidade: Em estoque

Tag: 2000 Car ESCORT Ford

Variantes do produto

Description

🏷️ Basic Information

Identification

Make:

Model:

Escort

Year:

Codes

Chassis Code:

Escort V (GF/LAE) for North American models

👋 Introduction

Market Position

Segment:

Compact car segment

Target Audience:

Affordable, practical transportation for individuals and small families.

Competitive Analysis

Key Competitors:

Honda Civic, Toyota Corolla, Chevrolet Cavalier, Nissan Sentra, Dodge Neon.

Key Features

Strengths:

Affordability, spacious interior for its class, decent fuel economy, availability of various engine and trim options.

Weaknesses:

Mediocre performance in some variants, interior material quality, dated design by 2000, some reliability concerns reported by owners.

📋 Manual Details

Coverage Areas

Covered Models:

2000 Ford Escort (all US/North American variants)

Trim Levels Covered:

All trim levels (e.g., LX, SE, Zetec, GT)

Page Count

Estimated Pages:

1500-2000 (based on typical OEM service manual scope for this era)

Manual Type

Type:

OEM Workshop Service Manual

Language

Language:

English

Format

Format:

📖 Manual Coverage

Systems Covered

Engine Mechanical:

Engine assembly, disassembly, cylinder head, block, crankshaft, pistons, connecting rods, camshafts, timing, lubrication system, cooling system, fuel system, intake manifold, exhaust manifold.

Engine Management:

Ignition system, fuel injection (EFI), emissions control systems, sensors (MAP, TPS, ECT, O2, CKP, CMP), actuators, OBD-II diagnostics, powertrain control module (PCM).

Transmission Manual:

Clutch system, gear selection, transmission disassembly and assembly, internal components, shifting mechanisms, torque specifications.

Transmission Automatic:

Torque converter, valve body, internal gears, clutches, bands, hydraulic control system, transmission fluid (ATF) specifications, electronic control module (TCM) interface.

Drivetrain:

Front-wheel drive system, CV axles, differential, driveshafts, wheel bearings.

Suspension:

Front suspension (MacPherson struts, control arms, sway bar), rear suspension (torsion beam axle or independent suspension depending on specific variant), shock absorbers, springs, bushings, alignment specifications.

Steering:

Power steering system, steering rack, steering column, tie rod ends, steering angle sensor, hydraulic pump, fluid specifications.

Brakes:

Front disc brakes, rear drum or disc brakes, hydraulic system (master cylinder, brake lines, calipers, wheel cylinders), parking brake system, ABS (Anti-lock Braking System) components and diagnostics, brake fluid specifications.

Electrical System:

Battery, charging system (alternator, regulator), starting system (starter motor), ignition switch, lighting system (headlights, taillights, interior lights), fuses, relays, wiring diagrams, connectors, multiplexing (if applicable).

Body And Interior:

Body panel removal/installation, door mechanisms, window regulators, interior trim, seats, dashboard, HVAC system (heating, ventilation, air conditioning), body control module (BCM).

HVAC:

Refrigerant R-134a, compressor, condenser, evaporator, expansion valve, blower motor, climate control module, diagnostic procedures, refrigerant handling.

Safety Systems:

Airbag system (SRS - Supplemental Restraint System) components, sensors, control module, pre-tensioners, seat belts.

Procedures Included

Preventative Maintenance:

Oil changes, filter replacements, fluid checks and changes (coolant, brake, power steering, transmission), spark plug replacement, belt inspection/replacement, tire rotation/balancing, air filter replacement.

Troubleshooting:

Diagnostic charts, symptom-based troubleshooting, fault code interpretation (DTC), component testing procedures, wiring schematic analysis.

Repair And Overhaul:

Engine component replacement (e.g., head gasket, timing belt, water pump), transmission overhaul, brake caliper/rotor replacement, strut replacement, power steering pump replacement, starter/alternator replacement.

Diagnostics:

OBD-II scanner use, live data interpretation, component testing using multimeter and oscilloscope, pressure testing (fuel, coolant), vacuum testing.

Specifications And Tolerances:

Torque specifications for all fasteners, engine clearances (piston-to-wall, bearing clearance), suspension component torques, electrical resistance values.

Technical Depth

Depth:

Comprehensive factory-level detail, suitable for professional technicians and advanced DIY enthusiasts. Includes step-by-step instructions, diagrams, schematics, and diagnostic flowcharts.

📊 Manual Specifications

File Format

Format:

Portable Document Format (PDF)

Searchability:

Likely searchable text, enabling quick access to specific information.

Print Quality

Quality:

High-resolution scans of original OEM documentation, ensuring clarity of text and diagrams.

Binding Type

Binding:

Not applicable (digital PDF format)

Paper Type

Paper:

Not applicable (digital PDF format)

⚙️ Engine Specifications

Primary Engine

Engine Code:

Zetec-R (SPI) and Zetec-E

Displacement Spi:

1.9 Liters (1855 cc)

Configuration Spi:

Inline 4-cylinder, SOHC (Single Overhead Camshaft)

Horsepower Spi:

90 hp @ 4800 rpm

Torque Spi:

116 lb-ft @ 3000 rpm

Displacement Zetec:

2.0 Liters (1988 cc)

Configuration Zetec:

Inline 4-cylinder, DOHC (Dual Overhead Camshaft)

Horsepower Zetec:

114 hp @ 5000 rpm (standard), 125 hp @ 5500 rpm (Zetec SE/GT models)

Torque Zetec:

125 lb-ft @ 3200 rpm (standard), 130 lb-ft @ 3750 rpm (Zetec SE/GT models)

Fuel System

Fuel Delivery:

Electronic Fuel Injection (EFI)

Fuel Type:

Unleaded gasoline, 87 octane recommended

Performance

0 60 Mph Spi:

Approx. 12-13 seconds

0 60 Mph Zetec:

Approx. 9-10 seconds

🔧 Transmission

Standard

Type Spi:

5-speed manual transaxle

Type Zetec:

5-speed manual transaxle

Optional

Type Spi:

4-speed automatic transaxle

Type Zetec:

4-speed automatic transaxle

Features

Fluid Type Auto:

Mercon V or equivalent ATF

Fluid Capacity Auto:

Approx. 7.5 quarts (7.1 liters) for a complete drain and fill

📐 Dimensions

Exterior

Length:

Approx. 170.4 inches (4328 mm)

Width:

Approx. 67.5 inches (1715 mm)

Height:

Approx. 54.5 inches (1384 mm) for sedan, 55.8 inches (1417 mm) for wagon

Wheelbase:

Approx. 103.1 inches (2619 mm)

Front Track:

Approx. 58.5 inches (1486 mm)

Rear Track:

Approx. 57.5 inches (1460 mm)

Weights

Curb Weight Spi:

Approx. 2500-2650 lbs (1134-1202 kg)

Curb Weight Zetec:

Approx. 2600-2800 lbs (1179-1270 kg)

Gross Vehicle Weight Rating Gvwr:

Approx. 3500-3700 lbs (1588-1678 kg)

Cargo

Cargo Volume Sedan:

Approx. 13.0 cubic feet

Cargo Volume Wagon:

Approx. 37.0 cubic feet (seats up), 65.0 cubic feet (seats down)

🛡️ Safety Features

Ratings

NHTSA Rollover Rating:

4 out of 5 stars (for most configurations)

Active Features

Optional on most trims, standard on higher trims (e.g., GT).

Passive Features

Airbags:

Dual front airbags (driver and passenger) standard.

Seatbelts:

3-point seatbelts in all seating positions, pretensioners for front seats.

💡 Technology Features

Infotainment

Audio System:

Factory AM/FM stereo with cassette player and optional CD player. Basic speaker configurations.

Climate Control:

Manual HVAC controls with physical knobs and sliders for temperature, fan speed, and air direction. Optional automatic climate control on some higher trims.

Driver Assistance

Cruise Control:

Standard on most trims, with steering wheel mounted controls.

Keyless Entry:

Optional keyless entry system with remote fob.

Connectivity

Auxiliary Input:

Not typically available in factory audio systems of this era.

🔧 Maintenance

Service Intervals

Oil Change Interval:

Every 5,000 miles (8,000 km) or 6 months, whichever comes first. Check manual for severe driving conditions.

Air Filter Replacement:

Every 15,000 miles (24,000 km) or 12 months.

Spark Plug Replacement Spi:

Every 100,000 miles (160,000 km) with platinum-tipped plugs.

Spark Plug Replacement Zetec:

Every 100,000 miles (160,000 km) with platinum-tipped plugs.

Coolant Flush:

Every 30,000 miles (48,000 km) or 2 years.

Transmission Fluid Change Auto:

Every 50,000 miles (80,000 km) or 4 years.

Timing Belt Replacement Spi:

Non-interference engine, but recommended replacement around 100,000 miles (160,000 km).

Timing Belt Replacement Zetec:

Interference engine. Replacement recommended every 60,000-100,000 miles (96,000-160,000 km). Critical to replace to prevent engine damage.

Fluid Specifications

Engine Oil:

5W-30 or 5W-20 (check owner's manual for specific recommendations and API service classification).

Coolant:

Ford Premium Engine Coolant (green) or equivalent ethylene glycol-based coolant, mixed 50/50 with distilled water.

Brake Fluid:

DOT 3 brake fluid.

Power Steering Fluid:

Mercon V or equivalent automatic transmission fluid (ATF).

Known Issues

Common Problems:

Transmission issues (automatic), ignition coil failures, coolant leaks (water pump, hoses), O2 sensor failures, front suspension wear (ball joints, tie rods), rust (especially in northern climates).

📚 Vehicle History

Brand Heritage

Ford History:

Ford Motor Company, a major American automaker, has a long history of producing reliable and affordable vehicles since its founding in 1903.

Model Evolution

Escort Generations North America:

The 2000 model represents the final year of the fifth generation (GF/LAE) Escort in North America, which was introduced in 1997.

Design Origin:

The fifth-generation Escort was based on the global Ford Escort platform, with significant redesigns for the North American market.

Production

Assembly Locations:

Wayne, Michigan, USA; Hermosillo, Sonora, Mexico.

Production Years

Fifth Gen North America:

1997-2003 (though the 'Escort' nameplate was phased out in favor of 'Focus' for later models within this generation's lifespan).

🏆 Awards & Recognition

Recognitions

Safety Awards:

Varied safety ratings from NHTSA and IIHS for different model years and body styles within the generation. The 2000 model generally performed adequately for its class and time.

Ratings

Fuel Economy Ratings:

Good for its class, with EPA estimates typically in the range of 24-27 MPG city and 30-35 MPG highway, depending on engine and transmission.