🏷️ Basic Information Identification Make: Jaguar Model: XF Model Variant: XFR Chassis Code: X250 Model Years Covered: 2008, 2009, 2010 👋 Introduction Market Position Positioning: The Jaguar XF (X250) represented Jaguar's entry into the modern luxury sports sedan segment, aiming to blend traditional Jaguar refinement with contemporary styling and performance. Competitive Analysis Competitors: Competed with established German luxury sedans such as the BMW 5 Series, Mercedes-Benz E-Class, and Audi A6, as well as the Lexus GS and Cadillac STS. Key Features Design Philosophy: Characterized by a distinctive feline stance, a flowing interior design with a rising center console, and a focus on driver engagement and comfort. Performance Variants: Offered a range of potent engines, including the performance-oriented XFR model featuring a supercharged V8. Manual Value Proposition Benefit To Owner: Provides access to the same authoritative technical information used by Jaguar technicians, enabling owners to perform complex maintenance, diagnostics, and repairs, thereby saving significant costs on dealership labor. 📋 Manual Details Coverage Areas Primary Focus: Workshop Service and Maintenance Engine Variants Covered: 2.7L TDV6 Diesel, 3.0L V6 Petrol, 4.2L V8 Petrol, 4.2L V8 Supercharged (XFR) Key Systems Included: Engine, Transmission, Drivetrain, Suspension, Steering, Brakes, Electrical Systems, Bodywork, Climate Control, Interior Systems, Diagnostics Page Count Estimated Pages: 3500+ Manual Type Type: Official Workshop Manual / Service Manual Language Language: English Format Format: PDF 📖 Manual Coverage Systems Covered Engine Mechanical: Complete overhaul procedures, component identification, timing belt/chain routing, lubrication, cooling system, fuel system, exhaust system, engine mounts, vibration dampers. Engine Performance: Engine tuning, emissions control, turbocharger/supercharger systems (for XFR). Transmission: Automatic transmission service, removal, installation, fluid changes, electronic control unit (ECU) diagnostics, torque converter procedures. Drivetrain: Driveshafts, differentials, AWD systems (if applicable), hub bearings, CV joints. Suspension: Front and rear suspension component identification, removal/installation, spring and damper replacement, bushing services, chassis alignment specifications. Steering: Power steering system service, hydraulic pump, steering rack, column, linkages, alignment procedures. Brakes: Hydraulic system, ABS, EBD, DSC components, brake pad/rotor replacement, caliper servicing, brake fluid specifications, bleeding procedures, parking brake system. Electrical Systems: Wiring diagrams, component locations, fuse/relay identification, battery, charging system, starter motor, lighting systems (headlights, taillights, interior), power windows, mirrors, locks, ignition system. Bodywork And Trim: Exterior panel removal/installation, interior trim components, door mechanisms, hood, trunk, bumper systems, glass replacement, seals and weatherstripping. Climate Control: HVAC system components, refrigerant handling, A/C compressor, condenser, evaporator, blower motor, control modules, diagnostics. Instrumentation And Controls: Instrument cluster diagnostics, gauge operation, switchgear, SRS (Airbag) system information, driver controls, central locking, immobilizer. Diagnostics: Diagnostic Trouble Codes (DTCs), fault finding procedures, OBD-II (On-Board Diagnostics) information, use of diagnostic tools. Procedures Included Maintenance Schedule: Factory recommended maintenance intervals for oil changes, filter replacements, fluid checks, inspections, and major service items. Troubleshooting: Systematic troubleshooting guides for common and uncommon issues, symptom-based diagnostics. Repair Procedures: Step-by-step repair instructions for all major vehicle systems and components. Removal Installation: Detailed instructions for removing and reinstalling components, from small parts to major assemblies. Torque Settings: Comprehensive list of essential torque specifications for critical fasteners across all systems. Belt Routing: Diagrams and instructions for serpentine and timing belt routing. Fluid Specifications: Detailed recommendations for all fluids including engine oil, transmission fluid, brake fluid, coolant, power steering fluid, and more. Diagnostic Codes: Listing and interpretation of Diagnostic Trouble Codes (DTCs) with associated causes and solutions. Technical Depth Depth: Comprehensive, covering basic to advanced diagnostics and repair. Suitable for professional technicians and skilled DIY enthusiasts. 📊 Manual Specifications File Format Digital Format: PDF (Portable Document Format) Print Quality Quality: High-resolution scans of official documentation, ensuring clarity of text and diagrams. Binding Type Binding: N/A (Digital PDF) Paper Type Paper Type: N/A (Digital PDF) ⚙️ Engine Specifications Primary Engine 2.7D Tdv6 Engine Code: AJD-V6 (often referred to as 276DT) Configuration: 2.7-liter V6 Twin-Turbo Diesel Horsepower Ps: 204 PS (at 4000 rpm) Torque Nm: 435 Nm (at 1900 rpm) Primary Engine 3.0L V6 Engine Code: 306PS (Naturally Aspirated V6) Configuration: 3.0-liter V6 Naturally Aspirated Petrol Horsepower Ps: 238 PS (at 6800 rpm) Torque Nm: 293 Nm (at 4100 rpm) Primary Engine 4.2L V8 Engine Code: 4235cc V8 (Naturally Aspirated) Configuration: 4.2-liter V8 Naturally Aspirated Petrol Horsepower Ps: 298 PS (at 6000 rpm) Torque Nm: 411 Nm (at 4100 rpm) Primary Engine 4.2L V8 Xfr Engine Code: 4235cc V8 S/C (Supercharged) Configuration: 4.2-liter V8 Supercharged Petrol Horsepower Ps: 510 PS (at 6000 rpm) Torque Nm: 625 Nm (at 3500 rpm) Fuel System Injection Type: Direct Injection (TDV6), Port Injection (Petrol V6 & V8), Supercharged (XFR) 🔧 Transmission Standard Transmission Type: 6-speed ZF Automatic (e.g., 6HP26/6HP28) Optional Transmission Availability: N/A for these model years and engines; automatic was standard. Features Gear Modes: Sequential shift capability, often with Adaptive Shift Control (ASC) and Winter/Sport modes. Fluid Type Specification: Typically ZF Lifeguardfluid (e.g., Lifeguardfluid 6 for 6HP26/28 transmissions). Refer to manual for exact part numbers and...
The Jaguar XF (X250) represented Jaguar's entry into the modern luxury sports sedan segment, aiming to blend traditional Jaguar refinement with contemporary styling and performance.
Competitive Analysis
Competitors:
Competed with established German luxury sedans such as the BMW 5 Series, Mercedes-Benz E-Class, and Audi A6, as well as the Lexus GS and Cadillac STS.
Key Features
Design Philosophy:
Characterized by a distinctive feline stance, a flowing interior design with a rising center console, and a focus on driver engagement and comfort.
Performance Variants:
Offered a range of potent engines, including the performance-oriented XFR model featuring a supercharged V8.
Manual Value Proposition
Benefit To Owner:
Provides access to the same authoritative technical information used by Jaguar technicians, enabling owners to perform complex maintenance, diagnostics, and repairs, thereby saving significant costs on dealership labor.
Engine tuning, emissions control, turbocharger/supercharger systems (for XFR).
Transmission:
Automatic transmission service, removal, installation, fluid changes, electronic control unit (ECU) diagnostics, torque converter procedures.
Drivetrain:
Driveshafts, differentials, AWD systems (if applicable), hub bearings, CV joints.
Suspension:
Front and rear suspension component identification, removal/installation, spring and damper replacement, bushing services, chassis alignment specifications.
Steering:
Power steering system service, hydraulic pump, steering rack, column, linkages, alignment procedures.
Exterior panel removal/installation, interior trim components, door mechanisms, hood, trunk, bumper systems, glass replacement, seals and weatherstripping.
Climate Control:
HVAC system components, refrigerant handling, A/C compressor, condenser, evaporator, blower motor, control modules, diagnostics.
Instrumentation And Controls:
Instrument cluster diagnostics, gauge operation, switchgear, SRS (Airbag) system information, driver controls, central locking, immobilizer.
Diagnostics:
Diagnostic Trouble Codes (DTCs), fault finding procedures, OBD-II (On-Board Diagnostics) information, use of diagnostic tools.
Procedures Included
Maintenance Schedule:
Factory recommended maintenance intervals for oil changes, filter replacements, fluid checks, inspections, and major service items.
Troubleshooting:
Systematic troubleshooting guides for common and uncommon issues, symptom-based diagnostics.
Repair Procedures:
Step-by-step repair instructions for all major vehicle systems and components.
Removal Installation:
Detailed instructions for removing and reinstalling components, from small parts to major assemblies.
Torque Settings:
Comprehensive list of essential torque specifications for critical fasteners across all systems.
Belt Routing:
Diagrams and instructions for serpentine and timing belt routing.
Fluid Specifications:
Detailed recommendations for all fluids including engine oil, transmission fluid, brake fluid, coolant, power steering fluid, and more.
Diagnostic Codes:
Listing and interpretation of Diagnostic Trouble Codes (DTCs) with associated causes and solutions.
Technical Depth
Depth:
Comprehensive, covering basic to advanced diagnostics and repair. Suitable for professional technicians and skilled DIY enthusiasts.
📊 Manual Specifications
File Format
Digital Format:
PDF (Portable Document Format)
Print Quality
Quality:
High-resolution scans of official documentation, ensuring clarity of text and diagrams.
Binding Type
Binding:
N/A (Digital PDF)
Paper Type
Paper Type:
N/A (Digital PDF)
⚙️ Engine Specifications
Primary Engine 2.7D Tdv6
Engine Code:
AJD-V6 (often referred to as 276DT)
Configuration:
2.7-liter V6 Twin-Turbo Diesel
Horsepower Ps:
204 PS (at 4000 rpm)
Torque Nm:
435 Nm (at 1900 rpm)
Primary Engine 3.0L V6
Engine Code:
306PS (Naturally Aspirated V6)
Configuration:
3.0-liter V6 Naturally Aspirated Petrol
Horsepower Ps:
238 PS (at 6800 rpm)
Torque Nm:
293 Nm (at 4100 rpm)
Primary Engine 4.2L V8
Engine Code:
4235cc V8 (Naturally Aspirated)
Configuration:
4.2-liter V8 Naturally Aspirated Petrol
Horsepower Ps:
298 PS (at 6000 rpm)
Torque Nm:
411 Nm (at 4100 rpm)
Primary Engine 4.2L V8 Xfr
Engine Code:
4235cc V8 S/C (Supercharged)
Configuration:
4.2-liter V8 Supercharged Petrol
Horsepower Ps:
510 PS (at 6000 rpm)
Torque Nm:
625 Nm (at 3500 rpm)
Fuel System
Injection Type:
Direct Injection (TDV6), Port Injection (Petrol V6 & V8), Supercharged (XFR)
🔧 Transmission
Standard Transmission
Type:
6-speed ZF Automatic (e.g., 6HP26/6HP28)
Optional Transmission
Availability:
N/A for these model years and engines; automatic was standard.
Features
Gear Modes:
Sequential shift capability, often with Adaptive Shift Control (ASC) and Winter/Sport modes.
Fluid Type
Specification:
Typically ZF Lifeguardfluid (e.g., Lifeguardfluid 6 for 6HP26/28 transmissions). Refer to manual for exact part numbers and specifications.
📐 Dimensions
Exterior
Length Mm:
Approx. 4961 mm (standard wheelbase)
Width Mm:
Approx. 1877 mm (excluding mirrors)
Height Mm:
Approx. 1461 mm
Weights
Curb Weight Kg:
Varies significantly by engine; approx. 1700-1900 kg for V6 petrol, up to 2000+ kg for V8/XFR.
🛡️ Safety Features
Ratings
Euro Ncap Score:
5 Stars (for the 2008 model year, often with optional packs)
Active Features
Electronic Stability:
Traction Control System (TCS), Dynamic Stability Control (DSC), Anti-lock Braking System (ABS), Electronic Brake-force Distribution (EBD), Emergency Brake Assist (EBA).
Passive Features
Airbags:
Front airbags, side airbags, curtain airbags, driver's knee airbag (depending on configuration).
Seatbelts:
Pretensioning front seatbelts, active front head restraints.
💡 Technology Features
Infotainment
System Name:
JaguarSense, Touchscreen Interface (depending on trim/options)
Features:
Navigation system, premium audio options (e.g., Bowers & Wilkins), Bluetooth connectivity, CD changer, iPod integration (often requiring adapter).
Driver Assistance
Features:
Adaptive Cruise Control (optional), Front and Rear Parking Aid, Blind Spot Monitoring (on later models/packages).
Connectivity
Features:
Voice control for key functions, Bluetooth hands-free calling and audio streaming.
🔧 Maintenance
Service Intervals
Engine Oil Change:
Typically every 15,000 miles or 12 months, whichever comes first (varies by engine and driving conditions; consult manual for specifics).
Transmission Fluid:
Sealed for life, but recommended change/flush every 60,000 - 100,000 miles for longevity, especially under heavy use. Consult specific manual recommendations.
Coolant Replacement:
Initial fill is often long-life; subsequent changes typically every 3-5 years or as per manual recommendations.
Fluid Specifications
Engine Oil Petrol V6 V8:
Often specified as a low-viscosity synthetic, e.g., SAE 5W-30 meeting Jaguar WSS-M2C913-C or similar API SN/ACEA A5/B5 standards. (Verify with manual)
Engine Oil Diesel Tdv6:
Often specified as SAE 5W-30 meeting ACEA C2 or C3 standards, and Jaguar WSS-M2C934-A for diesel particulate filter (DPF) compatibility. (Verify with manual)
Brake Fluid:
DOT 3 or DOT 4, depending on system. Refer to manual for exact specification and change interval.
Known Issues
Common Problems Electrical:
Water ingress into the cabin affecting electronics, issues with the electronic parking brake module, HVAC blower resistor failures.
Common Problems Mechanical:
Wear on suspension bushings leading to knocking sounds, potential for timing chain stretch (especially on early V8s), diesel particulate filter (DPF) regeneration issues on TDV6.
Common Problems Transmission:
Occasional gearbox software glitches, delayed engagement, or rough shifting; regular fluid changes are beneficial.
📚 Vehicle History
Brand Heritage
Heritage:
Jaguar Cars has a long-standing reputation for building luxurious, powerful, and stylish grand tourers and sports sedans, dating back to Sir William Lyons' vision.
Model Evolution
Predecessor:
The XF (X250) replaced the Jaguar S-Type, marking a significant departure in styling and engineering philosophy towards a more contemporary and performance-oriented design.
Production
Manufacturing Location:
Castle Bromwich Assembly Plant, Birmingham, United Kingdom.
Production Years
Generation Years:
First Generation: 2007 (as 2009 model year in some markets) - 2015.
Ao escolher uma seleção, a página inteira é atualizada.